Measurement of <Superscript>3</Superscript>H,gross <Emphasis Type="Italic">α/β</Emphasis> and <Superscript>222</Superscript>Rn in drinking water using the new Quantulus GCT 6220

Since the introduction of the European Council Directive 2013/51 Euratom in October 2013, the analysis of drinking water has increasingly become the focus of many laboratories in Europe. The activity of tritium, radon and the gross α/β-activity is determined routinely. In order to cope with the increased sample numbers and to reach the necessary detection limits, sensitive measuring devices are required. This work was done with the new Quantulus GCT 6220 to test the sensitivity of this system for drinking water analysis. The results indicate that this instrument is very well suited for this type of analysis and counting times are typically below the required counting times of established systems.     

Sulphur content estimation of Venezuelan heavy oil by fast neutron and gamma transmission technique

A compact and modern equipment for implementing the fast neutron and γ-ray transmission technique (FNGT) has been developed in order to estimate the sulphur content of crude oil. FNGT is employed for non- destructive analysis of different kinds of samples. The compact system presented in this work represents an improvement of our previous experimental set-up [1, 2]. It makes use of a ²⁵²Cf source, an EJ-301 liquid scintillator detector (2″ × 2″) with excellent n/γ discrimination capabilities, and modern nuclear electronics based on fast digitizers. The fast neutron and gamma transmission technique was employed to study a system for on-line sulphur concentration measurement in Venezuelan heavy sour oil. The range of sulphur concentrations investigated is between 0.1 and 6.5 wt%. The equipment performances and limitations are compared with those predicted by a Monte Carlo model built in GEANT4 v10.01. The results show the possibility to implement a compact unit for on-line determination of sulphur concentration in crude oil.

     

Chromatographic separation of americium from europium using bis-2,6-(5,6,7,8-tetrahydro-5,9,9-trimethyl-5,8-methano-1,2,4-benzotriazin-3-yl) pyridine

The separation of americium(III) from europium(III) was achieved utilizing a bis-2,6-(5,6,7,8-tetrahydro-5,9,9-trimethyl-5,8-methano-1,2,4-benzotriazin-3-yl) pyridine (CA-BTP) chromatographic resin. The extraction chromatographic materials were prepared using various concentrations of CA-BTP. This new, hydrolytically stable extractant was impregnated on an inert polymeric support at 40% loading. The uptake of Am(III) and Eu(III) by this material from 0.1 to 4.0 M aqueous HNO₃ solutions was measured. The resulting dry weight distribution ratios, D _w , indicated a strong preference for Am(III) with little affinity for Eu(III). These results are similar to recently reported solvent extraction studies indicating a maximum uptake of Am(III) in the 0.5–1.0 M HNO₃ range. The resin preparation, performance, and characterization of the Am/Eu separation are reported herein.

     

Immobilization and Stabilization of Beta-Xylosidases from Penicillium janczewskii

β-Xylosidases are critical for complete degradation of xylan, the second main constituent of plant cell walls. A minor β-xylosidase (BXYL II) from Penicillium janczewskii was purified by ammonium sulfate precipitation (30% saturation) followed by DEAE-Sephadex chromatography in pH 6.5 and elution with KCl. The enzyme presented molecular weight (MW) of 301 kDa estimated by size exclusion chromatography. Optimal activity was observed in pH 3.0 and 70–75 °C, with higher stability in pH 3.0–4.5 and half-lives of 11, 5, and 2 min at 65, 70, and 75 °C, respectively. Inhibition was moderate with Pb⁺² and citrate and total with Cu⁺², Hg⁺², and Co⁺². Partially purified BXYL II and BXYL I (the main β-xylosidase from this fungus) were individually immobilized and stabilized in glyoxyl agarose gels. At 65 °C, immobilized BXYL I and BXYL II presented half-lives of 4.9 and 23.1 h, respectively, therefore being 12.3-fold and 33-fold more stable than their unipuntual CNBr derivatives (reference mimicking soluble enzyme behaviors). During long-term incubation in pH 5.0 at 50 °C, BXYL I and BXYL II glyoxyl derivatives preserved 85 and 35% activity after 25 and 7 days, respectively. Immobilized BXYL I retained 70% activity after 10 reuse cycles of p-nitrophenyl-β-D-xylopyranoside hydrolysis.

     

Effect of heterocyclic ring system on formation of dimeric quinolones under catalyst-free conditions: a green approach

The intermediate-dependent green and efficient synthesis of dimeric quinolones 4a–l and 7a–l by the Knoevenagel condensation followed by Michael-type addition of 4-hydroxy-1-methylquinolin-2(1H)-one 1a, b to indole-3-aldehydes 2a–f and aromatic aldehydes 5a–l in water through the condensed compound 3a–l under catalyst-free conditions is described. This reaction was found to be environmentally friendly, has easy-workup and shorter reaction times giving good yields of the product without the need for its isolation using column chromatography.     

Synthesis of RE Y zeolite for formulation of FCC catalyst and the catalytic performance in cracking of n-hexadecane

Research on Chemical Intermediates - This study presents the synthesis of rare earth-doped Y (RE Y) zeolite, its application in formulation of a fluid catalytic cracking (FCC) catalyst and the...     

Tandem Michael addition–Claisen-type condensation of anions of O-ethyl carbonates of cyanohydrins to cyclohex-2-en-1-one

A one pot method for the synthesis of ethyl 2-acetoxy-6-aroylcyclohex-1-ene-1-carboxylates and ethyl 2-acetoxy-6-heterocarbonylcyclohex-1-ene-1-carboxylates through Michael addition of the anions of ethyl carbonates of cyanohydrins to cyclohex-2-en-1-one and subsequent reaction with acetic anhydride is described. These compounds are potential intermediates for the synthesis of 9,10-anthraquinone and heterofused 1,4-naphthoquinone derivatives.     

Atomically flat single terminated oxide substrate surfaces

Scientific interest in atomically controlled layer-by-layer fabrication of transition metal oxide thin films and heterostructures has increased intensely in recent decades for basic physics reasons as well as for technological applications. This trend has to do, in part, with the coming post-Moore era, and functional oxide electronics could be regarded as a viable alternative for the current semiconductor electronics. Furthermore, the interface of transition metal oxides is exposing many new emergent phenomena and is increasingly becoming a playground for testing new ideas in condensed matter physics. To achieve high quality epitaxial thin films and heterostructures of transition metal oxides with atomically controlled interfaces, one critical requirement is the use of atomically flat single terminated oxide substrates since the atomic arrangements and the reaction chemistry of the topmost surface layer of substrates determine the growth and consequent properties of the overlying films. Achieving the atomically flat and chemically single terminated surface state of commercially available substrates, however, requires judicious efforts because the surface of as-received substrates is of chemically mixed nature and also often polar. In this review, we summarize the surface treatment procedures to accomplish atomically flat surfaces with single terminating layer for various metal oxide substrates. We particularly focus on the substrates with lattice constant ranging from 4.00 Å to 3.70 Å, as the lattice constant of most perovskite materials falls into this range. For materials outside the range, one can utilize the substrates to induce compressive or tensile strain on the films and explore new states not available in bulk. The substrates covered in this review, which have been chosen with commercial availability and, most importantly, experimental practicality as a criterion, are KTaO₃, REScO₃ (RE = Rare-earth elements), SrTiO₃, La_0.18Sr_0.82Al_0.59Ta_0.41O₃ (LSAT), NdGaO₃, LaAlO₃, SrLaAlO₄, and YAlO₃. Analyzing all the established procedures, we conclude that atomically flat surfaces with selective A- or B-site single termination would be obtained for most commercially available oxide substrates. We further note that this topmost surface layer selectivity would provide an additional degree of freedom in searching for unforeseen emergent phenomena and functional applications in epitaxial oxide thin films and heterostructures with atomically controlled interfaces.     

Thin films of V2O5/MoO3 and their applications in electrochromism

Journal of Solid State Electrochemistry - Pure and doped vanadium pentoxide (V2O5, V2O5/MoO3) thin films were prepared by sol-gel method and dip coating technique. Furthermore, they were...     

Zirconium oxide films: deposition techniques and their applications in dye-sensitized solar cells

Zirconium oxide (ZrO₂) is acquiring considerable attention of most of the research groups and leading to a large number of publications due to its unique properties, especially in the context of emerging trends in the third generation of solar cell research. ZrO₂ films offer magnificent aspects related to physicochemical properties, and the properties are found to be dependent on synthesis methods. In the present review, various deposition techniques used to grow zirconium oxide thin films and their application to enhance the quantum efficiency of titanium oxide (TiO₂) based dye-sensitized solar cells (DSSCs) are discussed. Also, the modulated performances of DSSCs fabricated by growing the conformal ZrO₂ insulating films to retard interfacial recombination dynamics on preformed TiO₂ films are discussed.

Open image in new window

Graphical abstract ?