Structural and Catalytic Activity of V2O5-Supported on AlPO4 Catalysts

Summary. A series of AlPO₄-V₂O₅ (APV) systems with various vanadia amounts 1–30mol% were prepared by the impregnation method and calcinated at 400 and 600°C for 4h. The catalysts were characterized by TG/DTG, DSC, IR spectroscopy, XRD, N₂ adsorption, and electrical conductivity measurements. The surface acidity and basicity of the catalysts were studied by the dehydration-dehydrogenation of isopropyl alcohol and the adsorption of pyridine. The catalytic gas phase esterification of acetic acid with ethyl alcohol was carried out at 210°C in a flow system at 1atm using air as a carrier gas. The results showed that the catalysts calcinated at 400°C were active and selective towards the formation of ethyl acetate whereas the calcination of samples at 600°C led to a drastic reduction in both activity and selectivity. Good correlations were obtained between catalytic activities towards ester formation and acidity of the prepared catalysts.     

Ultrasonic characterization of heavy metal TeO2–WO3–PbO glasses below room temperature

The longitudinal ultrasonic attenuation measurements have been made using pulse echo method at fundamental frequencies of 2, 4, 6 and 8 MHz in 20WO₃–(80−x) TeO₂–xPbO ternary tellurite glasses (x=10, 12.5, 15, 17.5 and 20 mol%) in the temperature range 160–280 K. The results showed the presence of a broad peak which shifts to higher temperature with increasing frequency. The ultrasonic attenuation peaks suggest that the experimental behavior is controlled by thermally activated structural relaxations. The internal friction, acoustic activation energy, deformation potential, relaxation strength, number of loss centers and density of state have been calculated both as a function of temperature and PbO content. The acoustic activation energy was found to decrease from 0.156 to 0.135 eV with the increase of PbO content. The results showed that both the number of loss centers and their activation energy decrease with the atomic ring size. An increase in the density of state is observed with addition of PbO content at the same frequency in the whole range of temperature which is associated with structural units formed when PbO is added.     

Nonlinear instability of charged liquid jets: Effect of interfacial charge relaxation

A linear and nonlinear study has been made of cylindrical interface, carrying a uniform surface charge in the presence of a finite rate of charge relaxation, is investigated by using multiple scales method. The linear stability flow is analyzed by deriving a dispersion relation for the growth waves, and solving it analytically and numerically to find marginal stability curves. We investigate the electric charge relaxation effects on the stability of the flow by considering various limiting cases. We also examine the effects of finite charge relaxation times in axisymmetric and nonaxisymmetric modes. In the nonlinear approach, it is shown that the evolution of the amplitude is governed by a Ginzburg–Landau equation. There is also obtained a nonlinear modified Schrödinger equation describing the evolution of wave packets for small charge relaxation time. Further, the classic Schrödinger equation is obtained when the influence of relaxation time charge is neglected. On the other hand, the complex amplitude of quasi-monochromatic standing waves near the cutoff wavenumber is governed by a similarly type of nonlinear Schrödinger equation in which the roles of time and space are interchanged. This equation makes it possible to estimate the nonlinear effect on the cutoff wavenumber. The nonlinear theory, when used to investigate the stability of charged liquid jet, appears accurately to predict a new unstable regions. The effects of the surface charge and charge relaxation on the stability are identified. The various stability criteria are discussed both analytically and numerically and the stability diagrams are obtained.     

Multiple parameter tuning of the bandwidth, wavelength and attenuation of a fiber-based acousto-optic tunable filter

In this paper we presented a method, which will allow multiple parameter control of the 3-dB bandwidth, center notch wavelength and attenuation level in a fiber-based acousto-optic tunable filter (AOTF). The method basically involves the variation of the interaction length, RF frequency and RF power on a single-fiber device to achieve multiple parameters tuning of the optical filter. The acousto-optic (AO) interaction inside a single-mode fiber (SMF) was studied theoretically and experimentally.     

Multiresidue analysis of pesticides with hydrolyzable functionality in cooked vegetables by liquid chromatography tandem mass spectrometry

It would be preferable for pesticide residues substituted by hydrolyzable functionality to be analyzed after cooking because their structures are apt to degrade during boiling and/or heating. A liquid chromatography–tandem mass spectrometry (LC‐MS/MS) method for the quantitative determination of 44 pesticide residues with hydrolyzable functional group in five typical vegetable widely consumed in Republic of Korea is described. The sample clean‐up was carried out according to the method of Food Code No. 83 established by the Korea Food and Drug Administration (KFDA). Zorbox XDB‐C₁₈ column was selected for the analysis because of the best peak separation. The LC mobile phase consisted of water and 5 mm methanolic ammonium formate, which resulted in a peak shape with good symmetry at each run. Tandem mass spectroscopic (MS/MS) experiments were performed in ESI positive mode and the multiple reaction monitoring modes. A conventional matrix effect was modified to more comprehensive form 100γ_ij (%). A high matrix effect (相似文献   

Studies on Fused Azoles: Synthesis of Several Polyfunctionally Substituted Fused Azoles

The synthesis of several new polyfunctionally substituted fused pyrazoles via reaction of 5‐amino‐3‐methylthio‐1H‐pyrazole‐4‐carboxylate ( 2 ) with different reagents is described.     

Treatment of the emission and absorption spectra for a Λ-type three-level atom driven by a single-mode field with nonlinearities

The treatment of a Λ-type three-level atom interacting with a single mode field in a cavity, explicitly taking the existence of forms of nonlinearities of both the field and the intensity-dependent atom-field coupling into account. Analytical expressions of the emission and absorption spectra are presented using the dressed states of the system. The characteristics of the emission and absorption spectra for binomial state and squeezedcoherent state inputs are exhibited. The effects of the mean number of photons, the detuning, and the nonlinearities on the spectra are investigated. It is shown that the features of the fluorescence and absorption spectra are influenced significantly by the kinds of nonlinearities.     

Ethanol oxidation at metal–zeolite-modified electrodes in alkaline medium. Part 2: palladium–zeolite-modified graphite electrode

Impregnated Pd–zeolite graphite (PdZG) electrodes have been tested for ethanol oxidation in 0.5 M NaOH. The results obtained have been compared with that of Pd electrode. Cyclic voltammetric and chronoamperometric measurements indicated the activity of PdZG electrode toward ethanol oxidation and poisoning tolerance. The influence of zeolite loading as well as impregnation time in Pd²⁺ solution has been examined. Scan rate effect and ethanol concentration dependency indicated that ethanol oxidation at PdZG electrode was governed by diffusion control.     

Development and Characterization of Novel Biopolymer Derived from Abelmoschus esculentus L. Extract and Its Antidiabetic Potential

Abelmoschus esculentus (Okra) is an important vegetable crop, widely cultivated around the world due to its high nutritional significance along with several health benefits. Different parts of okra including its mucilage have been currently studied for its role in various therapeutic applications. Therefore, we aimed to develop and characterize the okra mucilage biopolymer (OMB) for its physicochemical properties as well as to evaluate its in vitro antidiabetic activity. The characterization of OMB using Fourier-transform infrared spectroscopy (FT-IR) revealed that okra mucilage containing polysaccharides lies in the bandwidth of 3279 and 1030 cm⁻¹, which constitutes the fingerprint region of the spectrum. In addition, physicochemical parameters such as percentage yield, percentage solubility, and swelling index were found to be 2.66%, 96.9%, and 5, respectively. A mineral analysis of newly developed biopolymers showed a substantial amount of calcium (412 mg/100 g), potassium (418 mg/100 g), phosphorus (60 mg/100 g), iron (47 mg/100 g), zinc (16 mg/100 g), and sodium (9 mg/100 g). The significant antidiabetic potential of OMB was demonstrated using α-amylase and α-glucosidase enzyme inhibitory assay. Further investigations are required to explore the newly developed biopolymer for its toxicity, efficacy, and its possible utilization in food, nutraceutical, as well as pharmaceutical industries.