Diffusion from sessile droplets through membranes

We analyze diffusion from a periodic array of hemispherical droplets through a membrane. We find that the multiple sources do not interact strongly, even when the droplets are closely spaced, so that the flux through the membrane appears nearly additive.     

2,7-二氯荧光素与蛋白质相互作用的分光光度法研究

首次采用分光光度法研究了模拟生理条件(pH 7.4 Tris-HCl缓冲溶液,离子强度I=0.1)下2,7-二氯荧光素与牛血清白蛋白(BSA)相互作用的情况.研究结果表明:两者相互作用形成稳定的复合物,最大吸收波长为509nm,与2,7-二氯荧光素的最大吸收波长502nm比较,红移了7nm;两者之间主要通过静电引力结合,但并不排除疏水作用力和氢键;两者之间的结合数为32.     

Eye tissue structure and refraction alterations upon nondestructive laser action

A new approach to alterations in eye refraction upon nondestructive laser action on the sclera and cornea is studied. It is demonstrated in in vivo experiments on rabbit eyes that sequential laser irradiation of the sclera and cornea yields a significant alteration in the eye refraction. The collagen structure of the sclera and cornea is studied after the nondestructive laser action with noninvasive polarization-sensitive optical coherence tomography. It is demonstrated that collagen fibers that provide for the cornea tension and applanation partially survive in the zone of the local denaturation of sclera. An irradiation mode that corresponds to an increase in the cornea’s plasticity and does not cause visible structural changes is chosen. The simplest theoretical model for alterations in the eye refraction upon the nonablative laser action on sclera is analyzed. The alteration in the cornea curvature upon stretching resulting from the local sclera coagulation and the corresponding decrease in its volume is calculated. The model makes it possible to approximately estimate the laser irradiation modes that provide the desired alterations in eye refraction.     

Polarization imaging for 3D inspection of highly reflective metallic objects

In the field of industrial vision, the 3D inspection of highly reflective metallic objects is still a delicate task. The specular reflections prevent the use of a 3D laser scanner, whereas the phase shifting-based 3D systems are more adapted to inspect surfaces with low curvature. This paper deals with a new automated 3D inspection system based on polarization analysis. Studying the state of polarization of the reflected light is very useful for obtaining information on the normals of the surface. An extension of the shape from polarization method from dielectric to metallic surfaces is demonstrated. Then, an improved relaxation algorithm is provided in order to reconstruct the shape from the normal field given by the polarization analysis. Finally, applications to shape defect detection are discussed and the efficiency of the system in discriminating defects on highly reflective metallic objects made by stamping and polishing is presented. The text was submitted by the authors in English.     

Model of separate sample spectra of coherent-echo signals based on Irkutsk incoherent-scatter radar data

We propose a model of coherent-echo signals during the monostatic sounding of the ionosphere. The model is based on the previously obtained radar equation for separate samples of the scattered signal. The dielectric-permittivity perturbation described by a discrete set of spatial harmonics modulated in space and time is used as the scattering irregularities. The model was tested using Irkutsk incoherent-scatter radar data obtained during the coherent-echo observations in July 15 and 16, 2000. The test shows that the model is suitable for describing the observed characteristics of separate sample spectra of the coherent-echo signals. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 49, No. 6, pp. 459–477, June 2006.     

Structural and electronic properties of graphite layers grown on SiC(0 0 0 1)

Photoelectron spectroscopy, low-energy electron diffraction, and scanning probe microscopy were used to investigate the electronic and structural properties of graphite layers grown by solid state graphitization of SiC(0 0 0 1) surfaces. The process leads to well-ordered graphite layers which are rotated against the substrate lattice by 30°. On on-axis 6H-SiC(0 0 0 1) substrates we observe graphitic layers with up to several 100 nm wide terraces. ARUPS spectra of the graphite layers grown on on-axis 6H-SiC(0 0 0 1) surfaces are indicative of a well-developed band structure. For the graphite/n-type 6H-SiC(0 0 0 1) layer system we observe a Schottky barrier height of ?_B,n = 0.3 ± 0.1 eV. ARUPS spectra of graphite layers grown on 8° off-axis oriented 4H-SiC(0 0 0 1) show unique replicas which are explained by a carpet-like growth mode combined with a step bunching of the substrate.     

Transverse effects under four-wave coupling in the nonlinear Fabry-Perot interferometer

Optics and Spectroscopy - Specific features of the light-beam transverse structure transformation in the process of four-wave coupling in the Fabry-Perot interferometer with a resonant nonlinearity...     

超细CaO粉炉内喷射脱硫的实验研究

本文对超细ＣａＯ粉炉内喷射脱硫进行了实验研究，分析了可能影响超细ＣａＯ粉炉内脱硫效率的多种因素，实验结果表明：使用预先锻烧生成的超细ＣａＯ粉在并不苛刻的反应条件下脱硫效果很好，颗粒大小、反应区温度、反应时间和Ｃａ／Ｓ比对炉内喷钙脱硫的效率有重要的影响．     

Computer simulation of selective absorption of radiation by the components of a light-scattering layer

A method of calculating the partial characteristics of radiation absorption by the components of light-scattering disperse layers is proposed. This method is based on statistical modeling (the Monte Carlo method). The absorptivities of photographic gelatin and silver bromide microcrystals and the corresponding distributions of the absorbed energy over the layer thickness are calculated using the example of an interaction between actinic radiation and silver halide photographic layers in the wavelength range λ=200–440 nm. The following structural parameters of the photographic layer are used in the calculation: the mean size of emulsion crystals d=0.5 μm; the polydispersity C _V =25%; the volume concentrations C _V =10, 20, and 30%; and the thickness of the emulsion layer H=10 μm.