6H-SiC衬底片的表面处理

相比于蓝宝石,6H-SiC是制作GaN高功率器件更有前途的衬底.本文研究了表面处理如研磨、化学机械抛光对6H-SiC衬底表面特性的影响.用显微镜、原子力显微镜、拉曼光谱、卢瑟福背散射谱表征了衬底表面.结果表明经过两步化学机械抛光后提高了表面质量.经第二步化学机械抛光后的衬底具有优异的表面形貌、高透射率和极小的损伤层,其表面粗糙度RMS是0.12nm.在该衬底上用MOCVD方法长出了高质量的GaN外延膜.     

一种基于新型小波包阈值的图像去噪方法

提出了一种基于小波包理论去除图像噪声的方法,用小波包把图像分解为高频分量和低频分量,根据高频分量估计噪声的标准差,并利用该标准差以及Birge-Massart惩罚函数计算阈值.鉴于传统软硬阈值的缺陷,采用一种新型阈值量化方法,用三次多项式在硬阈值的基础上插值,使新的阈值函数保持了连续性和可导性.通过这种方法既消除了图像的振铃现象,又保留了细节成分.实验表明：与传统方法相比,新方法使图像视觉效果和峰值信噪比均获得提高.     

关于分布函数极大值位置的讨论

将关于某个变量的连续分布函数进行变数变换,除非新老变数为线性关系,否则变换前后的分布函数的极大值之间的关系一般会不同于新老变数之间的关系。     

温度对铌酸锂电光相位调制特性的影响

利用折射率椭球基本理论对线性电光效应进行了分析,对单轴晶体铌酸锂电光相位调制器的温度特性进行了研究。通过计算机进行数值模拟计算,分析了加电场时光通过LiNbO3电光调制器后出射光的相位变化与温度间的关系,得出在横向和纵向调制中温度对相位改变的影响。研究发现,无论在横向还是在纵向调制下,入射光偏振方向不同但其各自受温度影响的相位变化趋势大体一致,即随着晶体中温度的增加而增大。计算结果表明,LiNbO3电光调制的最佳使用方案为：电场沿x主轴方向施加,入射光偏振方向为感应主轴x’方向,且LiNbO3电光调制器粟用横向相位调制方式。     

增生性疤痕组织与正常上皮组织FTIR光谱研究

通过对40例疤痕组织和正常皮肤组织的ETIR光谱比较分析发现,由于个体差异,其光谱均可分为三种不同类型。此外,疤痕组织中的胶原、蛋白质、核酸和脂类等生物大分子的吸收峰强度均在不同程度上高于正常皮肤组织,但两者的A_(1083)/A_(1548)并无明显差异。提示疤痕组织中的细胞仍属正常生长,治疗中不应损伤。     

β-榄香烯振动光谱的量子化学从头计算

利用G98及GAMESS从头计算程序的RHF／6－31方法,对β－榄香烯的全部振动基频作了计算,并与实测红外光谱做了对比,归属了它们的振动模式,讨论了它们的特征基频,并对理论计算的振动频率进行了标度校正。     

Polystyrene-bound diethanolamine based ionic liquids for chemical fixation of CO2

Polystyrene-bound diethanolamine based ionic liquids (PS-DHEEAB and PS-THEAB) were synthesized and applied for the chemical fixation of CO₂ into cyclic carbonates without any additional co-catalyst and solvent. The effect of the catalysts with different number of hydroxyl group in the cation of the IL on the reaction was systematically investigated. Highest activity and selectivity were achieved in the presence of polystyrene supported diethanolamine ethyl bromide (PS-DHEEAB) in comparison with other catalysts employed. The catalyst was tough in stability and also found to be extended to a variety of terminal epoxides and aziridines. The relationship between high catalytic reactivity and the –OH functional groups was proposed.     

Scope and regioselectivity of the 1,3-dipolar cycloaddition of azides with methyl 2-perfluoroalkynoates for an easy,metal-free route to perfluoroalkylated 1,2,3-triazoles

1,3-Dipolar cycloadditions of methyl 2-perfluoroalkynoates with various azides have been examined, leading to a simple metal-free synthetic protocol for the synthesis of perfluoroalkylated 1,2,3-triazoles. The regiochemical results demonstrated that the cycloaddition was controlled by FMO (the frontier molecular obitals) interaction and steric hindrance in transition states.     

From cluster assembly to ultrathin nanocrystals and complex nanostructures

Ultrathin nanostructures have attracted much attention in recent years due to their predictable novel properties and various potential applications. The improvement in synthetic skills has led to many successful syntheses of nanostructures including zerodimensional (0D) nanoclusters, one-dimensional (1D) nanowires, two-dimensional (2D) nanosheets and other higher-level complex nanostructures, where cluster-assembly of primary nanocrystals is a common process. In this review, progress in ultrathin nanocrystals in the last decade and several important factors in the growth mechanisms are covered. By giving examples of cluster assembly from 1D to 3D nanostructures, the utility of cluster assembly in the synthesis of new materials has been demonstrated.     

高Jc Tl系2223相银包套带材的磁通钉扎和耗散

测量了Ｔｌ系２２２３相银包套超导带（Ｊ_c＝１．５×１０^４Ａ·ｃｍ^-2，７７Ｋ，０Ｔ）在０－０．８Ｔ磁场下电阻转变展宽，实验结果引用热激活磁通蠕动模型加以解释。磁场平行于带面（Ｈ∥ａｂ面）和磁场垂直于带面（Ｈ⊥ａｂ面）两种情况下，激活能与磁场之间满足幂指数关系：Ｕ_0∥＝０．２１ H^-0.3(eV),Ｕ_0⊥＝０．１5 H^-0.4(eV)，其中Ｈ的单位为ｋＧ。 关键词：