钇对Ti-1100高温钛合金热稳定性和蠕变行为的影响

量了Ｔｉ１１００和Ｔｉ１１００／０１％Ｙ（质量分数）高温钛合金在６００℃／１００ｈ空气中暴露后的拉伸性能及在６００℃／１５０ＭＰａ／１００ｈ条件下的蠕变性能，利用透射电镜观察了合金室温及蠕变后的组织。结果表明，Ｔｉ１１００合金加入０１％的Ｙ后，由于原始β晶粒得到细化，明显改善了其热稳定性；固溶在基体中的硅原子阻碍位错滑移和攀移，使蠕变中的回复过程难于实现；稀土还抑制α２相的长大，所形成的氧化物也阻碍位错的运动。这些均有利于提高Ｔｉ１１００合金的抗蠕变性能。     

锰（Ⅱ）—邻菲口罗啉配合物极谱吸附波及其应用

在ｐＨ９．５ＮＨ３ＮＨ４Ｃｌ缓冲溶液中，Ｍｎ（Ⅱ）与邻菲口罗啉形成的配合物在－１．３６Ｖ（ｖｓ．ＳＣＥ）处产生一灵敏的吸附波，一阶导数峰电流与Ｍｎ（Ⅱ）浓度在５×１０－８５×１０－６ｍｏｌ／Ｌ范围内呈线性关系，检出限为２×１０－８ｍｏｌ／Ｌ对极谱性质及反应机理进行了研究，用该法测定了大豆和茶叶中的微量锰，结果满意     

Two New ent-Kaurane Diterpenoids from Isodon xerophilus

In continuation of our research on diterpenoids in the Isodon species, several newcompounds"' were obtained from the leaves oflsodon xerophilus (C. Y. Wu et H. W. Li)H. Hara (Labiatae), a perennial shrub native to Yunnan province. Further fractionation ofthe EtOAc extract led to the isolation of tWo new enl-kauranoids, xerophilusin E (l) andxerophilusin F (2). This paper deals with the structUral elucidation of the newcompounds.Xerophilusin E (l), a minor constitUent, was obtained as p…     

The Mechanism on Cyclization, Debenzylation and Oxidation of 1-[1-（Benzyloxy）-3-methylnaphthalen-4-yloxy]propan-2-one

Mansonone compounds represent a series of naturally occurring o-quinones mainly isolated from the heartwood of Mansonia Altissima1 and Ulmus Glabra2. Mansonone F contained oxaphenalene skeleton which was a relatively novel structure and rarely existed in …     

Comparison of Py*+/dU*- charge transfer state dynamics in 5-(1-pyrenyl)-2'-deoxyuridine nucleoside conjugates with amido-, ethylenyl-, and ethynyl linkers

Femtosecond, picosecond, and nanosecond transient absorbance (TA) and picosecond emission kinetics results are presented for three 5-(1-pyrenyl)-2'-deoxyuridine nucleosides each with a different two-atom linker joining pyrenyl C-1 to uracil C-5. The linkers are respectively -NHCO-, -(CH(2))(2)-, and -C[triple bond]C- for PAdU, PEdU, and PYdU. For all three nucleoside conjugates, most conformers undergo intramolecular charge transfer (CT) from their pyrenyl (1)(pi,pi) excited states to form Py(*+)/dU(*-) CT products in ultrashort times: 相似文献   

丁二烯阴离子聚合动力学及活性种的研究

本文对于n-BuLi/2G引发的丁二烯阴离子聚合动力学数据及产物微观结构进行了解析。建立了动力学模型,提出了聚合反应机理。求得了单量体、一络合体和二络合体的增长速度常数和诸活性种之间的平衡常数以及它们对形成乙烯基结构的贡献。     

新型树状大分子核醚-四硅烷的合成

以季戊四醇为原料合成了一种新型树状大分子核--醚-四硅烷,可用于树状大分子构筑.通过季戊四醇(1)与溴丙烯的醚化反应得到四烯丙基醚2,然后在Pt催化作用下,2与硅氯仿通过硅氢化反应生成醚-四(三氯硅烷) 3(可直接与多种官能团反应生成树状大分子),3经过LiAlH4还原后得到目标产物醚-四硅烷4.通过IR, 1H NMR, 13C NMR对中间体和目标产物的结构进行了表征,并对产物的结构进行了讨论和确认.     

SYNTHESIS AND MESOMORPHIC PROPERTIES OF FISHBONE-LIKE LIQUID CRYSTALLINE POLYSILSESQUIOXANES——Ⅰ. FISHBONE-LIKE, β-DIKETONE-BASED LIQUID CRYSTALLINE POLYSILSESQUIOXANES AND THEIR COPPER COMPLEXES*

Two kinds of fishbone-like, β-diketone-based liquid crystalline polysilsesquioxanes(FBDKLCP'S), homopolymeric (H-FBDKLCP) and copolymeric (C-FBDKaLCP) have been first synthesized via the hydrosilylation reaction of a vinyl-terminated β-diketone with the homopolymeric ladderlike polyhydrosilsesquioxane (LPHSQ) and random copolymethylhydrosilsesquioxane (LRPMHSQ) respectively. These new kinds of FBDKLCP with M of 10~4 is thermotroic liquid crystalline polymer and its clearing temperatures T_i's and mesophase range △T's are much higher than those of the corresponding comb-like β-diketone liquid crystalline polysiloxane (DKLCP) by about 200℃. Similar results have been observed with the comparison of the two different structure Cu-coordinating compounds The significant increases in T_((?))'s and △T's of the FBDKLCP and Cu-FBDKLCP are mainly attributed to the great rigidity of the ladderlike polysilsesquioxane backbone.     

流变学法研究部分水解聚丙烯酰胺/Cr(III)交联反应I.浓度的影响

采用流变学法系统地考察了部分水解聚丙烯酰胺（HPAM）/Cr(III)交联体系的 反应动力学。HPAM溶液的粘性模量G”大于弹性模量G’,且其数值随时间不发生变 化,体系为粘性溶液。而HPAM/Cr(III)体系的G’和G”的数值都随时间变化,G” 在反应开始阶段大于G’,当反应进行一段时间后,G’超过G”占据主要地位,体 系成为弹性体系。交联过程可分为三个阶段：第一上升阶段,平缓上升阶段和第二 上升阶段。利用G’～ t曲线可以推测反应机理。实验发现成胶速率随反应物HPAM 和Cr(III)的浓度的增加而增加,而成胶时间缩短。在羧基浓度过量的情况下,交 联反应对Cr(III)浓度的反应级数是1。凝胶的有效弹性交联密度随聚合物浓度的增 加而增,且随凝胶反应的进行而增加。凝胶的交联点间的平均分子量随Cr(III)浓 度的增加和交联反应的进行而下降。     

半化学法制备Pb(Fe2/3W1/3)O3陶瓷粉体的反应机理

铅系弛豫铁电陶瓷钨铁酸铅Pb(Fe2/3W1/3)O3(PFW)是一种重要的介电材料,具有较大的介电常数(8000)和较低的烧结温度(小于900℃),适用于制备低烧高介的多层陶瓷电容器犤1～4犦。在传统氧化物法合成PFW的过程中,易生成恶化介电性能的钨酸铅(PbWO4或Pb2WO5)或焦绿石相(Pb2FeWO6)等其他相犤3,4犦。尽管通过加入过量5%的Fe2O3可以消除这些其他相,但因含较多的变价铁离子(Fe3+和Fe2+)而产生介电老化的缺点犤5犦。虽然二次合成法被广泛用于制备铅系弛豫铁电陶瓷犤6犦,但对制备PFW陶瓷的效果并不明显,仍有少量的钨酸铅PbWO4存在,并且预烧…