Influence of the halogen ligand on the near-UV-visible spectrum of [Ru(X)(Me)(CO)2(alpha-diimine)] (X = Cl, I; alpha-diimine = Me-DAB, iPr-DAB; DAB = 1,4-diaza-1,3-butadiene): an ab initio and TD-DFT analysis

The near-UV-vis electronic spectroscopy of [Ru(X)(Me)(CO)(2)(iPr-DAB)] (X = Cl or I; iPr-DAB = N,N'-di-isopropyl-1,4-diaza-1,3-butadiene) is investigated through CASSCF/CASPT2 and TD-DFT calculations on the model complexes [Ru(X)(Me)(CO)(2)(Me-DAB)] (X = Cl or I). Convergence of the calculated transition energies for the low-lying metal-to-ligand charge-transfer (MLCT), X-to-ligand charge-transfer (XLCT, X halide ligand), or sigma-bond-to-ligand charge-transfer (SBLCT) to experimental values is analyzed for both methods. On the basis of these accurate calculations, it is shown that whereas the lowest singlet state can be assigned to a nearly pure XLCT state in [Ru(I)(Me)(CO)(2)(Me-DAB)], its character is mainly MLCT in [Ru(Cl)(Me)(CO)(2)(Me-DAB)]. These results are in agreement with time-resolved emission/IR and resonance Raman experimental data. The experimental UV-vis bands are well reproduced by the CASSCF/CASPT2 calculations. The TD-DFT transition energies to the long-range charge transfer states are dramatically affected by the nature of the functional, with lowering leading to meaningless values in the case of nonhybrid functionals. Both methods reproduce well the red shift of the absorption bands on going from the chloride to the iodide complex as well as the shift of the strongly absorbing higher MLCT transition from the visible to the UV domain of energy.     

Spectroscopic investigation and thermal behavior of new carbonyl complexes [M(CO)4(N—N)(CuX)], (M = W,Mo; N—N = 2,2′-bipyridine, 1,10-phenanthroline; X = Cl,SCN)

[M(CO)₄(N—N)] reacts with CuCl to give new heterobimetallic metal carbonyls of the type [M(CO)₄(N—N)(CuCl)], M = W, Mo; N—N = 2,2-bipyridine (bipy), 1,10-phenanthroline (phen). Reactions of [M(CO)₄(N—N)(CuCl)] with NaSCN produced the series of complexes of general formula [M(CO)₄(N—N)(CuSCN)]. The i.r. spectral of all the bimetallic carbonyls exhibited the general four (CO) band patterns of the precursors. The u.v.–vis. spectral data for precursors and products showed bands associated with * (nitrogen ligands), dd (intrametal), as well as MLCT d* (nitrogen ligands) and MLCT d *(CO) transitions. The [M(CO)₄(N—N)(CuX)] (X = Cl, SCN) emission spectra showed only one band associated with the MLCT transition. The t.g. curves revealed a stepwise loss of CO groups. The initial decomposition temperatures of the [M(CO)₄(N—N)(CuX)] series suggest that the bimetallic compounds are indeed thermally less stable than their precursors, and the X-ray data showed the formation of MO₃, CuMO₄, Cu₂O and CuO as final decomposition products, M = W, Mo. The spectroscopic data suggests that the heterobimetallic compounds are polymeric.     

Ion chromatographic analysis of cyanate in gold processing samples containing large concentrations of copper(I) and other metallocyanide complexes

An ion chromatographic (IC) method was developed for the determination of cyanate in gold cyanidation samples containing large concentrations of metallo-cyanide complexes. The analysis was performed on a Waters HC IC-Pak A anion-exchange column with an anthranilic acid eluent, with detection achieved using indirect UV at 355 nm. Two procedures were developed for removal of the metallo-cyanide complexes prior to the IC analysis. The first was a manual off-line method which used solid-phase extraction cartridges containing a strong anion-exchange resin to trap the complexes and to then enable determination of cyanate without interference. In the second approach, an automated on-line method was developed which used an anion-exchange guard column to trap the complexes and a column switching valve to allow backflushing of the cyanate from the guard column. This enabled the total analysis to be performed in a time of 10–14 min, depending on the sample composition. Finally, a comparison of results obtained by the standard Kjeldahl nitrogen method for cyanate and the IC method revealed an interference in the Kjeldahl method for samples containing large concentrations of Cu(I)-cyanide complexes.     

Synthetic Strategies To Obtain V-P-O Open Frameworks Containing Organic Species as Structural Directing Agents. Crystal Structure of the V(IV)-Fe(III) Bimetallic Phosphate [H(3)N(CH(2))(2)NH(3)](2)[H(3)N(CH(2))(2)NH(2)][Fe(III)(H(2)O)(2)(V(IV)O)(8)(OH)(4)(HPO(4))(4)(PO(4))(4)].4H(2)O

A general synthetic approach to rationalize the solution preparative chemistry of oxovanadium phosphates containing organic species as structural directing agents is presented. Careful attention is payed to the hydrolysis and condensation processes involving the ionic species in solution, and a simple restatement of the partial charge model (PCM) has been used in order to organize the experimental results. The structure of a new V(IV)-Fe(III) bimetallic oxovanadium phosphate, [H(3)N(CH(2))(2)NH(3)](2)[H(3)N(CH(2))(2)NH(2)] [Fe(III)(H(2)O)(2)(V(IV)O)(8)(OH)(4)(HPO(4))(4)(PO(4))(4)].4H(2)O, has been determined by X-ray single crystal diffraction methods. This compound crystallizes in the monoclinic system, space group P2(1)/n and the cell dimensions are as follows: a = 14.383(3) ?, b = 10.150(2) ?, c = 18.355(4) ?, and beta = 90.39(3) degrees (Z = 2). The existence of a complex intercrossing channel system, including a very large channel of 18.4 ? of diameter (in which both water molecules and ethylenediamine species are located), is the more interesting feature of this structure. Thermal decomposition, including the dehydration/rehydration process, has been studied by thermal analysis and variable temperature X-ray powder diffraction techniques. A complementary SEM study of the different intermediate decomposition products is presented.     

Crystal Structure of a New Ammonium Potassium Selenomolybdate Compound K3.31(NH4)0.69[Se2Mo5O21]·2H2O

An inorganic compound formulated as K_3.31(NH₄)_0.69[Se₂Mo₅O₂₁]·2H₂O has been synthesized by conventional solution method and characterized by scanning electron microscopy, IR, UV-Vis spectroscopies behaviors. The structure of the title compound has been determined from a single-crystal X-ray diffraction. It crystallizes in the monoclinic space group P2₁/n, with a?=?9.9371(2) ?, b?=?23.3545(2) ?, c?=?10.5179(2) ?, β?=?114.12(3)°, V?=?2227.7(5) ?³ and Z?=?4. It was revealed that the Strandberg-type polyoxoselenomolybdate cluster can be considered as a ring formed by five distorted edge- and corner-sharing MoO₆ octahedra, capped on both poles by a selenate pyramids sharing three vertices with the ring molybdenum centers. The Strandberg clusters are connected with ammonium ions and water molecules through hydrogen-bonding interactions which ensure the cohesion of the structure into a three-dimensional network.     

Silicon‐containing trifunctional and tetrafunctional cyanate esters: Synthesis,cure kinetics,and network properties

The synthesis and physical properties of new silicon‐containing polyfunctional cyanate ester monomers methyl[tris(4‐cyanatophenyl)]silane and tetrakis(4‐cyanatophenyl)silane, as well as polycyanurate networks formed from these monomers are reported. The higher crosslinking functionality compared to di(cyanate ester) monomers enables much higher ultimate glass transition temperatures to be obtained as a result of thermal cyclotrimerization. The ability to reach complete conversion is greatly enhanced by cocure of the new monomers with di(cyanate ester) monomers such as 1,1‐bis(4‐cyanatophenyl)ethane. The presence of silicon in these polycyanurate networks imparts improved resistance to rapid oxidation at elevated temperatures, resulting in char yields as high as 70% under nitrogen and 56% in air in the best‐performing networks. The water uptake in the silicon‐containing networks examined is 4–6 wt % after 96 h of immersion at 85 °C, considerably higher than both carbon‐containing and/or di(cyanate ester) analogs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 767–779     

A new distance measure including the weak preference relation: Application to the multiple criteria aggregation procedure for mixed evaluations

We introduce a new distance measure between two preorders that captures indifference, strict preference, weak preference and incomparability relations. This measure is the first to capture weak preference relations. We illustrate how this distance measure affords decision makers greater modeling power to capture their preferences, or uncertainty and ambiguity around them, by using our proposed distance measure in a multiple criteria aggregation procedure for mixed evaluations.     

Double Orthogonal Click Reactions for the Development of Antimicrobial Peptide Nanotubes

A new class of amphipathic cyclic peptides, which assemble in bacteria membranes to form polymeric supramolecular nanotubes giving them antimicrobial properties, is described. The method is based on the use of two orthogonal clickable transformations to incorporate different hydrophobic or hydrophilic moieties in a simple, regioselective, and divergent manner. The resulting cationic amphipathic cyclic peptides described in this article exhibit strong antimicrobial properties with a broad therapeutic window. Our studies suggest that the active form is the nanotube resulted from the parallel stacking of the cyclic peptide precursors. Several techniques, CD, FTIR, fluorescence, and STEM, among others, confirm the nanotube formation.