电机转子内部通风冷却系统的流动分析与结构改进

本文根据某电机通风冷却系统的总体流动性能分析结果,采用数值模拟方法分析了该电机转子冷却系统中形状最为复杂、流动损失最大的旋转槽道内部三维流场.采用区域分块与边界拼接方法建立网格系统,数值计算结果表明,该旋转槽道内结构存在改进空间.为减少流动的局部阻力损失,对原模型流道结构进行改进,并建立了新的三维模型.新模型数值模拟结果表明,改进后的结构可以在保证换热效果基本保持不变的情况下,大大降低槽道内部流动损失.     

玄参汤剂的荧光光谱分析

测量了相应的激发光谱以及溶液的pH值,发现同种玄参汤剂中的荧光峰值波长随着激发波长的增加而增加;冷浸玄参汤剂的荧光峰为441 nm,而沸煮玄参汤剂的为532 nm;相应激发光谱由双峰结构向单峰结构转变,并且激发峰值也有明显的红移;同时其pH值由5.5变化到4.1。结合有机物混合体系中的荧光产生机理,解释了上述现象的产生原因：玄参汤剂中的不同荧光分子之间的相互作用以及相同荧光分子内部的能量转移;加热所导致的荧光大分子含量的增加和荧光分子间氢键二聚体的形成。文章对中药玄参的药理学研究具有一定的参考价值,为玄参汤剂质量鉴定提供了一种有效的测量方法。     

Measurement and analysis of fission rates in a spherical mockup of uranium and polyethylene

Measurements of the reaction rate distribution were carried out using two kinds of Plate Micro Fission Chamber （PMFC）. The first is a depleted uranium chamber and the second an enriched uranium chamber. The material in the depleted uranium chamber is strictly the same as the material in the uranium assembly. With the equation solution to conduct the isotope contribution correction, the fission rate of 238U and 235U were obtained from the fission rate of depleted uranium and enriched uranium. Then, the fission count of 238U and 235U in an individual uranium shell was obtained. In this work, MCNP5 and continuous energy cross sections ENDF/BV.0 were used for the analysis of fission rate distribution and fission count. The calculated results were compared with the experimental ones. The calculation of fission rate of DU and EU were found to agree with the measured ones within 10% except at the positions in polyethylene region and the two positions near the outer surface. Because the fission chamber was not considered in the calculation of the fission counts of 238U and 235U, the calculated results did not agree well with the experimental ones.     

壳聚糖/SrHAP复合涂层的制备及其FTIR特征分析

在含有Sr2+,Ca2+,PO3-₄和壳聚糖(CHI)的电沉积液中,用恒电流沉积法,在医用纯钛(Ti)表面上得到壳聚糖/掺锶羟基磷灰石(SrHAP)复合涂层。采用扫描电镜(SEM)、能量弥散X射线谱(EDS)、X射线衍射(XRD)对涂层进行检测,用傅里叶变换红外光谱(FTIR)考察了壳聚糖和锶离子的掺杂对HAP涂层构象和生物活性的影响。结果表明：锶部分取代磷灰石中的钙,表面形貌由疏松的针状变为较致密的片状。FTIR分析表明,涂层中出现了典型的amideⅠ和amideⅡ的壳聚糖振动峰,则CHI与SrHAP杂化良好;模拟生理液浸泡后表面覆盖有球状类骨磷灰石,则涂层具备较好的生物活性。塔菲尔测试表明,复合涂层使得Ti表面的抗生理腐蚀性显著提高。     

基于多基因遗传规划的储层岩石静态模量预测

声发射技术作为一种动态无损检测手段,主要实现对材料产生的缺陷进行动态监测及损伤位置的预测。微机电系统声发射传感器在检测材料疲劳裂纹位置和扩展方向上应用广泛,实现其对材料裂纹的3-D动态位移检测,对于无损检测技术的发展具有重要意义。该文提出了一种新型3-D微机电系统声发射传感器,首先对3-D微机电系统声发射传感器进行了结构设计和性能分析,结构方面主要包括z方向响应传感单元和x、y方向响应传感单元设计;其次通过传感器的阻尼、谐振点处灵敏度计算,证明传感器的性能良好;最后采用有限元软件ANSYS对z方向响应传感单元做了模态和谐响应分析,x、y方向响应传感单元做了模态分析和谐响应分析,仿真结果与理论值吻合较好,验证了结构设计的合理性,对实现材料裂纹的三维动态检测具有一定的参考意义。     

基于数值模拟的飞行员高速气流吹袭损伤分析

研究飞行员高速气流吹袭的损伤机理,应用尺度适应模型对人椅系统外流场进行数值模拟.在马赫数为0.6,迎角为-90°~90°条件下的数值计算结果与风洞试验结果吻合较好.对不同马赫数、不同迎角的无防护状态下的人椅系统进行数值模拟,研究发现高速气流吹袭下飞行员面颈部、胸腹部、上臂内侧、小腿迎风侧压力较大;增大人椅系统的迎角可以改善飞行员身体各部分的受力情况.     

FIA微分光度法测定合金钢中钒的含量

基于二溴对甲基氯磺酚与钒(V)形成1∶1络合物在波长651nm处有最大吸收的特点,研究了适宜的实验条件,利用自制两个流通比色装置固定在检测器的样品光束和参比光束位置,实现微分光度测试(ΔA)、分析速度快达150次/h,RSD%=0.98,灵敏度是普通方法的1.8倍.并用于合金钢样品中钒的分析,结果满意.     

用于氢原子1S-2S光谱研究的超窄线宽243nm半导体激光

近年来,随着激光稳频技术的发展,人们可以把972nm的外腔半导体激光器产生的激光进行放大和四倍频,并将它锁定到超稳定的光学法布里-珀罗腔上,从而可以获得Hz量级超窄线宽的243nm激光,使其成为研究氢原子1S-2S双光子跃迁的有力工具.文章主要介绍了超稳腔、四倍频243nm半导体激光器的研究进展及在氢原子1S-2S双光子跃迁精密光谱研究中的应用.     

Differential equation dynamical system based assessment model in GNSS interoperability

With the development of Global Navigation Satellite System (GNSS),the idea of GNSS interoperability is born and has become the focus of study in the field of satellite navigation.The popularity for GNSS to augment the interoperability with the existing ones necessitates the study of the assessment algorithm of this idea.In this paper,an assessment algorithm for interoperability comprehensive benefits based on the differential equation dynamical system is discussed.There are two important aspects in GNSS tha...     

Effect of deuteron density distribution on the deduction of screening potential from the D(d,p)T reaction in Be metals

The D(d,p)T reaction in Be metal environments has been measured to investigate the electron screening effect in metals in an energy region of from 5.5 keV to 10 keV in a center of mass system(CMS)at a temperature of 121 K.The depth distribution of deuteron density in Be metals has an impact on the observed reaction yields.A model of deuteron density distribution in metal has been proposed to obtain the original yields.A screening energy of(116±46)eV has been obtained with the assumed deuteron density distribution model.