Glass transitions and mixed phases in block SBS

Differential scanning calorimetry (DSC) does not allow for easy determination of the glass‐transition temperature (T_g) of the polystyrene (PS) block in styrene–butadiene–styrene (SBS) block copolymers. Modulated DSC (MDSC), which deconvolutes the standard DSC signal into reversing and nonreversing signals, was used to determine the (T_g) of both the polybutadiene (PB) and PS blocks in SBS. The T_g of the PB block was sharp, at ?92 °C, but that for the PS blocks was extremely broad, from ?60 to 125 °C with a maximum at 68 °C because of blending with PB. PS blocks were found only to exist in a mixed PS–PB phase. This concurred with the results from dynamic mechanical analysis. Annealing did not allow for a segregation of the PS blocks into a pure phase, but allowed for the segregation of the mixed phase into two mixed phases, one that was PB‐rich and the other that was PS‐rich. It is concluded that three phases coexist in SBS: PB, PB‐rich, and PS‐rich phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 276–279, 2005     

Pressure effects in a plastic columnar discotic triphenylene

The effect of hydrostatic pressure on the structure of a plastic columnar discotic triphenylene has been investigated. The goal was to determine whether pressure can be used to modify electronic properties via changes in structural properties of columnar discotics to any significant extent. The findings are that (i) the intra- and inter-columnar distances are reduced in a nearly isotropic fashion, (ii) that the crystal sizes are reduced and (iii) that a transition takes place from a more highly ordered plastic columnar to a less ordered hexagonal columnar state with increasing pressure. The induced decrease of the molecular distances, amounting to 6% for pressures up to 17 kbar, are clearly too small to induce an appreciable modification of the electronic structure and thus opto-electronic properties.     

Application of N,N‐bis(diphenylphosphino)aniline palladium(II) complexes as pre‐catalysts in Heck coupling reactions

Palladium(II) complexes with N,N‐bis(diphenylphosphino)aniline ligands catalyse the Heck reaction between styrene and aryl bromides, affording stilbenes in good yield. The structures of two of the complexes used as pre‐catalysts have been determined by single‐crystal X‐ray diffraction. Copyright © 2007 John Wiley & Sons, Ltd.     

QUALITATIVE AND QUANTITATIVE ANALYSIS OF STOCHASTIC PROCESSES BASED ON MEASURED DATA, II: APPLICATIONS TO EXPERIMENTAL DATA

Analysis of stochastic processes governed by the Langevin equation is discussed. The analysis is based on a general method for non-parametric estimation of deterministic and random terms of the Langevin equation directly from given data. Separate estimation of the terms corresponds to the decomposition of process dynamics into deterministic and random components. Part I of the paper presented several possibilities for qualitative and quantitative analysis of process dynamics based on such decomposition. In Part II, some of these analysis possibilities are applied to experimental datasets from metal cutting and laser-beam welding.     

Control of a liquid–liquid heat exchanger

 The analytical solutions of equations describing the dynamics of distributed parameter systems are usually complicated in form and derivations and inconvenient to use for simulation and control system design. The liquid–liquid counter flow heat exchanger is an example of these disturbed parameter systems. An analytical solution of the dynamics of a symmetrically operated counter flow heat exchanger in the form of transfer function matrix is investigated in open-loop and close-loop conditions. The resulting non-linear model was linearized using perturbation approach. A feed-forward path controller to counteract at any disturbances in the boundary temperature and a non-interactive controller to decouple the outputs were implemented. Received on 22 February 2001 / Published online: 29 November 2001     

Needle Variations and Almost Lower Semicontinuous Differential Inclusions

It is shown that the construction of needle variations can be carried out for almost lower semicontinuous differential inclusions rather than for the case of ordinary single-valued continuously differentiable vector fields usually considered in the literature. The construction leads to needle variations whose flows are in general set-valued but still have good differentiability properties. The variations are constructed by using single-valued selections that are not necessarily continuous with respect to the state variable, but have instead a much weaker 'integral continuity' property, somewhat more general that the 'directional continuity' considered in previous work by A. Cambini and S. Querci, A. Pucci, and A. Bressan. The existence of many such selections is proved by slightly adapting an argument due to Bressan, extending it from the lower semicontinuous to the almost lower semicontinuous case, and strengthening it to yield not only directional continuity at all points but also full continuity at a specified point.     

Galactic model of element formation

A cosmological model is presented that produces He, C, O, D, Li, Be, and B in their observed abundances without a Big Bang. The elements are produced during the 1.5-Gy formation period of a galaxy, with C, O, and other heavy elements produced by stars of M>12 M₃ , He by stars of 6 M_s<M<12 M_s, and D, Li, Be, and B by cosmic-ray reactions in a nearly pure H plasma halo. Thus, the model shows that the major elements used in astrophysical studies can be produced during galactic formation by exactly the same processes known to function today at much lower rates     

On Critical Stability of Three Quantum Charges Interacting Through Delta Potentials

We consider three one-dimensional quantum, charged and spinless particles interacting through delta potentials. We derive sufficient conditions which guarantee the existence of at least one bound state.     

Self-broadening in the millimeter-wave spectrum of ozone

Self broadened widths of seven lines of ozone between 75 and 120 GHz have been measured at room temperature. The variation with temperature of the self-broadening parameter for three of these lines has been studied in the range 245–292°K.