Broadband spin‐controlled focusing via logarithmic‐spiral nanoslits of varying width

This work presents analytical, numerical and experimental demonstrations of light diffracted through a logarithmic spiral (LS) nanoslit, which forms a type of switchable and focus‐tunable structure. Owing to a strong dependence on the incident photon spin, the proposed LS‐nanoslit converges incoming light of opposite handedness (to that of the LS‐nanoslit) into a confined subwavelength spot, while it shapes light with similar chirality into a donut‐like intensity profile. Benefitting from the varying width of the LS‐nanoslit, different incident wavelengths interfere constructively at different positions, i.e., the focal length shifts from 7.5 μm (at λ = 632.8 nm) to 10 μm (at λ = 488 nm), which opens up new opportunities for tuning and spatially separating broadband light at the micrometer scale.

     

"交叉学科"选题下的本科毕业论文的质量提升与探讨——以生物医用高分子材料为例

随着国家对人才培养要求的提高,各高校对本科生培养质量的重视程度提到新的高度,而本科毕业论文在本科生培养体系里占据极其重要的地位.交叉学科由于具有不同学科之间相互交叉、融合、渗透的特点,因此交叉学科选题对于本科生及指导教师提出了更高的要求,本文以生物医用高分子材料为例,从毕业论文选题的合理性、开题的目标和任务、实验指导思路与方法以及论文撰写的规范性四个方面着重探讨,并提出相关合理性意见,为促进交叉学科毕业论文质量的提高具有一定的借鉴意义.     

有机化学教学中的“三融合、二反思、四进阶”创新教学模式*

为培养出新时代创新人才,构建的“三融合、二反思、四进阶”教学模式有效提升了学生们科技创新能力。依据有机化学特点,创设科学发现情境,通过核心知识点网融合(挑战度)、理论实践交叉融合(高阶性)和化学思政融合(课程思政)“三融合”策略,不断激发学生们学习兴趣;通过教师反思、学生反思的“二反思”过程不断优化教学过程,改善教学效果;最终使具有不同知识层次的学生通过“四进阶”教学策略逐步提升科创能力(创新性)。     

硅表面活性剂增强的双网络耐高温多孔有机硅弹性体

采用聚醚改性三硅氧烷表面活性剂、 丙烯酸酯改性硅油和水3种组分制备了稳定的油包水(W/O)乳液, 经酸碱催化水解、 紫外引发聚合和干燥除水过程得到了双网络多孔有机硅弹性体. 扫描电子显微镜(SEM)分析结果表明, 所制备的有机硅弹性体具有丰富的孔径结构分布. 压缩强度测试结果表明, 弹性体具备良好的耐压缩性能, 45%压缩应变下循环50次, 仍具备良好的回弹性能. 有机硅弹性体具有优异的耐高温性能, 分解温度为370 ℃, 高于绝大多数多孔有机硅弹性体材料的分解温度. 丙烯酸酯改性硅油的制备工艺成熟、 廉价易得, 显著降低了多孔有机硅弹性体的生产成本, 为规模性开发有机硅材料提供了新的思路和应用前景.     

CoMn@NC催化5-羟甲基糠醛常压氧化为2, 5-呋喃二甲酸二甲酯

2, 5-呋喃二甲酸二甲酯(DMFDCA)这一生物质衍生的增值化学品是石油基聚合物单体对苯二甲酸(TPA)的理想替代品。本研究采用一步共热解法合成了两种廉价金属修饰的氮掺杂多孔碳催化剂CoMn@NC,并将其用于5-羟甲基糠醛(HMF)在温和条件下的需氧氧化。由Co₃Mn₂@NC-800催化HMF在50 ℃和常压氧气的条件下反应12 h后,得到产率为85%的DMFDCA。多孔催化剂的高比表面积提高了传质效率。Co纳米粒子(NPs)和呈原子级分散的Mn与掺杂在碳中的氮配位形成M―N_x。富含吡啶氮的碳基体中的缺电子金属位点有利于HMF和氧的活化。氧形成的超氧自由基阴离子的存在确保了半缩醛中间体和5-(羟基甲基)-2-糠酸甲酯(HMMF)的羟甲基的脱氢氧化,从而高选择性得到DMFDCA。该催化剂性能稳定,可适用于各种取代芳醇。该催化体系具有用于生产聚合物单体羧基酯的应用潜力。     

可待因及福尔可定的密度泛函理论计算模拟和表面增强拉曼光谱测定北大核心CSCD

运用密度泛函理论(DFT)对可待因及福尔可定进行几何构型优化,从而对标准品粉末的拉曼光谱的振动模式进行指认和归属,并与低浓度水平标准溶液的表面增强拉曼谱图进行比较。进一步优化了表面增强拉曼光谱检测条件,并摸索可待因及福尔可定的测定下限及定量分析的可行性。结果表明,可待因及福尔可定大部分特征峰拉曼位移的理论计算值、拉曼光谱测定值、表面增强拉曼光谱测定值是一致的,但会有一定程度的蓝移和红移;可待因、福尔可定的测定下限均为10 mg·L^(-1)。可待因在631.29 cm^(-1)和1 595.26 cm^(-1)处、福尔可定在628.58 cm^(-1)和1 251.41 cm^(-1)处的特征峰强度比值,与其对应的质量浓度(40~100 mg·L^(-1))呈线性关系。对空白基质进行加标回收试验,可待因和福尔可定的回收率分别为99.0%~105%和102%~104%,测定值的相对标准偏差(n=5)分别为5.3%,5.9%。上述方法可为这两种管制药品提供拉曼光谱检测的理论依据和快检支持。     

低共熔溶剂分散液液微萃取-悬浮固化-高效液相色谱法测定水产品中3种内分泌干扰物的含量北大核心CSCD

将癸酸和香叶醇在10 mL玻璃管中以2∶1的物质的量之比混合,然后将混合物在80℃水浴锅中加热,直至形成稳定的低共熔溶剂(DES)。该溶剂易合成、低成本、低毒性且具有高生物降解性,是一种新型的疏水性DES,可用于水产品中内分泌干扰物的微萃取。取已粉碎的水产品样品1 g和乙腈2 mL置于5 mL离心管中,以转速2 000 r·min^(-1)涡旋振荡3 min。取上清液400μL,经0.45μm滤膜过滤,滤液与100μL DES混合,并迅速注入装有5 mL 80 g·L^(-1)氯化钠溶液的10 mL离心管中,以完成DES的分散。将上述离心管以转速3 500 r·min^(-1)离心5 min,然后置于冰浴中进行固化。将固化后所得样品溶解于150μL甲醇中,以Eclipse Plus C;色谱柱为分离柱,以体积比90∶10的甲醇-水的混合液为流动相,在激发波长228 nm,发射波长305 nm处测定双酚A、4-叔辛基苯酚和壬基酚等3种内分泌干扰物的含量。结果表明,DES在冰浴中固化,可促进其从水溶液中分离,简单且快速,利于萃取剂的收集。3种内分泌干扰物的质量分数均在0.25~10μg·g^(-1)内与其对应的峰面积呈线性关系,检出限(3S/N)均为0.075μg·g^(-1)。用此法对空白加标样品进行测定,测定值的日内和日间相对标准偏差(n=5)均小于4.0%。以空白样品为基体进行加标回收试验,所得回收率为78.7%~91.6%。     

稀疏阈值的超分辨率图像重建

为了解决基于字典学习的超分辨重构算法耗时过长的问题,提出了基于稀疏阈值模型的图像超分辨率重建方法。首先,将联合字典理论与图像块稀疏阈值方法相结合,训练得到高、低分辨率过完备图像字典对。接着,通过稀疏阈值OMP算法对图像特征块进行稀疏表示。然后,通过高分辨率字典重构出初始的超分辨图像。最后,通过改进迭代反投影算法对初始的超分辨图像进行全局优化,从而进一步提高图像重构质量。实验结果表明,超分辨图像重构平均峰值信噪比(PSNR)为30.1 d B,平均结构自相似度(SSIM)为0.937 9,平均计算时间为10.2 s。有效提高了超分辨重构的速度,改善了重构高分辨图像的质量。     

Enhanced photovoltaic properties of polymer-fullerene bulk heterojunction solar cells by thermal annealing

The effect of a thermal annealing treatment on the performance of bulk heterojunction photovoltaic cells based on poly[2-methoxy-5-(2′-ethyl-hexyloxy)-p-phenylene vinylene] (MEH-PPV) and fullerene (C₆₀) composites is investigated. Upon thermal annealing at 120 ^°C, short-circuit current and power conversion efficiency (η) are more than tripled, while a sharp rise by eight times in and η is found for the device annealed at 200 ^°C. It is concluded that the improved phase separation between MEH-PPV and C₆₀ leads to the enhancement of and η at 120 ^°C, while thermodynamic molecule arrangement at the higher temperature of ∼200 ^°C induces a significant increase in all photovoltaic parameters of composite devices except the open-circuit voltage .     

Design,syntheses and antitumor activities evaluation of 1,5-diaryl substituted pyrazole secnidazole ester derivatives

According to the drug hybridization principle, a series of novel 1,5-diaryl substituted pyrazole secnidazole ester derivatives ( 6aa – 6gc ) have been synthesized by the combinations of various 1,5-diarylpyrazole-3-carboxylic acids with secnidazole. The in vitro antitumor/cytotoxicities activities against tumor and normal cell lines, including NCI-H460 (lung tumor cell), MCG-803 (gastric tumor cell), Skov-3 (ovarian tumor cell), BEL-7404 (liver tumor cell) and HL-7702 (normal liver cell), have been evaluated using MTT assay. All compounds showed promising inhibitory activities against four tumor cell lines. The IC₅₀ of 6bc against the BEL-7404 cell was 2.03 μM, and those of 6fc against the NCI-H460, MCG-803 and Skov-3 were 1.34, 0.14, and 0.87 μM, respectively. All these values were much lower than those of the cisplatin. Furthermore, 6fc and 6bc were also verified to be considerably safe for normal human liver cell, since the lower IC₅₀ values than cisplatin. Based on these results, the cell cycle analysis, apoptosis ratio detection and mitochondrial membrane potential assay of 6fc and 6bc were further performed aiming to investigate their inhibition mechanism of BEL-7404 cells. It is revealed that they have effectively inhibited the cell growth by arresting the BEL-7404 cells at S phase and induced apoptosis through the mitochondria-mediated pathway.