HYDROFORMYLATION CATALYSIS USING POLYMER-SUPPORTED MULTINUCLEAR RHODIUM CARBONYL CLUSTER CATALYSTS

A series of polymer-supported tetranuclear rhodium carbonyl cluster catalysts were prepared b the reaction of Rh_4(CO)_(12) with several kinds of polymer supports such as crosslinked poly (N-vinylpyrrolidone) (PNVP) and crosslinked poly ( styrene-co-maleic anhydride) (PMAn), and subsequently were used to catalyze the hydroformylation of olefins. The catalysts were characterized by IR, SEM and XPS. The influence of the supports structure and crosslinking, metal's content and particle size of the supports on the catalysts hydroformylation properties was studied. The factors which affect the catalytic conversion were also examined. The experimental results show that the polymer-supported Rh cluster catalysts possess very high catalytic activity and aldehyde selectivity as well as good reproducibility.     

新型醋酸乙烯酯／二乙烯苯共聚物的研究（Ⅱ）──醇解物的制备、结构及其性能

新型醋酸乙烯酯／二乙烯苯共聚物的研究（Ⅱ）──醇解物的制备、结构及其性能吴向东，郭贤权，何炳林（南开大学高分子化学研究所，天津，３０００７１）关键词皂化反应，醇解物，芳香族氨基酸，孔结构参数，吸附性能氨基酸失衡是指肝性脑病患者血液中芳香族氨基酸的浓度...     

芹菜中黄酮类物质的提取和测定

采用碱溶酸析法，成功地提取了芹菜中黄酮类物质。经HCl-镁粉反应和红外光谱鉴定，提取物为黄酮类物质。另外，利用分光光度法，以芦丁为标准对芹菜的叶和茎中的总黄酮分别进行了测定，其质量分数分别为10．19mg／g，3．064mg／g。同时讨论了时间及色素对测定方法的影响，结果表明，显色时间在40min内稳定，色素引起误差为5％。     

可聚合脂质体的研究 Ⅰ．含共轭双炔基团的两杂性单体及其脂质体

wo aα,w-dipolar amphiphiles, 10, 12-docosadiyne-1, 22-dicarboxylicacid (DDCA) and 10, 12-docosadiyne-1, 22-diol(DDOL)were synthesized by coupling the corresponding 10-undecylcarboxylic acid and 10-undecynol, respectively. They could form hybrid liposomes when ultrasonically dispersed with dimyristoylphosphatidylcholine (DMPC) at equal molar ratio. Liposome formation was confirmed by electron microscopy, UV measurement as well as encapsulation of fluorescent probes. UV irradiation of the mixed liposomes induced the polymerization of DDCA and DDOL on the liposomes, which could be followed by UV-Vis measurement.     

盐水振荡研究的新发现

在对化学振荡的研究中,无论是溶液均相氧化还原形成的振荡反应,还是界面扩散受阻形成的界面振荡,都普遍采取各种电极法来监测。前文[1,2]研究了各种不同电极监测液膜振荡的变化,本文将讨论不同的电极方法在监测盐水振荡现象过程中的新发现。1970年,地球物理学家Martin[3]发现把     

电化学合成铜配合物的研究

采用金属铜为"牺牲"阳极,首次在无隔膜电解槽中,电化学溶解金属铜一步制备了纳米CuO前体Cu(OEt)2, Cu(OBu)2, Cu(acac)2, Cu(OEt)(acac), Cu(OBu)(acac) (acac为乙酰丙酮基).产物通过红外光谱(FT-IR)、拉曼光谱(Raman spectrum)进行表征.同时讨论了影响电合成铜醇盐及其配合物的关键因素.实验表明,防止阳极钝化,温度控制在30～50 ℃,采用有机胺溴化物为导电盐, 电极电位控制在0.8～1.2 V之间,可以提高电合成效率.实验同时表明Cu(acac)2, Cu(OEt)(acac), Cu(OBu)(acac)可作为制备含铜纳米材料前驱体.     

A New Application of Carbon Nanotubes Constructing Biosensor

Carbon nanotubes used for constructing biosensor was described for the first time. Single-wall carbon nanotubes (SWNTs) functionalized with carboxylic acid groups were used to immobilize glucose oxidase forming a glucose biosensor. The biosensor response can be determined by amperometric method at a low applied potential (0.40V).     

A SAPO-11 Silicoaluminophosphate Molecular Sieve with Stable Crystal Structure

A SAPO-11 silicoaluminophosphate molecular sieve with stable crystal structure was synthesized for the first time. After removing template by calcination, its crystal space group still retains Icm2 which the as-synthesized has. The catalyst deriving from the present SAPO-I 1 materials shows higher isomerization selectivity and higher paraffin hydroisomerization yield than those reported elsewhere.