曲面相机阵列多分辨成像方法

针对现有成像系统因数据冗余而无法兼顾大视场、高分辨、高效性的问题,结合人眼视网膜变分辨成像和并列式复眼成像原理,设计一种多分辨率成像的复合仿生成像系统.该成像系统按照球面和平面兼顾的曲面布局方式,利用11个相机镜头构建相机阵列,组成了四个等级分辨率的子眼拍摄模块.通过物距100 m的远景实验和物距10 m的近景实验发现,该系统在实现高分辨成像的同时,获得总视场达150.8°×37.8°.多分辨率成像实验结果表明,该系统获取的图像的分辨率从中心视场到边缘视场逐渐降低,并且相较于中心清晰全视场成像,四级分辨率成像的拼接图像数据量减少了17.2倍的数据冗余.     

浮升力和流动加速对超临界CO2管内流动传热影响

基于单相流体的概念,超临界流体的异常传热行为已经被研究很多年了,但是关于其流动传热机理仍没有统一的认识.本文通过理论分析和实验研究了超临界二氧化碳在竖直管内向上流动过程中,浮升力和流动加速效应对其流动结构和传热过程的影响.结果表明,没有确凿的实验证据表明超临界流体的异常传热行为是浮升力和流动加速直接导致的,存在的估计浮升力和流动加速效应准则均是在常物性流体的基础上,做了大量假设得出的,不同的研究者采用浮升力和流动加速准则分析超临界流体的传热恶化得出的结论不一致.最后,基于拟沸腾理论分析超临界流体的传热恶化过程,提出超临界沸腾数区分了超临界流体正常传热与恶化传热的转换边界,为超临界流体流动传热研究提供新思路,超临界沸腾数对建立用于不同技术的超临界流体动力循环的最佳运行条件具有重要意义.     

Quantum Thermalization and Vanishing Thermal Entanglement in the Open Jaynes–Cummings Model

The quantum thermalization of the Jaynes–Cummings (JC) model in both equilibrium and non-equilibrium open-system cases is studied, in which the two subsystems, a two-level system and a single-mode bosonic field, are in contact with either two individual heat baths or a common heat bath. It is found that in the individual heat-bath case, the JC model can only be thermalized when either the two heat baths have the same temperature or the coupling of the JC system to one of the two baths is turned off. In the common heat-bath case, the JC system can be thermalized irrespective of the bath temperature and the system–bath coupling strengths. The thermal entanglement in this system is also studied. A counterintuitive phenomenon of vanishing thermal entanglement in the JC system is found and proved.     

Compact, efficient diode-end-pumped Nd：GdVO4 slab continuous-wave 912-nm laser

A fiber-coupled laser-diode （LD） end-pumped Nd:GdVO₄ slab continuous-wave （CW） 912-nm laser and an LD bar end-pumped Nd:GdVO₄ slab CW 912-nm laser are both demonstrated in this paper.Using the fiber-coupled LD of end-pumped type,a highest CW 912-nm laser output power of 10.17 W is obtained with a high optical-to-optical conversion efficiency of 24.6% and a slope efficiency of 34.5%.The measured M 2 factors of beam quality in x and y directions are 5.3 and 5.1,respectively.Besides,an LD bar of end-pumped type is used to realize CW 912-nm laser output,which has the advantages of compactness and low cost.When the pump power is 38.8 W,the output power is 8.87 W and the measured M 2 factors of beam quality in x and y directions are 16 and 1.31,respectively.In order to improve the beam quality of the 912-nm laser at x direction,a new quasi-concentric laser resonator will be designed,and an LD bar end-pumped Nd:GdVO₄ slab high-power CW 912-nm TEM₀₀ laser will be realized in the future.     

Room temperature continuous wave operation of 1.33-μm InAs/GaAs quantum dot laser with high output power

Continuous wave operation of a semiconductor laser diode based on five stacks of InAs quantum dots (QDs) embedded within strained InGaAs quantum wells as an active region is demonstrated. At room temperature, 355-Mw output power at ground state of 1.33-1.35μm for a 20-μm ridge-waveguide laser without facet coating is achieved. By optimizing the molecular beam epitaxy (MBE) growth conditions,the QD density per layer is raised to 4 × 1010 cm-2. The laser keeps lasing at ground state until the temperature reaches 65 ℃.     

激光诱导Ni等离子体特性的研究

以Nd·YAG激光器的二倍频输出作为激发源,获得了激光诱导Ni等离子体的发射光谱,基于发射光谱,对等离子体电子激发温度和电子密度进行了测量,其典型值分别为3 714 K,4.67×1016 cm-3。测量了等离子体电子激发温度和电子密度的空间分布,发现沿垂直于激光传播方向的径向,随到中心点距离的增加,等离子体辐射的强度减小,但线型和线宽不变,表明等离子体电子激发温度和电子密度沿径向均匀分布。沿激光传播方向,随到样品表面距离的增加,等离子体辐射强度、电子激发温度和电子密度先增加后降低,在距样品表面1.5 mm处,达到最大值。采用激光诱导击穿光谱技术进行相关探测时,收集距离样品表面1.5 mm处的发射谱,有利于提高探测灵敏度。     

第一性原理研究Zr的掺杂对Xe在UO_2中溶解能力的影响

Zr既是反应堆中核燃料组件的包壳材料,也是核燃料UO_2的一种裂变产物,不可避免地会掺杂到UO_2中,对其性质等产生一定的影响.本文通过第一性原理密度泛函理论计算,研究了Zr掺杂所引起的Xe在UO_2中溶解能力的变化.首先应用引入Hubbard U修正的广义梯度近似密度泛函计算了U,O间隙和空位缺陷的形成能,结果与文献值符合,验证了计算方法的可靠性.在此基础上对Zr掺杂后空位缺陷的形成能及Xe吸附到空位缺陷所需的结合能的变化情况进行了研究.结果表明,Zr的掺杂会增加空位缺陷的形成能,减小大部分Xe吸附的结合能,且空位缺陷形成能的变化量普遍更大,从而在整体上增加了Xe在UO_2中的溶解能.说明在UO_2中,Zr掺杂主要是通过增加缺陷的形成难度而减弱了Xe在其中的溶解能力.     

Amorphous Cobalt Coordination Nanolayers Incorporated with Silver Nanowires: A New Electrode Material for Supercapacitors

The 2D amorphous cobalt coordination framework/silver nanowires nanocomposites (A‐CoL/Ag NC) are successfully synthesized by one‐step solution agitation at room temperature. The experimental data reveal that the hybrid provides sufficient contact between active materials and electrolyte, and facilitates the transfer of ions/electrons, resulting in high specific capacitance, high output potential, great rate capacity at high current density, and good cycle stability. As supercapacitor electrode materials, the as‐prepared A‐CoL/Ag NC electrode exhibits a great specific capacitance which can reach up to 1467 mF cm^?2 at 1.0 mA cm^?2, and 1060 mF cm^?2 even at 10.0 mA cm^?2. The A‐CoL/Ag NC// activated carbon asymmetric supercapacitor (AC ASC) displays a maximum energy density (110 W h kg^?1 at 760 W kg^?1) and maximum power density (6410 W kg^?1 at 63 W h kg^?1) in 3.0 m KOH. Moreover, the developed solid‐state A‐CoL/Ag NC//AC ASC has a broad operated potential window within 0–1.6 V, long cycle life (95.2% after cycling 7000 cycles), delivering an energy density of 151 W h kg^?1 (at 790 W kg^?1), and a power density of 7972 W kg^?1 (at 70 W h kg^?1). The well‐synthesized nanocomposite provides a novel way to synthesize prominent electrode materials for supercapacitors.     

硅探测器的数字化脉冲形状甄别

介绍了利用硅探测器的脉冲形状甄别进行粒子鉴别的原理。详细叙述了基于数字化方法的脉冲形状甄别的实现。采样频率和位数是数字化方法的两个重要参数。对于硅探测器信号,采用100 MS/s,12 bit的Digitizer可以满足脉冲形状甄别法对时间分辨的要求。同时对该方法粒子鉴别的特征和能量阈值做了简要的分析和对比。粒子背面入射硅探测器的所得的阈值低于正面入射的情况。例如对于氖周围的同位素,背面入射情况的阈值约为100 MeV,为正面入射情况下鉴别阈值的二分之一,相当与ΔE-E方法中ΔE探测器厚度约为60 μm情况下的阈值。最后定性讨论了硅探测器的电阻率不均匀性和沟道效应对粒子鉴别性能的影响。In this paper Pulse Shape Discrimination(PSD) for silicon detector has been briefly introduced. The emerging digital method successfully applied to detector signal processing makes digital PSD method one of the most promising particle identification methods. Sampling frequency and the number of bits are two key parameters of digital method. For silicon detector signal, adopting 100 Ms/s, 12 bit Digitizer can satisfy the time resolution requirement of PSD method. The identification characteristic and energy threshold of this method have been discussed and compared with both front injection and rear injection cases. Energy threshold with rear injection usually is much lower than that with front injection. For example, around for Neon isotope energy threshold with rear injection is about 100 MeV which is only half of the threshold with front injection, also equivalent to thickness of about 60 μm silicon detector threshold in ΔE-E method. At the end the impact of silicon detector's resistivity nonuniformity and channel effect on the identification capacity of PSD method has been discussed in detail.     

冻干溶液的低温显微研究与热分析

利用低温显微系统研究了叔丁醇水溶液降温时的晶体形态,并利用差示扫描量热法(DSC)研究了溶液的反玻璃化结晶。低温显微实验表明:叔丁醇／水溶液结晶形状、大小与叔丁醇的浓度有关,浓度为10％时形成粗大的针状结晶, 有利于升华速率的提高。DSC实验表明:10％叔丁醇／10％蔗糖／水三元溶液的临界复温速率为250℃／min左右。