Some symmetry-induced isotope effects in the kinetics of recombination reactions

Symmetry-induced isotope effects in recombination and collision-induced dissociation reactions are discussed. Progress on understanding the anomalous isotope effects in ozone is reviewed. Then, calculations are performed for the simpler reaction xNe+yNe+H<-->xNeyNe+H, where x and y label either identical or different isotopes. The atomic masses in the model are chosen so that symmetry is the only difference between the systems. Starting from a single potential energy surface, the properties of the bound, quasibound, and continuum states of the neon dimer are calculated. Then, the vibration rotation infinite order sudden approximation is used to calculate cross sections for all possible inelastic and dissociative processes. A rate constant matrix that exactly satisfies detailed balance is constructed. It allows recombination to occur both via direct three-body collisions and via tunneling into the quasibound states of the energy transfer mechanism. The eigenvalue rate coefficients are determined. Significant isotope effects are clearly found, and their behavior depends on the pressure, temperature, and mechanism of the reaction. Both spin statistics and symmetry breaking produce isotope effects. Under most conditions the breaking of symmetry enhances the rates, but a wide spectrum of effects is observed; they range from isotope effects with a normal mass dependence to huge, mass-independent isotope effects to cancellation and even to reversal of the isotope effects. This is the first calculation of symmetry-induced isotope effects in recombination rates from first principles. The relevance of the present effects to ozone recombination is discussed.     

Shift to Pseudomonic acid B production in P. fluorescens NCIMB10586 by mutation of mupirocin tailoring genes mupO, mupU, mupV, and macpE

Mupirocin, a polyketide-derived antibiotic from Pseudomonas fluorescens NCIMB10586, is a mixture of pseudomonic acids (PA) that target isoleucyl-tRNA synthase. The mup gene cluster encodes both type I polyketide synthases and monofunctional enzymes that should play a role during the conversion of the product of the polyketide synthase into the active antibiotic (tailoring). By in-frame deletion analysis of selected tailoring open-reading frames we show that mupQ, mupS, mupT, and mupW are essential for mupirocin production, whereas mupO, mupU, mupV, and macpE are essential for production of PA-A but not PA-B. Therefore, PA-B is not simply produced by hydroxylation of PA-A but is either a precursor of PA-A or a shunt product. In the mupW mutant, a new metabolite lacking the tetrahydropyran ring is produced, implicating mupW in oxidation of the 16-methyl group.     

EVIDENCE AGAINST THE PRODUCTION OF SUPEROXIDE BY PHOTOIRRADIATION OF HEMATOPORPHYRIN DERIVATIVE

Abstract Experiments were performed to ascertain whether superoxide anion (O₂⁻) was produced by the photodynamic activation of hematoporphyrin derivative (HPD). Three different systems were utilized to detect formation of O₂⁻, oxidation of epinephrine to adrenochrome, reduction of cytochrome c and reduction of nitro blue tetrazolium (NBT). The effects on these detectors under identical conditions for HPD + h ν were compared to those obtained with two O₂⁻ generating systems, riboflavin + by and xanthine-xanthine oxidase, and to a singlet oxygen generating system, photoradiation of methylene blue. The results indicated that HPD + hv differed from the two O₂⁻ generating systems in failing to reduce cytochrome c or NET, and that HPD + h ν was similar to the behavior of methylene blue + h ν . In addition, HPD + h ν but not the O₂⁻ generating systems could inhibit mitochondrial cytochrome c oxidase activity. We conclude that the photodynamic activation of HPD does not produce O₂⁻ as a major oxygen radical and that the effects of HPD + h ν on mitochondrial cytochrome c oxidase are not caused by O₂⁻.     

Kinetics and mechanism of the grafting of 2-(dimethylamino)ethyl methacrylate onto hydrocarbon substrates

The kinetics of grafting a basic monomer, 2-(dimethylamino)-ethyl methacrylate (DMAEMA) to hydrocarbon substrates have been investigated. These systems were chosen as models for the grafting of a homopolymerizable monomer to polyolefins such as polyethylene. The reactions with squalane and n-eicosane were initiated by an organic peroxide, 2,5-dimethyl 2,5 dit-butylperoxy)-3-hexyne; grafting yields become significant at high reaction temperatures and low monomer concentrations. In squalane, the order of reaction with respect to monomer increased from about 1.1 for 0.22?0.44M DMAEMA to almost 2 at 0.69M DMAEMA; the order with respect to initiator was 0.56. The overall activation energy in the 130?160°C temperature range was, however, surprisingly low, 42±5 kJ mol^?1. When analytical data were used to separate the overall rate into those for grafting and homopolymerization, different kinetic paths were observed for the competing reactions. These results are interpreted in terms of two different mechanisms; intramolecular chain transfer plays an important role in grafting, while depropagation becomes a major factor in homopolymerization at temperatures above 150°C. © 1995 John Wiley & Sons, Inc.     

Estimation of urinary diamines and polyamines by thin-layer chromatography

The dansylated derivatives of ammonia, 1.3-diaminopropane, 1,4-diaminobutane, 1,5-diaminopentane, spermidine, histamine, and spermine were separated by one ascending development in chloroform—triethylamine (5:1) on a 250-μm silica gel 60 plate. Putrescine, cadaverine, spermidine, and spermine in human urine were quantitated by a direct scan of the fluorescent intensity of the spots corresponding to these compounds. Higher amounts of spermidine and spermine were found in the urines of cancer patients compared to the values of these substances in normal urine.     

EFFICACY OF PHOTODYNAMIC THERAPY ON ORIGINAL AND RECURRENT RAT MAMMARY TUMORS

Abstract— Photodynamic therapy has demonstrated efficacy toward primary, metastatic and recurrent human tumors. Here, we investigated the ability of photodynamic therapy, using Photofrin, to inhibit growth of R3230AC mammary adenocarcinomas when tumors were treated as original implants and again as lesions recurring at the initial treatment site. The results demonstrate that both initial implants and lesions recurring after the first photodynamic treatment respond similarly to the same photodynamic therapy protocol, with mean tumor volume doubling times of ˜ 11 days in both cases. Cells cultured from original tumor implants or tumors that recurred after photodynamic treatment accumulate equivalent amounts of [¹⁴C]polyhematoporphyrin. Single cell suspensions prepared from either original or recurrent tumors from animals administered 5 mg/kg Photofrin and exposed to light in vitro displayed comparable phototoxicity. Additionally, examination of tumors by light microscopy revealed no morphological differences between the original tumor implants and the recurrent lesions. Taken together, these data indicate that lesions which recurred at the site of the initial photodynamic treatment were not resistant to a second identical course of photodynamic therapy.     

Primary amido substituted diborane4 compounds and imidodiborate4 anions

Treatment of the diborane(4) compound B(2)(NMe(2))(4) with aniline or 2,6-dimethylaniline results in the primary amido compounds B(2)(NHR)(4)(R = Ph, 2,6-Me(2)C(6)H(3)); subsequent treatment with n-BuLi in toluene in each case affords the first examples of anionic imidodiborates namely Li(4)(thf)(6)B(2)(NPh)(4) and Li(4)(thf)(4)B(2)(N-2,6-Me(2)C(6)H(3))(4); all complexes have been characterised crystallographically.     

Grafting of maleic anhydride to hydrocarbons below the ceiling temperature

Maleic anhydride has been grafted to eicosane and squalane at 60–80°C using 1,2-dichlorobenzene as solvent and benzoyl peroxide as initiator. These hydrocarbons are low molecular weight models for hydrocarbon polymers containing secondary and tertiary hydrogen atoms. In the absence of the hydrocarbon and with monomer concentrations of the order of 1M, low molecular weight poly(maleic anhydride) is formed. On addition of the hydrocarbon, the main product is grafted material and very little homopolymer is formed. The grafts consist primarily of single succinic anhydride units but some of them are short poly(maleic anhydride) chains. Ceiling temperature considerations control the formation of homopolymer in the absence of hydrocarbon substrate. In the presence of eicosane or squalane, initiation of grafting proceeds by hydrogen abstraction from the hydrocarbon. The main factor controlling graft length is then the ratio of the rates of intramolecular hydrogen abstraction and of monomer addition to succinic anhydride radicals © 1995 John Wiley & Sons, Inc.     

A simple and versatile method for the synthesis of acetals from aldehydes and ketones using bismuth triflate

Acetals are obtained in good yields by treatment of aldehydes and ketones with trialkyl orthoformate and the corresponding alcohol in the presence of 0.1 mol % Bi(OTf)3.4H2O. A simple procedure for the formation of acetals of diaryl ketones has also been developed. The conversion of carbonyl compounds to the corresponding 1,3-dioxolane using ethylene glycol is also catalyzed by Bi(OTf)3.4H2O (1 mol %). Two methods, both of which avoid the use of benzene, have been developed.     

Generic serial and parallel on-line direct-injection using turbulent flow liquid chromatography/tandem mass spectrometry

The development of turbulent flow chromatography (TFC) has enabled considerable growth in the utility of on-line direct-injection technologies. TFC has now become established in a large number of varied analytical environments, particularly drug discovery/pharmacokinetics, metabolite profiling, combinatorial library purification, pre-clinical and clinical GLP applications. The utility of turbulent flow technology for in-house pre-clinical and clinical quantitative applications has necessitated extensive valve-cleaning procedures, and consequently lengthy cycle-times, to effectively remove the system carry-over. In-house requirements for assay validation require carry-over less than 20% of the lowest level of quantification (LLOQ), corresponding to 0.02% carry-over for a linear calibration range incorporating 3 orders. A generic turbulent flow chromatography protocol has been developed for drug discovery that incorporates polymeric turbulent flow extraction (cyclone) with C18-based reverse-phase chromatography. Further, multiple wash steps are incorporated within the methodology to meet in-house requirements for carry-over. Selection of novel switching-valve materials based on polyarylethyl ketone (PAEK) and Hastelloy/Valcon E autosampler injection hardware has enabled us to significantly impact the cycle-time required to reduce carry-over. Consequently, optimal usage of switching valves has enabled parallel operation for a generic on-line direct-injection methodology to successfully reduce the total cycle-time. Overall reductions from 4 min per sample to 90 s per sample are shown with comparable data quality using a proprietary target molecule from 0.1-100 ng/mL. This paper describes the hardware configuration and methodologies utilized to perform generic serial and parallel on-line direct-injection using a Turboflow HTLC 2300 system.