Triterpene glycosides of Acanthophyllum gypsophiloides IV. The structure of acanthophyllosides B and C

Summary Alternative structures for the acyloside chain of acanthophylloside B and C have been established.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Uzbek SSR. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 728–734, November–December, 1975.     

卟啉作为信号传递介质的紫外可见光谱研究

合成了6种氨基酸水杨醛席夫碱(Sal-AA)：Sal-Gly(甘氨酸)、Sal-Phe(苯丙氨酸)、Sal-Arg(精氨酸)、Sal-Tyr(酪氨酸)、Sal-Met(甲硫氨酸)、Sal-Glu(谷氨酸)及其金属铜配合物。并分别在2种不同介质(三氯甲烷和甲醇)中，与四苯基卟啉TPP进行反应，研究了其紫外可见光谱性质，讨论了卟啉作为人工信号转导体系的传递介质，与氨基酸水杨醛席夫碱铜配合物的反应中，实现信号分子铜离子进一步传递的可能性以及溶剂对该信号传递的影响。结果表明，在三氯甲烷为溶剂时，除了Sal-Met的铜配合物之外，其余均能被TPP夺取而形成Metal TPP。而在以甲醇为溶剂时，只有Sal-Gly的铜配合物能被TPP所夺取。     

牛血清白蛋白在NVP/HEMA无规共聚物水凝胶上的吸附研究

合成了不同含水量的N-乙烯吡咯烷酮(NVP)／甲基丙烯酸-β-羟乙酯(HEMA)共聚物水凝胶．研究了温度、pH值，蛋白质初浓度及离子强度等因素对牛血清白蛋白吸附性能的影响．采用紫外分光光度法测定BSA的吸附量．结果表明，蛋白质初浓度越高．温度越高，离子强度越大；蛋白质内部更多的疏水性氧基酸残基暴露于外部．吸附量增加：在等电点pH=4．7附近蛋白质沉积量最大．     

On the origin of geminal regioselectivity in the ene reaction of singlet oxygen with substituted alkenes

The geminal regioselectivity observed in the ene reaction between singlet oxygen and alkenes with anion-stabilizing groups is rationalized on the basis of a perepoxide intermediate, in which in analogy to the nucleophilic attack on protonated epoxides, the perepoxide is opened preferentially at the C---O bond weakened by the substituent.     

Calibration model of simultaneous multielement atomic-emission analysis using analytical line groups of each determined element

A calibration model of multielement methods for simultaneous determination of micro- and macro-concentrations of elements by computing the arc atomic-emission spectra has been developed. A calibration procedure for the analytical line group of the elements to be determined is offered. It allows the lower and upper limits of the concentration range for each line of the determined element to be calculated by means of the least-square method (LSM) and the Weibull distribution law is used to extend the concentration region. The calibration model was successfully tested for different arc optical emission spectroscopy (OES) methods. Received: 17 June 1997 / Revised: 3 November 1997 / Accepted: 7 November 1997     

Preparation of Y2Ba4Cu7O15-δ Superconductor without High Oxygen Pressure

The synthesis of bulk Y₂Ba₄Cu₇O_15-δ superconductor at atmospheric oxygen pressure via solid state sintering is reported. Temperature ranging from 860 to 890 °C as well as time interval over 2 to 15 days were used to investigate the formation of the Y₂Ba₄Cu₇O_15-δ phase. A time-temperature profile characterizing the conditions for the preparation of Y₂Ba₄Cu₇O_15-δ phase suggests the optimal condition to be sintering at 890 °C for over 10 days. Detailed results of X-ray diffraction, electrical resistivity, iodometric titration and magnetization measurements are described.     

X-ray studies of supported copper-aluminium catalysts

Structural peculiarities of the formation of copper-aluminium catalysts at copper concentrations <10 wt% and calcination temperatures of 573–1173 K have been studied.

---

<10% . 573–1173°K.

     

WxC-MCM-48催化剂的合成、表征及加氢脱硫催化性能

以正硅酸乙酯(TEOS)为硅源，十六烷基三甲基溴化铵(CTAB)为表面活性剂，仲钨酸铵为钨源，采用水热晶化法一步合成了不同钨含量(以Si、W物质的量比n_Si/n_W表示)的WO₃-MCM-48，然后经甲烷/氢气(V/V=1/4)混和气体程序升温还原碳化(TPC)，制备出了W_xC-MCM-48(x=1、2)催化剂，采用XRD、N₂吸附-脱附和NH₃-TPD对样品的结构进行了表征，用噻吩作为模型化合物，对W_xC-MCM-48催化剂的加氢脱硫催化活性进行了评价。结果表明，在一定钨含量的条件下，WO₃-MCM-48和W_xC-MCM-48样品仍然保持MCM-48的三维立方有序介孔结构，n_Si/n_W=30～15时，碳化钨的物相为W₂C；n_Si/n_W=7.5时，碳化钨为W₂C和WC物相，W_xC-MCM-48催化剂表现出了良好的加氢脱硫催化性能。     

仪器分析测试技术信息化教学探索与实践

针对高职学生的特点，以仪器分析测试技术课程实训教学为例，按照课前布置学习任务，学生翻转课堂学习，"教、学、做"一体化课堂教学，课后复习巩固的形式，开展信息化教学的探索与实践，并对信息化教学的效果和存在的问题进行了分析。通过信息化教学改革，仪器分析测试技术课程突破了传统教学时空的限制，激发了学生学习的兴趣，构建了"学生主体、教师主导"的教学新模式，提高了课堂教学效果，对推动高职课堂信息化教学的改革具有一定的借鉴意义。     

On-line preconcentration of arsenic from water samples with an anion-exchanger column coupled to a hydride generation ICP system

Summary An on-line anion-exchange preconcentration hydride generation ICP system for the determination of total inorganic arsenic in water is described. The column was packed with strongly basic anion-exchange resin (AG 1-X8). Experimental conditions including pH of the sample solution, eluent, flow rate of eluent, oxidation states of arsenic and competing anion ions were studied. Compared with the conventional continuous hydride generation ICP, a 9.2-fold improvement in sensitivity was obtained with RSD 1–2% at 100 ng/ml. The detection limit (3) was 0.08 ng/ml. The recoveries in water samples were satisfactory. The system provides complete automation of sample loading, eluting and regenerating of the resin.On leave from Shanghai Institute of Metallurgy, Chinese Academy of Sciences, Shanghai, China 200050