An Encryption Algorithm for Region of Interest in Medical DICOM Based on One-Dimensional eλ-cos-cot Map

Today, with the rapid development of the Internet, improving image security becomes more and more important. To improve image encryption efficiency, a novel region of interest (ROI) encryption algorithm based on a chaotic system was proposed. First, a new 1D eλ-cos-cot (1D-ECC) with better chaotic performance than the traditional chaotic system is proposed. Second, the chaotic system is used to generate a plaintext-relate keystream based on the label information of a medical image DICOM (Digital Imaging and Communications in Medicine) file, the medical image is segmented using an adaptive threshold, and the segmented region of interest is encrypted. The encryption process is divided into two stages: scrambling and diffusion. In the scrambling stage, helical scanning and index scrambling are combined to scramble. In the diffusion stage, two-dimensional bi-directional diffusion is adopted, that is, the image is bi-directionally diffused row by column to make image security better. The algorithm offers good encryption speed and security performance, according to simulation results and security analysis.     

碘化铅单晶体生长新方法探索

本文分析了用布里奇曼法生长碘化铅单晶体的结晶过程。发现坩埚下降法生长碘化铅单晶体过程中,碘的蒸发与凝结、铅的分凝与沉淀是影响晶体质量的两个重要因素。提出了采用U型安瓿提拉方式生长碘化铅单晶体的新方法,有效抑制了碘的蒸发并排除了分凝的铅,获得了桔红色半透明的碘化铅晶体。经测试,晶体的结晶性好,红外透过率达45%,电阻率为1.7×1012Ω.cm,为制备性能优异的碘化铅室温核辐射探测器奠定了基础。     

燃烧剂对低温燃烧合成Pr-CeO2粉体结构与性能的影响

以乙酸铵和柠檬酸为燃烧剂,Ce(NO3)3·6H2O和Pr6O11为主要原料,采用低温燃烧法(LCS)制备了Ce0.95Pr0.5O2纳米晶粉体.用DSC、XRD、SEM及色度测试等手段研究了Ce0.95Pr0.5O2纳米晶微粒前驱体的着火温度、产物晶体结构、晶体形貌及色度.结果表明:乙酸铵和柠檬酸作为燃烧剂的反应前驱体着火温度分别在250℃和300℃左右.两种燃烧产物均为单一的萤石型固溶体.与柠檬酸相比,乙酸铵作为燃烧剂得到的燃烧产物结晶程度更完善、Pr离子进入CeO2晶格的含量更多、呈色更好,且颗粒的团聚程度变小.根据Scherrer公式计算,用两种燃烧剂制备产物的平均晶粒尺寸分别为20～30 nm和10～15 nm,为纳米晶颗粒.最后得到Ce0.95Pr0.5O2粉体的颗粒尺寸则在200～300 nm之间.乙酸铵与硝酸铈的最佳摩尔配比为2:1,柠檬酸与硝酸铈的最佳摩尔配比为3:1.     

用化学溶液方法在Ni-5at%W基底上制备La2Zr2O7过渡层的研究

La2Zr2O7(LZO)过渡层以其独特的物理化学性质越来越受到人们的关注。本文以乙酰丙酮镧和乙酰丙酮锆为前驱盐,丙酸为溶剂配置前驱液,用化学溶液方法(CSD)在具有立方织构的Ni-5at%W基底上制备了LZO过渡层薄膜。研究了前驱液成分、性质以及退火温度对LZO成相以及取向的影响。用常规XRD和X射线四环衍射仪分析了LZO薄膜的相成分和织构。结果显示,在1050℃下退火可以获得强立方织构的LZO薄膜,其中(222)峰的Phi扫描半高宽值为8.95°;(400)峰的Chi扫描半高宽值为6.8°。用高分辨扫描电子显微镜(FE-SEM)观察到LZO薄膜表面均匀致密,没有裂纹和空洞。     

Tailoring Pore Structure and Morphologies in Covalent Organic Frameworks for Xe/Kr Capture and Separation

As a rising star among porous solid materials, covalent organic frameworks(COFs) with excellent properties including but not limit to facilely controllable structure, high porosity, and multi-chemical functionality represent significant potential for efficient ¹²⁷Xe/⁸⁵Kr capture and separation. In this study, through tuning the length of the organic ligands, two-dimensional(2D) COF mate-rials with identical connection group but different pore properties, denoted as ATFG-COF and TpPa-COF with AA-stacking model and TpBD-COF with AB-stacking model were synthesized and tested for Kr and Xe adsorption for the first time. Adsorption measurements indicate that the narrower pore apertures and higher porosity are conducive for COF materials to capture Xe and Kr. Furthermore, the Henry's constant, isosteric heat of adsorption(Q_st), and ideal adsorbed solution theory(IAST) selectivity of ATFG-COF, the pore size of which is closest to the kinetic diameter of the Xe atom(0.41 nm) among 2D COF materials, were carried out based on the single component sorption isotherms. The results illustrate that the high isosteric heat values of Xe/Kr adsorption on ATFG-COF are 25 and 16 kJ/mol at room temperature, respectively. Henry's law predicts that the selectivity factor of Xe to Kr is 6.07, consistent with the adsorption selectivity(ca. 6) calculated based on the IAST.     

耦合FE/WB法在声分析中的应用

简要描叙FE法(finite element method)和WB法(wave based method)的理论背景以及耦合FE/WB法的数学基础.耦合FE/WB法利用两者的优势——FE法的广泛应用和WB法的高收敛特性,将FE模型中较大且几何简单的部分采用WB法代替.耦合模型具有相对较少的自由度.对于较高的频率还可以进行细分得到更高的计算精度,并利用模态缩减法进一步减少自由度数.数值算例结果表明,该耦合方法有潜力覆盖中频段的声分析.     

铷原子中参量六波混频和量子拍的研究

在铷原子中实现了轴向相位匹配的参量六波混频,并探测到位于红外光谱区的六波混频信号.六波混频信号与泵浦激光进行和频,产生了位于可见光范围内的可调谐的和频信号,并从和频信号中观察到频率为608 cm 1的量子拍.结果表明,六波混频信号中的量子拍能够用于研究原子和分子的相干特性.     

基于CMOS图像传感器的成像系统设计

以OV 5 116CMOS图像传感器为例 ,讨论了基于CMOS图像传感器的成像系统的电路设计方法及系统设计中应注意的问题 ;并通过对CMOS图像传感器外围电路的优化设计实现了成像系统的微型化和轻量化。     

MOS器件辐照过程和辐照后效应模拟

模拟MOS器件脉冲电离辐射响应和长时间恢复效应.假设隧道电子从硅进入氧化层和界面态的建立是辐射效应的恢复机理.在整个退火恢复期,采用卷积模型并考虑了栅偏置压的效应.模拟结果表明:退火过程所加栅偏压的大小以及隧道电子效应与建立的界面态所占比例的不同影响器件的恢复率.     

基于铰链式六面顶压机的二级6-8模超高压大腔体内置加热元件的设计与温度标定

 首次报道了一种新型的基于铰链式六面顶压机的二级6-8模大腔体静高压装置的内置加热元件的设计与温度标定。此加热组装结构简单,升温快,保温效果好,并有效地解决了国外基于两面顶压机构架下的二级6-8模内加热组装中热电偶在施加压力时易断的问题。以低成本的碳管为加热元件,采用直接和间接两种加热方式,用双铂铑（Pt6%Rh-Pt30%Rt）B型热电偶进行温度测量,并根据实验过程中加热功率与腔内实际温度的关系,对不同压力下腔体内的温度进行了标定。实验结果表明：此加热系统的油压达到40 MPa（腔体压力约10 GPa）时,温度可以达到1 700 ℃以上;在油压为30 MPa、样品室温度为1 000 ℃时,保温时间可达2 h,甚至更长;实验中获得样品的直径可达3 mm,高度可达7 mm,实现了在高温超高压条件下大样品的制备,满足了实验对产生高温超高压条件的需要。