Chemical depth profiling and 3D reconstruction of III–V heterostructures selectively grown on non‐planar Si substrates by MOCVD

The chemical characterization of novel 3D architectures with nanometre‐scale dimensions is extremely challenging. The chemical composition of InGaAs/AlAs quantum wells selectively grown in SiO₂ trenches, 100–300 nm wide, is studied. Combining high lateral resolution 3D ToF‐SIMS analysis and Auger measurements, the chemical composition of individual trenches was obtained confirming the uniformity of these III–V heterostructures. These results correlate well with an average approach using SIMS depth profiling. The effects of ion beam orientation on the surface topography of confined structures were highlighted. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Synergistic effect of methyl phenyl silicone resin and DOPO on the flame retardancy of epoxy resins

Polymers based on styrene (STY) and divinylbenzene (DVB) are widely used for water treatment. The chemical modification of these materials, with the introduction of chemical groups, increases their selectivity for certain types of contaminants. The incorporation of magnetic particles makes these systems useful for removing contaminants from aquifers, due to their magnetic attraction of certain residues. In this work, STY–DVB resins (unmodified, sulfonated, and impregnated with nickel and cobalt particles) were analyzed by thermogravimetry. The thermal stabilities of all the samples were compared, showing that sulfonation reduces the thermal stability of the resin, but the incorporation of metal particles restores that stability, with the extent of this recovery depending on the type of metal. This result shows that even when the incorporation of metal particles does not involve removal of contaminants by magnetic attraction, this inclusion is still justified because it increases the material’s thermal stability and also makes it more efficient for removing certain types of non-metallic contaminants, as observed in a previous study. Besides this, the thermogravimetric analysis was highly useful to ascertain the changes caused to the materials, including allowing inferences on the semi-quantitative results of the degree of sulfonation and confirming that metal compounds are not only physical mixtures.     

微尺度下壁面粗糙度对面向导热影响研究

随着空间尺度的缩小,界面对导热的影响就会越来越明显。本文采用非平衡分子动力学模拟方法模拟了壁面的粗糙度对面向导热的影响,并给出微尺度下的粗糙度定义。在模拟中构造了不同的壁面粗糙度,得到了面向热导率随着壁面粗糙度增加而减小的结果。分析认为壁面的镜面反射率随着粗糙度增加而减小,而镜面反射率减小将导致热导率下降．     

用浓度调制光谱法测量水汽辉光放电中OH和H2O的布居数变化

本文使用波长为2.8 μm的分布式反馈激光器来测量水汽辉光放电产生的物种. 使用浓度调制光谱仅观察到OH自由基和瞬态H₂O分子的吸收光谱. 吸收峰的强度和方向随解调相位而变化,但是H₂O的一个吸收峰的方向始终与其它峰相反. OH和H₂O的不同光谱取向反映了能级中粒子数量的增加或减少. 如果在放电过程中可以检测到更多的瞬态物种,则可以更好地研究H₂O的激发、电离和分解动力学. 研究表明,浓度调制光谱的解调相位关系可以用来研究分子能级的布居数变化.     

Hyperchaos,quasi-period and coexisting behaviors in second-order-memristor-based jerk circuit

The European Physical Journal Special Topics - This paper generalizes a second-order-memristor-based jerk circuit, which is achieved by substituting the first-order memristor contained diode-bridge...     

Dynamics of a Predator-Prey Model with Allee Effect and Herd Behavior

This paper deals with dynamics of a predator-prey model with Allee effect and herd behavior. We first study the stability of non-negative constant solutions for such system. We also establish the existence of Hopf bifurcation solutions for such predator-prey model. The stability and bifurcation direction of Hopf bifurcation solution in the case of spatial homogeneity are further discussed. At the same time, several examples are given by MATLAB. Finally, the numerical simulations of the system are carried out through MATLAB, which intuitively verifies and supplements the theoretical analysis results.     

多肽聚合物合成新方法及生物医学应用

多肽聚合物是以多肽为主链的合成聚合物,由于其固有的生物相容性和生物降解性,在生物医学领域展现出广阔的应用前景,然而多肽聚合物的高效、快速、简便合成仍然具有很大挑战。近年来随着合成化学的快速发展,基于α-氨基酸的N-羧基环内酸酐(NCA)开环聚合法制备多肽聚合物取得了突破性进展,合成了大量基于多肽聚合物的新型材料。本文首先介绍了NCA单体的合成机理及最新改进,然后重点介绍了近年来新发展的NCA开环聚合快速、高效制备多肽聚合物的不同引发或催化体系,最后简要介绍了多肽聚合物在抗菌剂、药物递送及组织工程等领域的应用,并提出了多肽聚合物材料在生物医学领域应用所面临的挑战。     

Carbonylative Stille coupling reactions of benzyl chlorides with allyltributylstannane catalyzed by palladium nanoparticles

The carbonylative Stille coupling reaction of benzyl chlorides with allyltributylstannane was successfully conducted by using palladium nanoparticles as the catalyst under phosphine ligand-free conditions. The corresponding α,β-unsaturated ketone products were obtained in good to excellent yields.     

钛硅沸石中的一种非活性钛物种

Synthesis of the titanium silicalite TS-1 was first reported by Taramasso et al[1]in 1983. TS-1 has received considerable interest during the last decade because of its unique catalytic properties in oxidation reactions involving H2O2 as the oxidant. It is accepted that the extraframework Ti species in TS-1 favor the decomposition of H2O2and should be avoided. But in the present study, it was observed that there was a kind of Ti species inactive in both the oxidation reaction and the decomposition of H2O2.     

基于纳米金探针和基因芯片的DNA检测新方法

运用荧光纳米金探针和基因芯片杂交建立一种新的DNA检测方法. 荧光纳米金探针表面标记有两种DNA探针: 一种为带有Cy5荧光分子的信号探针BP1, 起信号放大作用; 另一种为与靶DNA一部分互补的检测探针P532, 两种探针比例为5∶1. 当靶DNA存在时, 芯片上捕捉探针(与靶DNA的另一部分互补)通过碱基互补配对结合靶DNA, 将靶DNA固定于芯片上; 荧光纳米金探针通过检测探针与靶DNA及芯片结合, 在芯片上形成“三明治”复合结构, 最后通过检测信号探针上荧光分子的信号强度来确定靶DNA的量. 新方法检测灵敏度高, 可以检测浓度为1 pmol/L的靶DNA, 操作简单, 检测时间短. 通过改进纳米金探针的标记和优化杂交条件, 可进一步提高核酸检测的灵敏度, 这将在核酸检测方面具有重要的应用价值.