Polymer nano- and microspheres with bumpy and chain-segregated surfaces

Reported is a novel and simple method for the preparation of polymer spheres bearing hemispherical surface bumps where one type of polymer chains concentrates. The method is used to produce spheres with a diameter between approximately 30 and approximately 500 nm. Spheres with chain-segregated bumpy surfaces may find applications in drug delivery and other areas.     

Single‐Crystalline and Near‐Monodispersed NaMF3 (M=Mn,Co, Ni,Mg) and LiMAlF6 (M=Ca,Sr) Nanocrystals from Cothermolysis of Multiple Trifluoroacetates in Solution

We report the synthesis of single‐crystalline and near‐monodispersed NaMF₃ (M=Mn, Co, Ni, Mg), LiMAlF₆ (M=Ca, Sr), and NaMgF₃:Yb,Er nanocrystals (quasisquare nanoplates, nanorods, and nanopolygons) by the cothermolysis of multiple trifluoroacetates in hot combined organic solvents (oleic acid, oleylamine, and 1‐octadecene). The nanocrystals were characterized by XRD, TEM, superconductive quantum interference device (SQUID), and upconversion luminescence spectroscopy. By regulating the polarity of the dispersant, the NaMF₃ (M=Mn, Co, Ni) nanoplates were partially aligned to form nanoarrays on copper TEM grids. The sizes of the NaMF₃ nanocrystals were easily tuned by the use of proper synthetic conditions such as reaction temperature and time and solvent composition. On the basis of a series of experiments in which the reaction conditions were varied, together with GC–MS and FTIR analysis, the reaction pathways for the formation of these nanocrystals from trifluoroacetate precursors were proposed. The magnetic measurements showed that the differently sized NaMnF₃ square plates displayed interesting weak ferromagnetic behavior on the nanometer scale. The strong red upconversion luminescence emitted from the NaMgF₃:Yb,Er nanorods under 980‐nm near‐IR laser excitation suggests that NaMgF₃ may be a good candidate host material for red upconversion luminescence.     

Preparation ,Structural Characterization and Luminescent Property of Binucleasr Silver（Ⅰ）Complex Formed by Benzotriazole and 1—Hydroxymethyl Benzotriazole

Dinuclear silver (I) six‐membered ring complex [Ag₂ (bta)₂ ‐(hmbta)₂] (ClO₄)₂ (3) has been synthesized by the reaction of benzotriazole (bta) (1) and 1‐hydroxymethyl benzotriazole (hmbta) (2) with Ag (CH₃CN)₄ClO₄. The structures of compound 2 and Complex 3 have been studied by single crystal X‐ray diffraction analysis. The change of luminescent intensity of 1, 2 and 3 was reported. Compound 2 crystallizes in the monoclinic system with space group P2 (1)/c, a = 0.7655 (10) nm, b = 1.0126 (14) nm, c =0.9502 (13) nm, β = 95.07 (2)°, V = 0.7337 (17) nm³ and Z = 4. Complex 3 crystallizes in the triclinic system with space group P1, a = 0.73611 (18) nm, b = 0.9152 (2) nm, c = 1.2277 (3) nm, β = 87.170 (5)°, V = 0.8221 (3) nm³ and Z = 1. The main structural feature of complex 3 is a symmetric dinuclear six‐membered ring formed by two silver (I) atoms and four N‐atoms from two benzotriazoles. The second structural feature of complex 3 is the τ‐τ stacking interaction between two adjacent molecular planes, which forms the two‐dimentional layer structure. Besides, compared with 2, the luminescent intensity of complex 3 shows a remarkable enhancement.     

Electrochemical and spectral studies of the reactions of aquocobalamin with nitric oxide and nitrite ion

Electrochemistry and Raman spectroscopy have shown that aquocob(III)alamin (Cbl(III)) can be reduced by nitric oxide (NO) to form Cbl(II) on an electrode surface. The Cbl(II) formed in this way can bind NO to form nitrosyl-cobalamin, Cbl(II)-NO, which is reduced to form Cbl(I) at about -1.0 V vs a KCl saturated Ag/AgCl reference electrode. In addition, nitrite was found to bind both Cbl(III) and Cbl(II) and a binding constant of 3.5 x 10(2) M(-1) was measured for (NO(2)-Cbl(II))(1-). UV-vis spectrophotometry and mass spectroscopy were used to show that Cbl(I) reduces NO to form Cbl(II)-NO and N(2)O and N(2), and this reaction is involved in the cyclic voltammetry of cobalamin in the presence of excess NO where a catalytic reduction of NO occurs involving the cycling of Cbl(II)-NO/Cbl(I). This redox couple is also involved in the electrochemical catalytic reduction of nitrite. These results can be used to explain a number of physiological effects involving NO interaction in biological systems with added cobalamin or with cobalamin in the methionine synthase enzyme.     

镀金层识别及其厚度测定的X—荧光强度比值法

利用Ａｕ原子在Ｘ射线激发下所发射的Ｌβ线和Ｍ线的强度比值识别样品是镀金还是Ｋ金，同时利用这个比值测定镀金层的厚度，镀金层厚度的测定范围为０～４μｍ，测定值与标定值的相对误差小于１５％。     

新型化合物[Ni(en)3]2[Ni(en)2(H2O)2][As6V15O42]·4H2O晶体的水热合成与表征

金属氧酸盐因其在医药临床、工业催化、功能材料等方面的广泛应用而引起人们的关注[1～6], 其中, 有关钒化学的研究一直很活跃, 钒具有与钼、钨明显不同的结构特性, 钒可以采取VO4, VO5和VO6方式配位, 同时, 钒的价态可以是+3, +4和+5价. 由于钒可采取多种配位方式及多种价态, 与钼酸盐和钨酸盐相比, 钒酸盐更具有结构柔顺性, 同时易形成低价或混合价态物种.在以往的文献中, 有关P-V-O体系多金属氧酸盐的水热合成的研究已有大量的报道[7], 在常规溶液合成中, 人们已对As-V-O体系进行了相对深入的研究, 而有关水热合成的研究报道却很少, 已见报道的砷钒化合物有K6*6H2O[8,9], 4-[10], 6-[11](X=SO2-3, SO2-4, H2O). 为了探究水热条件下As-V-O体系的反应特性, 我们开展了这方面的研究工作, 并取得了突破性进展. 本文采用中温水热技术合成了含有机基团的砷矾超分子化合物2**4H2O, 探讨这类化合物的非线性光学性质、催化性质及其它功能特性将是一个非常有意义的研究领域.     

Mixed-valent diruthenium diphosphonate with kagomé structure

This paper reports the first example of diruthenium phosphonate with kagomé structure, namely, [NH3(CH2)4NH3][Ru2(hedpH(0.5))2].2H2O (hedp = 1-hydroxyethylidenediphosphonate). The compound contains kagomé layers that are linked by very strong hydrogen bonds into a nanoscale kagomé structure. Ferromagnetic interactions are mediated between the paramagnetic diruthenium units.     

流动注射—化学发光法测定苯甲醛

依据苯甲醛增强没食子酸－过氧化氢－氢氧化钠体系化学发光的性质，建立了苯甲醛的流动注射化学发光分析法。     

微分倒数示波计时电位法的研究—定量测试及滴定分析

首次利用微分倒数示波图定量测试微量金属离子并滴定分析药物，结果满意。