Bioactive Components of Salvia and Their Potential Antidiabetic Properties: A Review

The utilization of therapeutic plants is expanding around the globe, coupled with the tremendous expansion of alternative medicine and growing demand in health treatment. Plants are applied in pharmaceuticals to preserve and expand health—physically, mentally and as well as to treat particular health conditions and afflictions. There are more than 600 families of plants identified so far. Among the plants that are often studied for their health benefit include the genus of Salvia in the mint family, Lamiaceae. This review aims to determine the bioactive components of Salvia and their potential as antidiabetic agents. The search was conducted using three databases (PubMed, EMBASE and Scopus), and all relevant articles that are freely available in the English language were extracted within 10 years (2011–2021). Salvia spp. comprises many biologically active components that can be divided into monoterpenes, diterpenes, triterpenes, and phenolic components, but only a few of these have been studied in-depth for their health benefit claims. The most commonly studied bioactive component was salvianolic acids. Interestingly, S. miltiorrhiza is undoubtedly the most widely studied Salvia species in terms of its effectiveness as an antidiabetic agent. In conclusion, we hope that this review stimulates more studies on bioactive components from medicinal plants, not only on their potential as antidiabetic agents but also for other possible health benefits.     

Facile synthesis and antimicrobial evaluations of some novel pyrazolo[3,4-b]selenolo[3,2-e]pyrazines and their related heterocycles

A new series of pyrazolopyrazinoselenolotriazolopyrimidines was synthesized by a facile method based on condensation of 5-amino-3-methyl-1-phenyl-1H-pyrazolo[3,4-b]selenolo[3,2-e]pyrazine-6-carbonitrile ( 3 ) with triethyl orthoformate followed by intramolecular cyclization with hydrazine to afford 7-amino-8-imino-3-methyl-1-phenyl-1,8-dihydro-7H-pyrazolo[3″,4″:5′,6′]pyrazino[2′,3′:4,5] selenolo[3,2-d]pyrimidine ( 5 ). The latter compound was utilized as a multipurpose precursor for the construction of other new triazoles fused to the pyrazolopyrazino- selenolopyrimidine moiety. Alternatively, acetylation and chloro-acetylation of compound 3 using acetic anhydride and chloroacetyl chloride yielded the acetyl amino 11 and chloroacetamido 12 derivatives, respectively. Compound 12 underwent nucleophilic substitution upon reaction with morpholine to provide the morpholinyl acetamide 13 . Furthermore, the pyrazolopyridoselenolopyrazine ring system 14 was synthesized by the reaction of the o-amino-carbonitrile 3 with malononitrile. Assignment of the chemical structures for the new compounds was confirmed depending on elemental and spectral techniques. On the other hand, most of the synthesized compounds revealed promising results against various bacterial and fungal strains.     

Gel-assisted synthesis of anatase TiO2 nanoparticles and application for electrochemical determination of L-tryptophan

Anatase titanium dioxide nanoparticles (TiO₂-NPs) were synthesized with and without gelatin via the sol-gel method. The TiO₂-NPs were characterized by a number of techniques, such as thermogravimetric analysis (TGA), X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FT-IR) and ultraviolet visible spectroscopy (UV-Vis). The particle sizes of the TiO₂-NPs prepared with and without gelatin were ～13 and ～17 nm, respectively. The main advantage of using gelatin as a stabilizing agent is that it provides long-term stability for nanoparticles by preventing particles agglomeration. The results indicated that gelatin was a reliable green stabilizer, which can be used as a polymerization agent in the sol-gel method for synthesis of tiny size TiO₂-NPs. Moreover, the composite film was prepared by synthesized TiO₂-NPs nanoparticles and multi wall carbon nanotube (MWNT) on glassy carbon electrode (TiO₂-MWNT/GCE). The TiO₂-MWNT/GCE responded linearly to L-tryptophan (L-Trp) in the concentration of 1.0 × 10^?6 to 1.5 × 10^?4 M with detection limit of 5.2 × 10^?7 M at 3 using amperometry. The studied sensor exhibited good reproducibility and long-term stability.     

Thermal properties of mercury(II) and palladium(II) purine and pyrimidine complexes

Six solid Pd(II) and Hg(II) complexes of some purines and pyrimidines have been prepared and characterized by elemental analyses, IR, UV–Vis spectra, magnetic measurements, and thermal analyses. The data suggest tetrahedral and square planar geometries for mercury and palladium complexes, respectively. The thermal behavior of the complexes has been studied applying TG, DTA, and DSC techniques, and the thermodynamic parameters and mechanisms of the decompositions were evaluated. The ?S* values of the decomposition steps of the metal complexes indicated that the activated fragments have more ordered structure than the undecomposed complexes, and/or the decomposition reactions are slow. The thermal processes proceeded in complicated mechanisms where the bond between the central metal ion and the ligands dissociates after losing small molecules such as H₂O, HCl or C=O. The palladium adenine complex is ended with the metal as a final product. However, the thermal reactions of the other five palladium and mercury pyrimidines complexes are ended with metal bonded to O, N, or S of the pyrimidine ring.     

Preparation of multiwall carbon nanotubes (MWCNTs) stabilised by highly branched hydrocarbon surfactants and dispersed in natural rubber latex nanocomposites

The performance of single-, double- and triple-chain anionic sulphosuccinate surfactants for dispersing multiwall carbon nanotubes (MWNCTs) in natural rubber latex (NR-latex) was studied using a range of techniques, including field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and Raman spectroscopy. The conductivities of the nanocomposites were also investigated using four-point probe measurements. Here, MWCNTs were efficiently dispersed in NR-latex with the aid of hyperbranched tri-chain sulphosuccinate anionic surfactants, specifically sodium 1,4-bis(neopentyloxy)-3-(neopentyloxycarbonyl)-1,4-dioxobutane-2-sulphonate (TC14). This paper highlights that TC14 performs much better than that of the commercially available surfactant sodium dodecyl sulphate (SDS), demonstrating how careful consideration of surfactant architecture leads to improved dispersibility of MWCNTs in NR-latex. The results should be of significant interest for improving nanowiring applications suitable for aerospace-based technology.     

Green synthesis of bio-ethyl acetate over Egyptian natural red clay as a highly active,selective, and eco-friendly catalyst

The present work focused on the utilization of Egyptian red clay (ERC) without any treatment as a highly efficient, selective, and eco-friendly catalyst for synthesis of bio-ethyl acetate in the gas phase. The best conditions used in conventional fixed bed reactor were 130 cm³/min total flow rate of air with 1.6 and 2.1 vol% bio-ethanol and bio-acetic acid, respectively, 1 g clay catalyst calcined at 300 and 225°C reaction temperature. Under these conditions, the conversions to ester achieved were about 80 and 98% after 5 and 30 min, respectively, from the initial admission of the reactants into the reactor. The amount and type of surface acidity were identified by isopropanol reaction and chemisorption of basic probes. The results demonstrated that the majority of intermediate strength of BrØnsted acid sites are the key role for the dehydration reaction toward ester formation. The virgin and annealed clay solids were characterized using X-ray fluorescence (XRF), thermogravimetry (TG) and differential thermal analysis (DTA), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and N₂ sorption.     

Synthesis and antidiabetic activity of novel triazole derivatives containing amino acids

New series of triazole derivatives coupled with amino acids 1a-h were obtained via multicomponent reaction of 2-hydroxy benzaldehyde or 2-hydroxy acetophenone with thiosemicarbazide and different amino acids. The obtained compounds were reacted with p-toluinesulfonyl chloride 2 to give the corresponding sulfonamides 3a-h . Compound 1b was allowed to react with different aromatic aldehydes or cyclic ketone under alkaline conditions to afford the expected imino compounds 4a-d and 6a-c , respectively. These compounds were allowed to react with ethyl glycolate to yield the expected thiazolidinone derivatives 5a-d or 7a-c , respectively. Structures of the newly synthesized compounds were found to be in accordance with their elemental analyses and spectral data. The obtained compounds exhibited very prominent in vitro and in vivo antihyperglycemic effect at a dose of 40 mg/kg body weight compared to the standard drug gliclazide and control. The antidiabetic effect was investigated using oral glucose tolerance test in normal and non-insulin-dependent diabetes mellitus (NIDDM) in STZ-rat model. Compounds 3a - h , 5b , 5c , 5d , 7a , 7b , and 7c showed significant activity in lowering blood glucose (more than 80%) compared to the NIDDM control.     

Molecularly Imprinted Impedimetric Sensor for Determination of Mycotoxin Zearalenone

The mycotoxin zearalenone (ZEA) prompts reproductive toxicity due to its strong estrogenic effects. In this work, an electrochemical sensor for determination of ZEA was developed by electropolymerization of a molecularly imprinted poly (o‐phenylenediamine) (PPD) film on screen‐printed gold electrode (SPGE) surface. The sensor was examined by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) using K₃[Fe(CN)₆]/K₄[Fe(CN)₆] as redox probe. The molecularly imprinted polymer (MIP) sensor showed a wide determination range from 2.50 to 200.00 ngmL^?1 for ZEA. The Limit of detection (LOD) was calculated to be 0.20 ngmL^?1, based on the signal to noise (S/N) ratio equal to 3.0. The sensor displayed good repeatability, with RSD values≤4.6 %, and maintained 93.2 % of its initial response after storage for 10 days in air at room temperature. The developed method was successfully applied for the determination of ZEA in corn flakes with mean recoveries ranged from 96.2 % to 103.8 % and RSDs within the interval of 2.1 % to 3.8 %.     

Design,Synthesis, and Molecular Docking of Paracyclophanyl-Thiazole Hybrids as Novel CDK1 Inhibitors and Apoptosis Inducing Anti-Melanoma Agents

Three new series of paracyclophanyl-dihydronaphtho[2,3-d]thiazoles and paracyclophanyl-thiazolium bromides were designed, synthesized, and characterized by their spectroscopic data, along with X-ray analysis. One-dose assay results of anticancer activity indicated that 3a–e had the highest ability to inhibit the proliferation of different cancer cell lines. Moreover, the hybrids 3c–e were selected for five-dose analyses to demonstrate a broad spectrum of antitumor activity without apparent selectivity. Interestingly, series I compounds (Z)-N-substituted-4,9-dihydronaphtho[2,3-d]thiazol-3(2H)-yl)-4′-[2.2]paracyclophanylamide) that are carrying 1,4-dihydronaphthoquinone were more active as antiproliferative agents than their naphthalene-containing congeners (series II: substituted 2-(4′-[2.2]paracyclophanyl)hydrazinyl)-4-(naphth-2-yl)-thiazol-3-ium bromide hybrids) and (series III: 3-(4′-[2.2]paracyclophanyl)amido-2-(cyclopropylamino)-4-(naphth-2-yl)thiazol-3-ium bromide) toward the SK-MEL-5 melanoma cell line. Further antiproliferation investigations of 3c and 3e on the healthy, normal unaffected SK-MEL-5 cell line indicated their relative safety. Compound 3c showed an inhibition of eight isoforms of cyclin-dependent kinases (CDK); however, it exhibited the lowest IC₅₀ of 54.8 nM on CDK1 in comparison to Dinaciclib as a reference. Additionally, compound 3c revealed a remarkable downregulation of phospho-Tyr15 with a level (7.45 pg/mL) close to the reference. 3c mainly showed cell cycle arrest in the pre-G1 and G2/M phases upon analysis of the SK-MEL-5 cell line. The sequential caspase-3 assay for 3c indicated a remarkable overexpression level. Finally, a molecular docking study was adopted to elucidate the binding mode and interactions of the target compounds with CDK1.     

Magnetic molecularly imprinted specific solid‐phase extraction for determination of dihydroquercetin from Larix griffithiana using HPLC

The naturally occurring quercetin flavonoid, dihydroquercetin, is widely distributed in plant tissues and has a variety of biological activities. Herein, a magnetic molecularly imprinted solid‐phase extraction was tailor made for selective determination of dihydroquercetin in Larix griffithiana using high‐performance liquid chromatography. Amino‐functionalized core‐shell magnetic nanoparticles were prepared and characterized using scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry, and infrared spectroscopy. The polymer had an average diameter of 250 ± 2.56 nm and exhibited good stability and adsorption for template molecule, which is enriched by hydrogen bonding interaction. Multiple factors for extraction, including loading, washing, elution solvents, and extraction time, were optimized. The limit of detection was 1.23 μg/g. The precision determined at various concentration of dihydroquercetin was less than 4% and the mean recovery was between 74.64 and 101.80%. It has therefore been shown that this protocol can be used as an alternative extraction to quantify dihydroquercetin in L. griffithiana and purify quercetin flavonoid from other complex matrices.