Studies in the furan series

A study was made of certain transformations of the bicyclic compounds of the fur an series synthesized from 3,4-bis(chloromethyl)furan, N-butyl-4H, 6H-furo [3,4-c]pyrrole and 4H,6H-thieno[3,4-c]furan. On the basis of the same dichloride, 3,4-dimethyl furan and furan-3,4-dialdehyde were synthesized.For part XLVI, see [10].     

An NQR study of the effects on the torsional oscillations of a molecular crystal due to uniaxial pressures

This work reports the experimental results of the uniaxial pressure dependence at various temperatures of the spin-lattice relaxation time, T₁, in paradichlorobenzene single crystals.The directionality of the pressure dependence, together the temperature dependence ot T₁ near room temperature, give us some information about the dependence of the molecular torsional frequencies and lifetimes of the oscillations ground levels with the intermolecular crystalline potential.     

Equilibrium of the reaction between dissolved sodium sulfide and biologically produced sulfur

The equilibrium of the heterogeneous reaction between dissolved sodium sulfide and biologically produced sulfur particles has been studied. Biologically produced sulfur was obtained from a bioreactor of a hydrogen sulfide removal process in which the dominating organism is Thiobacillus sp. W5. Detailed knowledge of this reaction is essential to understand its effect on the process. The results were compared with the equilibrium of the reaction of sulfide with ‘inorganic’ elemental sulfur. The equilibrium between dissolved sodium sulfide and biologically produced sulfur particles can be described by an equilibrium constant, K_x, which consists of a weighted sum of constants for polysulfide ions of different chain length, rather than a true single equilibrium constant. For biologically produced sulfur pK_x = 9.10 ± 0.08 (21 °C) and 9.17 ± 0.09 (35 °C) with an average polysulfide chain length x = 4.91 ± 0.32 (21 °C) and 4.59 ± 0.31 (35 °C). The pK_x value for biologically produced sulfur is significantly higher than for reaction of dissolved sodium sulfide with inorganic sulfur (pK_x = 8.82; 21 °C). This difference is probably caused by the negatively charged polymeric organic layer, which is present on biologically produced sulfur but absent with “inorganic” sulfur. Specific binding of polysulfide ions to the organic layer results in a higher polysulfide concentration at the reaction site compared to the bulk concentration. This results in an apparent decrease of the measured equilibrium constant, K_x.     

Effect of the homogeneity of the column set on the performance of a simulated moving bed unit. I. Theory

Although it is impossible to manufacture identical columns for use in a simulated moving bed (SMB) process, theoretical studies assume that all the columns in an SMB unit have identical characteristics. In practice, calculations in modeling and optimization studies are made with the average values of each column parameter set. In this report, the effects on SMB process performance caused by column-to-column fluctuations of the parameters are discussed. As a first step, we show how the differences in porosity of the columns may be taken into account with a revised set of separation conditions. Reductions in the purity of the extract and the raffinate streams are quantitatively related to the column-to-column fluctuations of the retention times of the two components arising from these porosity differences. For the sake of simplicity, the discussion first addresses the case of a four-column SMB operating under linear conditions. Then, the scope is extended to the cases of SMB units incorporating several columns in each section and to SMB units operating under nonlinear conditions.     

Separation and identification of organic and organometallic compounds by use of a liquid chromatography-particle beam-glow discharge mass spectrometry combination

Evaluation of the particle beam glow discharge mass spectrometry (PB-GDMS) system as a detector for liquid chromatography (LC) is described for the analysis of polycyclic aromatic hydrocarbons, steroids, selenoamino acids, and alkyllead compounds. A particle beam interface is used to introduce analyte species from the LC into a glow discharge source for subsequent vaporization and ionization. Mass spectra display classic EI fragmentation patterns for the organic compounds, as well as elemental and molecular information for the organometallic compounds. Chromatographic separations display good temporal correlation between UV and PB-GDMS detection modes. Detection limits for Pb in lead nitrate, triethyllead, and triphenyllead fall in the sub-ppb (ng) range.     

Perturbation approach for frequency shifts in IR spectra of molecular clusters

A second order perturbation approach for the evaluation of the splitting and shifting of the infrared vibrational bands of molecular clusters, based on early publications of Buckingham, is presented. The Hamiltonian of the system comprises harmonic- and anharmonic intramolecular vibration terms, as well as the intermolecular potential. The anharmonic contributions of the intramolecular force field and the intermolecular potential are treated as a perturbation. In order to extend the applicability of the approach to homogeneous molecular clusters, the formalism of degenerate perturbation theory is employed. The new approach is applied to methanol clusters from dimer to hexamer for calculating the frequency shifts of the OH stretching mode (ω₁=3681.5 cm^?1), the CH₃ rocking mode (ω₇=1074.5 cm^?1), and the CO stretching mode (ω₈=1033.5 cm^?1). The numerical results compare favourably with experimental and previous theoretical data (except for ω₁), but with a tendency to overestimate the shifts.     

Oxidative addition of some geminal halonitroalkanes to iridium(I) and platinum(0) compounds

Oxidative addition of 1-chloro-1-nitroethane to trans-IrCl(CO)-[P(CH₃)₂C₆H₅]₂ followed by treatment of the initial product with pyridine yields a new iridium(III) complex IrCl(py)[COC(NO₂)CH₃][P(CH₃)₂C₆H₅]₂, whose structure has been confirmed by X-rays crystallography. Two intermediate products have been observed by NMR spectroscopy; their structures have been tentatively assigned. The reaction of the corresponding bromine derivatives yields two isomers of the composition IrBr₂(CO)[CH(NO₂)CH₃][P(CH₃)₂C₆H₅]₂, and these are not affected by pyridine. The reaction of 1-chloro-1-nitroethane with Pt[P(C₆H₅)₃]₄ takes a completely different course in that yields nitrorethane and cis-PtCl₂[P(C₆H₅)₃]₂ as the main products, with no detectable formation of the products of oxidation addition. A brief mechanistic investigation points towards the participation of radicals and radical anions as transient intermediates and a mechanism is proposed which explains most of the experimental results.     

Production of electronically excited NF by the reaction of fluorine atoms with HN3

Electronically excited NF in both the a¹Δ and b ¹Σ⁺ states hasbeen observed from the reaction of fluorine atoms with HN₃. The results suggest that fluorine atoms first abstract the hydrogen atom from HN₃, then react with the remaining N₃ to form NF^≠(a¹Δ). NF^*(b¹Σ⁺) is produced by a subsequent energy pooling reaction between NF^≠(a¹Δ) and vibrationally excited HF. The rate of the F + N₃ reaction is estimated to be ≈ 10¹² and ³ mole^?1 s^?1.     

Influence of wilt infection on the gossypol pigments of seeds and roots of a cotton plant of the variety Tashkent-1

A study has been made of the gossypol pigments of the seeds and roots of a cotton plant of the variety Tashkent-1 infected with wilt in comparison with a healthy plant. The amount of gossypol in the infected plant was lower than in the healthy plant. In the diseased plant, gossypurpurin was concentrated in the roots, and in the healthy plant it was concentrated in the seeds. Gossypol possessing optical activity was detected in the seeds and roots of both the healthy and the diseased plants.Institute of the Chemistry of Plant Substances, Uzbek SSR Academy of Sciences, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 63–66, January–February, 1989.     

Thermal decomposition of dicyclopentadienylarylvanadium compounds

The thermolysis of compounds of the type Cp₂VR (R = aryl) in the solid state has been studied. A distinct increase in thermal stability is observed upon substitution of the ortho-position of the aryl group. Thermal decomposition occurs with formation of RH, Cp₂ V, a vanadocene homologue with the group R substituted in one of the Cp rings and, probably, a vanadocene homologue with two substituted Cp rings. It is shown that the abstraction of the hydrogen atom from the cyclopentadienyl ring, necessary for the formation of RH, is an intermolecular process, whereas the substitution of the aryl group in the Cp ring is intramolecular. A decomposition mechanism is proposed in which the group R is transferred from the vanadium atom to the C₅H₅ ring of the same molecule by interaction with an aryl group of another molecule. The thermal decomposition of Cp₂VR is compared with that of the analogous titanium compounds.