Simplified Approach to the Uncatalyzed Knoevenagel Condensation and Michael Addition Reactions in Water using Microwave Irradiation

Use of microwave irradiation in the synthesis of arylidenemalononitrile and benzopyran derivatives in water without catalyst is a clean method with high yield.     

Novel Cyanoketene N,S‐Acetals and Pyrazole Derivatives using Potassium 2‐Cyanoethylene‐1‐thiolates

Novel ketene N,S‐acetals 3 were readily prepared by the reaction of cyanoacetamide or cyanothioacetamide with phenylisothiocyanate in the presence of potassium hydroxide, followed by alkylation of the produced salts with methyl iodide. The reaction of compounds 3 with hydrazines afforded different substituted pyrazoles 6.     

Corrosion inhibition of zinc in aqueous acidic media using a novel synthesized Schiff base – an experimental and theoretical study

Abstract

The kinetics of H₂ production during Zn corrosion in 0.5?M HCl without and with various additives of N,N'-bis-(1-hydroxyphenylimine)-2,5-thiophenedicarboxaldehyde (HPTD) was studied using gasometry and electrochemical techniques. The surface of the corroded Zn samples was investigated using SEM and Optical Profilometry. The rate of H₂ production (RHP) increased with the immersion time and temperature. Presence of HPTD mitigated RHP due to an adsorption process. The electrochemical impedance spectroscopy showed that HPTD had a good inhibitive effect. Polarization data proved that HPTD acted as a surface-active mixed-type inhibitor. Some thermodynamic parameters were deduced and discussed. Theoretical calculations were also conducted to corroborate the capability of HPTD to protect Zn surface from corrosion process.     

Synthesis,Characterization, and Antimicrobial Activity of Carboxymethyl Chitosan-Graft-Poly(N-acryloyl,N′-cyanoacetohydrazide) Copolymers

Carboxymethyl chitosan was grafted with N-acryloyl,N′-cyanoacetohydrazide in homogenous aqueous phase using potassium persulfate initiator. The maximum grafting yield achieved was 448% at 0.03 mol/L potassium persulfate, 0.75 mol/L N-acryloyl,N′-cyanoacetohydrazide, and 60°C within 2 h. The grafted copolymers showed better thermal stability than that of carboxymethyl chitosan. The samples with percent grafting values up to 98% were soluble in water, but a higher grafting extent resulted in insoluble copolymers. The grafted copolymers are nontoxic materials and showed an inhibition effect on both Escherichia coli and Staphylococcus aureus bacteria and Aspergillus flavus and Candida albicans fungi better than those of chitosan and carboxymethyl chitosan themselves.     

Synthesis of some new pyrimidine derivatives and evaluation of their anticancer and antibacterial activities

Starting from the reaction of ethyl cyanoacetate with thiourea and the appropriate aldehydes, a series of new pyrimidine derivatives were prepared. Ten selected pyrimidine derivatives were subjected to a screening system for the investigation of their antitumor potency against liver (HEPG2) cell line. The antitumor activity results indicated that most of the selected pyrimidine derivatives showed moderate growth inhibition activity against the tested cell line, but with varying intensities in comparison to the known anticancer drugs: 5-fluorouracil and doxorubicin. Some of the synthesized compounds were also tested for their antimicrobial activity against bacteria as well as fungal isolates.     

Asymmetric aldol reactions catalyzed by the promiscuous aldo–ketoreductase enzyme

The promiscuous aldo–ketoreductase (AKR) enzyme is used as a sustainable biocatalyst for the first time to catalyze asymmetric aldol reactions in aqueous medium. The reactions between aromatic aldehydes and cyclic/acyclic ketones give the corresponding products in moderate yields and enantioselectivities in the presence of water. The influence of solvents, the mole ratio of substrates, and enzyme concentration are investigated. The mechanism of the AKR1A1-catalyzed aldol reaction is also discussed.     

Preparation and Characterization of Modified Cellulose Adsorbents with High Surface Area and High Adsorption Affinity for Hg(II)

Cellulose was modified via chlorination using phosphorous oxychloride followed by functionalization with amine and thiol moieties. The obtained modified cellulose samples were investigated by means of FTIR, TGA, TEM, and nitrogen-adsorption surface area (BET). The BET measurements showed a remarkable increase in the surface area of Cell-N-S (477.7 m²/g) and Cell-N (706 m²/g). The resins gave an uptake capacities of 38 and 7.2mmol/g for Cell-N-S and Cell-N, respectively toward Hg(II) from its solutions. These values are considered much better compared with other reported resins. Regeneration of the resins was achieved effectively using acidified thiourea.     

Efficient Catalytic and Thermal Syntheses of Novel Thiadiazole,Triazole, Benzothiazole,and Fused Quinazoline Derivatives

Russian Journal of Organic Chemistry - A thiourea derivative, 4-chloro-N-[(4-chlorophenyl)carbamothioyl]benzamide, was oxidized with iodine in acetic acid to give the corresponding disulfide,...     

Adsorption of cationic methylene blue dye using microwave-assisted activated carbon derived from acacia wood: Optimization and batch studies

This study assesses the performance of optimized acacia wood-based activated carbon (AWAC) as an adsorbent for methylene blue (MB) dye removal in aqueous solution. AWAC was prepared via a physicochemical activation process that consists of potassium hydroxide (KOH) treatment, followed by carbon dioxide (CO₂) gasification under microwave heating. By using response surface methodology (RSM), the optimum preparation conditions of radiation power, radiation time, and KOH-impregnation ratio (IR) were determined to be 360 W, 4.50 min, and 0.90 g/g respectively, which resulted in 81.20 mg/g of MB dye removal and 27.96% of AWAC’s yield. Radiation power and IR had a major effect on MB dye removal while radiation power and radiation time caused the greatest impact on AWAC’s yield. BET surface area, mesopore surface area, and pore volume of optimized AWAC were found to be 1045.56 m²/g, 689.77 m²/g, and 0.54 cm³/g, respectively. Adsorption of MB onto AWAC followed Langmuir and pseudo-second order for isotherm and kinetic studies respectively, with a Langmuir monolayer adsorption capacity of 338.29 mg/g. Mechanism studies revealed that the adsorption process was controlled by film diffusion mechanism and indicated to be thermodynamically exothermic in nature.     

Discovery of New Coumarin-Based Lead with Potential Anticancer,CDK4 Inhibition and Selective Radiotheranostic Effect: Synthesis, 2D & 3D QSAR,Molecular Dynamics,In Vitro Cytotoxicity,Radioiodination, and Biodistribution Studies

Novel 6-bromo-coumarin-ethylidene-hydrazonyl-thiazolyl and 6-bromo-coumarin-thiazolyl-based derivatives were synthesized. A quantitative structure activity relationship (QSAR) model with high predictive power r² = 0.92, and RMSE = 0.44 predicted five compounds; 2b, 3b, 5a, 9a and 9i to have potential anticancer activities. Compound 2b achieved the best ΔG of –15.34 kcal/mol with an affinity of 40.05 pki. In a molecular dynamic study 2b showed an equilibrium at 0.8 Å after 3.5 ns, while flavopiridol did so at 0.5 Å after the same time (3.5 ns). 2b showed an IC₅₀ of 0.0136 µM, 0.015 µM, and 0.054 µM against MCF-7, A-549, and CHO-K1 cell lines, respectively. The CDK4 enzyme assay revealed the significant CDK4 inhibitory activity of compound 2b with IC₅₀ of 0.036 µM. The selectivity of the newly discovered lead compound 2b toward localization in tumor cells was confirmed by a radioiodination biological assay that was done via electrophilic substitution reaction utilizing the oxidative effect of chloramine-t. ¹³¹I-2b showed good in vitro stability up to 4 h. In solid tumor bearing mice, the values of tumor uptake reached a height of 5.97 ± 0.82%ID/g at 60 min p.i. ¹³¹I-2b can be considered as a selective radiotheranostic agent for solid tumors with promising anticancer activity.