配合物形成的三维超分子体系—[Ni(C_6H_4O_2N)_2(H_2O)_4]的水热法合成、晶体结构及热分析

采用水热法用Ni(NO3)26H2O和异烟酸制备出了一种新的由配合物形成的三维超分子体系—[Ni(C6H4O2N)2(H2O)4],并通过X射线衍射对其晶体结构进行了测定。 该晶体属三斜晶系,空间群为Pī, 所得晶胞参数为: a = 6.9228(4), b = 9.6664(19),c = 6.322(1) , a = 96.86(3), b = 113.33(3), g = 110.35(3)°, V = 347.6(1) 3, Z = 1, Mr = 374.98, Dc = 1.791 g/cm3, F(000) = 194, m = 1.443 mm-1。用1362个可观察的 (I > 2s(I))衍射点,修正123个结构参数, 最终偏离因子R = 0.0444,wR = 0.1271。在组成该化合物的基本结构单元[Ni(C6H4O2N)2(H2O)4]中,Ni处于1个稍微拉长的八面体的中心; 各个结构单元之间通过氢键OH…O相互连接,形成了无限伸展的具有层状结构的三维超分子体系。 另外,从差热及热重曲线可以看出,该化合物加热到154 ℃时开始分解, 首先失去4个H2O,再失去2个异烟酸根,最后残余物为NiO。     

2,3,5-三溴-4''''-硝基-4,2''''-双羟基二苯醚的合成及其抑菌活性研究

天然多溴代羟基二苯醚类化合物是存在于海洋海绵体中的一类抑菌活性物质,国内外学者对此类物质进行了大量的研究工作,发现他们具有良好的抑菌性,能有效抑制多种有害菌[1-4]的生长.     

苯丙水溶胶的合成与性能研究(I) 聚合工艺和反应组分对聚合稳定性和胶体性能的影响

用一次投料法、半连续滴加法和单体预乳化法三种聚合工艺，合成了苯丙乳液聚合物，并加氨微细化，转化成水溶胶，考察了聚合工艺和反应组分（乳化剂，功能单体等）对苯丙乳液及其水溶胶反应稳定性和粒子大小及分布等胶体性能的影响。     

具有超大通道结构的介孔氧化硅柱层状钛酸的合成和催化应用初探

A mesoporous (d=2.3mm) silica-pillared layered tetratitanate with a super gallery (d₀₀₁=1.84mm)was prepared by first preswelling layered tetratitanate with n-dodecyl amine, then reacting with 20wt% NH₂(CH₂)₃Si(OC₂H₅)₃ aqueous solution, and finally calcinating the resultant solid product in air at 550℃. All the reaction was carried out hydrothermally in an autoclave at 130℃. The obtained material has a relatively high BET surface area of 204m²·g^-1 and a thermal stability beyond 600℃. The catalytic application of the material was also investigated by using the dehydration of isopropanol and the reform of n-hexane as two probing reactions.     

Chemoenzymatic Synthesis of Cellular Adhesion Tripeptide RGD Precursor in Organic Media

IntroductionA characteristic tripeptide sequence Arg-Gly-Asp(RGD) that is found within fibronectin and other rela-ted adhesion molecules in extracellular matrices(ECM)has received considerable attention from researcherssince it was proved to be a recognit…     

Photovoltaic Characteristics of a Naphthylamine Derivative

Organic photovoltaic （OPV） cells were fabricated via vacuum vapor deposition with {4-[2-（3-di-cyanomethylidene-5,5-dimethylcyclohexenyl）vinyl]phenyl}di（1-naphthyl）amine （DNP-2CN） as the electron donor, and fullerene （C60） as the electron acceptor. A thin film （10 nm） of tris（8-quinolinolato）aluminum （Alq3） was adopted as the buffer layer. A device based on this DNP-2CN exhibited an open circuit voltage （Voc） of 370 mV, a short-circuit current density （Jsc） of 0.61 mAocm 2, and a white-light power conversion efficiency （ η） of 0.09% （AM1.5, 75 mW.cm^- 2）.     

醋酸乙烯酯-马来酸酐共聚物与水解聚丙烯酰胺高分子络合物的研究

<正> 某些高分子在溶液中可以通过次价力形成高分子络合物.根据次价力的不同,可分为四类:聚电解质络合物、氢键络合物、立体络合物和电荷转移络合物.部分水解聚丙烯酰胺(简称HPAM)是在水悬浮体中被广泛使用的絮凝剂,醋酸乙烯酯-马来酸酐共聚物(简称VAMA)是一种能力很强的泥浆稀释剂.研究二者在水溶液中的相互作用,在理论上和应用上都有重要意义.我们曾研究了粘土对它们的吸附作用、改变泥浆流变性以     

含聚醚间隔链的扩链脲改性环氧树脂/双氰双胺固化体系性能研究

合成了一系列含不同分子量聚环氧丙烷 (PPG)柔性间隔链的扩链脲 ,系统考察了扩链脲改性环氧树脂E 5 1/双氰双胺 (dicy)固化体系的固化反应活性、动态力学行为、冲击性能和断裂面形态结构 ,并对体系的冲击性能、形态结构与动态力学行为之间的关系进行了探讨 .结果表明 ,改性体系固化反应活性明显提高 ,固化反应表观活化能降低 ,固化反应峰顶温度从 190℃降低至 14 0℃ ,固化反应的表观活化能由 14 5 5kJ/mol降至 70～ 80kJ mol;改性体系冲击强度明显提高 ,其中所含PPG柔性链分子量为 10 0 0的扩链脲改性的E 5 1/dicy体系冲击强度较未改性的E 5 1/dicy体系提高了 8倍 ,其冲击试样断裂面的形态具有明显的韧性断裂特征 ,微观两相网络结构的存在导致了改性体系冲击强度显著提高     

Flow-injection spectrofluorometric determination of trace amounts of formaldehyde in water after derivatization with acetoacetanilide

A novel fluorophotometric method for formaldehyde determination in environmental waters was developed: the method does not require any enrichment procedures. A flow-injection analysis method for the spectrofluorometric determination of formaldehyde in waters, which is based on the reaction of formaldehyde with acetoacetanilide and ammonia, is proposed. The proposed method shows a good linearity from 0.50 to 40 × 10⁻⁷ M, and the limit of detection (LOD) of 3 × 10⁻⁹ M (0.09 ppb) is achievable. The sample throughput is 15 h⁻¹. One of the main advantages in the proposed method is that the reaction can be carried out at room temperature without any heating system. The effect of various interferences possibly present in the real water samples was investigated. Most cations and anions, as well as organic compounds, do not interfere with the determination of formaldehyde in environmental water samples. The proposed method is very simple, rapid, less expensive, and highly sensitive, and can be applied to the environmental water samples, such as rain, tap water and river water, at low concentration levels without any enrichment procedure.     

改性浇铸尼龙的研究进展

立足于浇铸尼龙的反应机理,结合对其在实际应用中的改性要求,阐述了改性浇铸尼龙的研究进展.尤其以聚合物改性浇铸尼龙为重点,从改性的机理和相形态等方面详细地介绍了其的研究情况,总结了最新的工作以及将来的发展方向,为尼龙材料的更加广泛应用提供一定的参考.