A hybrid-Trefftz element containing an elliptic hole

Much work on special elements that simplify geometrical modelling of structures containing holes, cracks and/ or inclusions has been reported extensively in the literature. This paper presents a hybrid-Trefftz element containing elliptic hole formulated using Hellinger–Reissner principle by employing trial functions based on the mapping technique and the Cauchy integral method. The element presented in this paper could be regarded as an improved formulation over Piltner [Special finite elements with holes and internal cracks, Int. J. Numer. Methods Eng. 21 (1985) 1471–1485] element because the chosen trail functions in this paper have provided relatively more stable solutions. The use of the element with other ordinary displacement-based finite elements has also yielded very accurate solutions even when very coarse meshes relative to the size of the elliptic hole have been used.     

Phase-Locked Fibre Array for Coherent Combination and Atmosphere Aberration Compensation

We report a fibre amplifier array that not only achieves coherent beam combination by compensation of phase noises of fibre amplifier, but also accomplishes correction of atmosphere aberration. It is of master-oscillatormultiple-amplifier （MOPA） configuration, which can be phase-locked by the multidither principle or heterodyne detection principle. First laboratory experiments of atmosphere aberration compensation of a three-element fibre amplifier array are reported. The atmosphere aberration is created by a phase screen in the experiment. The phase changes of the beam, which are introduced by the fibre amplifier and the phase screen, are both detected by the heterodyne detection method. Phase modulators are controlled to compensate for the phase in the three paths. No matter whether there is a phase screen producing atmosphere aberration or not, the dim dynamic interference fringes in the far field turn to a clear and stable pattern, and the peak intensity is maximized. It is indicated that the fibre amplifier array is phase-locked, and coherent combination of the three beams is achieved. It can be used not only to obtain high power fibre laser array but also in laser space communication.     

Eucaglobulin, A New Complex of Gallotannin and Monoterpene from Eucalyptus globulus

EucalyPtusgl0bulusLabill.(Myrtaceae)isakindofmedicinalplantwidelydistributedintheYunnanpr0vinceofChina.ItSleaves,rootSandffoitShavebeenusedastraditionalremediesforthetreatmentofinfluenza,dysentery,enteritis,rheumatalgiaandbleeding.BesidesvolatileterpenoidconstituentSintheessential0iloftheleavesandfruits,theoccurrenceofanumber0fphloroglucinol-sesquiterpene-or-m0n0terpene-c0upledcomPoundsnamedmacrocarpals'andeugl0bals'intheleavesandbudshasbeenrepofted.Inordertostudythechendcalandbioactivecon…     

牛血清白蛋白的压电免疫测定及电极的洗脱

在镀银石英晶片上用压电免疫方法测定了０．５～５０ｍｇ／Ｌ范围内的牛血清白蛋白的浓度，得到线性响应；并较全面地研究了压电晶片的回复性使用问题，以０．２ｍｏｌ／Ｌ甘氨酸－盐酸（ｐＨ＝２．０）溶液洗脱时效果较好     

乙酰化气相色谱法快速测定皮革及皮革制品中的五氯苯酚残留量

在前人工作基础上，对皮革及皮革制品中五氯苯酚残留测定方法经试验改进，增加浓硫酸净化步骤，并以艾氏剂作为标物，乙酰五氯苯酚用填充气相色谱测定。     

7-氮杂-3,6-二氧杂-二环[3.3.0]辛-2-酮类化合物合成的新方法

5-甲氧基-2-（5H）-呋喃酮与氮酸硅烷基酯通过1，3-偶极环加成反应可以为7-氮杂-4-甲氧基-3，6-二氧杂-二环[3.3.0]辛-2-酮类化合物提供新的合成途径。通过元素分析、IR、^1HNMR、^13CNMR、MS等波谱分析进行了结构表征。     

Re_2(edt)_4的电子结构和电子吸收光谱的从头算研究

用密度泛函理论中的B3LYP/CEP-4G方法对Re2（edt）4进行了结构优化和自然键轨道计算,并用单电子激发组态相互作用方法（CIS）计算了Re2（edt）4的分子轨道和激发态。结果表明Re-Re之间不存在明显的三重键,进而很好地解释了Re2（edt）4分子的电子吸收光谱。     

具有六重穿插非中心对称金刚石网络结构的Cd(Ⅱ)和Zn(Ⅱ)的配位高聚物(英)

利用1，4-二-(4-羧基吡啶基)丁烷(L)合成了两个新的三维配位聚合物{(CdL₂)·4H₂O·2ClO₄}_n 1和{(ZnL₂)·4H₂O·2ClO₄}_n 2。单晶X-射线结构分析表明，1和2具有相同的计量式，但其晶体属于不同的空间群(1属于P4n2，2属于P4₂22)。两种配合物中，每个金属离子分别由配体与四个相邻的金属离子连接，从而形成具有六重穿插的金刚石网络结构，其网络中大的空腔被高氯酸根离子和(H₂O)₄分子簇所占据。     

STUDY ON LONG CHAIN BRANCHING IN POLYBUTADIENES BY GPC COUPLED WITH CAPILLARY VISCOMETER

The long chain branching of polybutadienes (PB) was measured with gel permeation chroma-tography coupled to an automatically recording capillary viscometer. In this method the experimentalrelation [η] (V) was translated into the calibration curve [η] (V_R) for the monodisperse species. The curve is combined with the universal calibration so that the molecular weight distributionand an additional parameter, e.g. the average branching factor of this samples may be obtained. Longchain branching molecular weight changes with polyemerization conditions.     

甲酰胺对有序介孔二氧化硅形貌的影响

At room temperature and in acidic solution, ordered mesoporous silicas with particular morphology were synthesized using cetylpyridinium chloride as the template and formamide as the cosolvent. Scanning electron microscope (SEM), small angle X-ray diffraction (SXRD), and nitrogen adsorption techniques were used to characterize the as-synthesized and calcined samples. Results showed that the samples had hexagonal mesostructure analogous to MCM-41 and relatively narrow pore-size distributions (BJH). Besides, BET surface areas of the samples were in the range of 1 000～1 250 m²·g^-1 and high total pore volumes were up to 1.367 cm³·g^-1. Addition of formamide affected obviously mesostructures and the morphology of the mesoporous silica. Furthermore, with the increase of the concentration of formamide, the unit-cell constant decreased and particle shape changed from gyroids to fibers.