高精度光学对准测量装置的设计

设计了一套光学对准测量装置,该装置主要由面阵CCD相机、光学镜头、图像处理模块、LED红光光源、球面反光镜组成。介绍了测量原理,测量目标采用等腰三角形排列,通过面阵CCD对目标所反射的图像进行采集,由图像处理模块对该图像进行实时处理,能够同时得到X、Y、Z以及旋转角度等四维坐标数据。推导了光斑图像坐标和被测平面距离等计算公式,并进行了对准精度分析。结果表明,该装置位置误差〈1mm,角度误差为0．24°,实现了高精度、自动、快速对准测量。     

交叉分子束方法研究H+CH4和H+CD4反应:CH3/CD3的振动激发态产物通道

We study the H+CH₄/CD₄→H₂/HD+CH₃/CD₃ reactions using the time sliced velocity map ion imaging technique. Ion images of the CH₃/CD₃ products were measured by the (2+1) resonance enhanced multi-photon ionization (REMPI) detection method. Besides the CH₃/CD₃ products in the ground state, ion images of the vibrationally excited CH₃/CD₃ products were also observed at two collision energies of 0.72 and 1.06 eV. It is shown that the angular distribution of the products CH₃/CD₃ in vibrationally excited states gradually vary from backward scattering to sideways scattering as the collision energy increases. Compared to the CH₃/CD₃ products in the ground state, the CH₃/CD₃ products in vibrationally excited states tend to be more sideways scattered, indicating that larger impact parameters play a more important role in the vibrationally excited product channels.     

氧化锌纳米棒场发射性能研究

采用简单物理气相沉积法制备出取向和非取向的氧化锌纳米棒，他们的场致电子发射性能测量结果表明，ZnO纳米棒具有较好的场发射性能，但是高度取向的ZnO纳米棒阵列并不利于获得高的场致电子发射电流密度.这可能是由于高密度ZnO纳米棒之间具有较高的屏蔽效应，降低了ZnO纳米棒阵列的场放大因子，从而影响了其场发射性能.相反，非取向ZnO纳米棒由于相互之间的屏蔽效应比较弱，而且表面存在容易成为发射中心的微小突起，表现出较好的场发射效果.这些结果不仅有助于加深我们对准一维纳米材料场致电子发射性能的理解，也为未来场发射电子器件的实际应用提供了可靠的依据. 关键词： 氧化锌 场发射 非取向     

Ni熔体凝固过程中临界晶核和亚临界晶核的分子动力学模拟

本文用分子动力学模拟研究了Ni熔体以不同冷速凝固后微观结构的演变规律, 并通过理论计算确定出了Ni熔体凝固后获得理想非晶的临界条件. 模拟结果发现冷速小于10¹¹ K/s时, Ni 熔体凝固后形成晶态组织; 冷速在10¹¹ K/s到10^14.5 K/s之间时, Ni熔体凝固后形成由晶态结构与非晶态结构组成的混合组织. 冷速小于10¹⁰ K/s, Ni 熔体凝固后形成的晶态组织具有fcc结构; 冷速在10¹⁰ K/s到10^14.5 K/s之间时, Ni熔体凝固后组织中的晶态由fcc和hcp结构层状镶嵌排列构成. 通过分析模拟结果和计算结果, 确定出了Ni熔体凝固后形成理想非晶的临界冷速为10^14.5 K/s. 并发现Ni熔体中临界晶核(冷速等于10^14.5 K/s)和亚临界晶核(冷速大于10^14.5 K/s) 均由fcc和hcp组成层状偏聚结构, 这表明Ni熔体中生长的晶体、临界晶核和晶胚的结构是相同的. 关键词： 分子动力学模拟 晶体团簇 临界冷速 结构     

Study on the electronic structure and optical properties of different Al constituent Ga1−xAlxAs

Using quantum mechanics GASTEP software package based on the first principle density function theory, the electronic structure and optical properties of Ga_1−xAl_xAs at different Al constituent are calculated. Result shows that with the increase of Al constituent, the band gap of Ga_1−xAl_xAs increases and varies from direct band gap to indirect band gap; the absorption band edge and the absorption peak move to high-energy side; the static reflectivity decreases. With the increasing of the incident photon energy, Ga_1−xAl_xAs shows metal reflective properties in certain energy range. With the increasing of Al constituent, static dielectric constant decreases and the intersection of dielectric function and the x-axis move towards high-energy side; the peak of energy loss function move to low-energy side and the peak value reduces.     

同轴引出相对论返波管

 提出一种新型相对论返波管 同轴引出相对论返波管结构。首先,利用KARAT软件对这种结构进行了2.5维全电磁粒子数值模拟,经过参数调整,输出的微波脉冲功率为2.0GW,微波频率为9.28 GHz,转换效率达45%。并在模拟中对电子束与电磁波的作用过程进行了跟踪和分析;然后利用SUPERFISH软件对此结构中的场分布进行了计算,结合PIC模拟结果,初步证明了由于内导体的引入改变了返波管末端的反射,有利于电子束与电磁波的能量交换。     

一维云粒子激光探测仪研制及探测数据分析

阐述基于Mie散射理论和激光技术而研制的云粒子探测仪的相关问题。利用m量级的小孔光阑模拟感应区域的散射光,并对系统的探测敏感区域面积进行测定;通过使用不同直径的标准粒子对系统进行标定,得到可靠的响应曲线,用于定量测量云粒子尺度谱及粒子数密度。在进行了一系列实验室内的实验之后,将仪器装载在飞机上进行穿云飞行测量实验,表明了该仪器在飞行过程中工作正常、稳定,并且能够即时地显示采样区内云粒子尺度谱分布和数浓度;通过分析探测得到的数据,并与云粒子谱分布进行比较,确认了探测数据有效可靠,反映了该仪器具有良好的测云能力。     

光滑粒子动力学方法中粒子分布与数值稳定性分析

光滑粒子动力学(SPH)作为一种拉格朗日型无网格粒子方法,已经成功地应用于包括含多相流动界面以及移动边界的可压缩和不可压缩流体运动的研究中.通过对Poiseuille流动的深入研究,探索了SPH方法中粒子分布对计算精度的影响,揭示了一种因为粒子不规则分布而导致的数值不稳定现象.研究显示,这种数值不稳定性起源于SPH方法粒子近似过程中的不连续性.使用了一种新的粒子近似格式以确保SPH方法中粒子近似的连续性.计算结果表明,这种新的粒子近似格式对于规则和不规则的粒子分布都能得到稳定精度的结果.     

Geometric formulations and variational integrators of discrete autonomous Birkhoff systems

The variational integrators of autonomous Birkhoff systems are obtained by the discrete variational principle. The geometric structure of the discrete autonomous Birkhoff system is formulated. The discretization of mathematical pendulum shows that the discrete variational method is as effective as symplectic scheme for the autonomous Birkhoff systems.     

Two-dimensional particle-in-cell plasma source ion implantation of a prolate spheroid target

A two-dimensional particle-in-cell simulation is used to study the time-dependent evolution of the sheath surrounding a prolate spheroid target during a high voltage pulse in plasma source ion implantation. Our study shows that the potential contour lines pack more closely in the plasma sheath near the vertex of the major axis, i.e. where a thinner sheath is formed, and a non-uniform total ion dose distribution is incident along the surface of the prolate spheroid target due to the focusing of ions by the potential structure. Ion focusing takes place not only at the vertex of the major axis, where dense potential contour lines exist, but also at the vertex of the minor axis, where sparse contour lines exist. This results in two peaks of the received ion dose, locating at the vertices of the major and minor axes of the prolate spheroid target, and an ion dose valley, staying always between the vertices, rather than at the vertex of the minor axis.