Secondary Metabolites of Mahonia bealei

Chemistry of Natural Compounds -     

The method of matched asymptotic expansions for the periodic solution of the van der pol equation

The purpose of this paper is to apply the method of intermediate matching for connecting the four local asymptotic solutions of the Van der Pol equation, given by Dorodnicyn [1]. It turns out that for the approximation of the periodic solution a fifth local solution is needed. The present approach results in a reduction of the computational work. The amplitude of the periodic solution is determined up to a higher order accuracy in v than has been done so far.     

Deformation und Stabilität windbeanspruchter Kühlturmschalen

Übersicht Nach der Formulierung des Deformations- und des Stabilitätsproblems auf der Grundlage ursprünglich nicht-konformer, dreiecksförmiger, gekrümmter finiter Elemente wird zunächst das Deformationsproblem für eine ausgeführte Kühlturmschale numerisch gelöst. Die nachfolgende Stabilitätsanalyse dieser Kühlturmschale zeigt gute Übereinstimmung der mittels der Methode der finiten Elemente errechneten Beulsicherheit mit dem aufgrund des Munganschen Beulkriteriums erhaltenen Kleinstwert der Beulsicherheit.

---

Summary Following the formulation of the deformation and stability problem on the basis of originally non-conforming triangular curved finite elements with the help of a variational principle with subsidiary conditions, the deformation problem is solved numerically for an existing cooling tower shell. The subsequent stability analysis of this cooling tower shell shows relatively good agreement of the buckling safety computed by means of the finite element method and the minimum of buckling safety obtained with the help of Mungan's stability criterion.

---

---

Diese Arbeit wurde mit Unterstützung der Cooling Tower Division von Zurn Industries, Tampa, Florida, USA, begonnen und mit Unterstützung Seitens des Fonds zur Förderung der wissenschaftlichen Forschung, Wien, zu Ende geführt. Beiden Sponsoren Sei an dieser Stelle aufrichtig gedankt. Der erstgenannte Autor ist darüber hinaus der Max Kade Foundation, New York, N. Y., für die Finanzierung Seines Studienaufenthaltes an der Cornell University, Ithaca, N. Y., im Rahmen dessen er mit der Thematik dieses Aufsatzes konfrontiert wurde, zu Dank verpflichtet. Aus demselben Grund sagt der dritte Autor für ein NATO Fellowship Dank.     

Bond stresses for a composite material reinforced with various arrays of fibers

The problem treated here is that of an isotropic body having a doubly periodic rectangular or triangular array of perfectly bonded circular elastic inclusions. The body is in tension or compression. This simulates a composite material wherein a relatively weak matrix is reinforced by stronger (and more rigid) fibers. Bond stresses for both rectangular and triangular arrays have been calculated using either boundary point matching or boundary point least squares techniques. Numerical results based on a plane strain analysis are given in graphical form.     

Ten-deg off-axis test for shear properties in fiber composites

A combined theoretical and experimental investigation was conducted to assess the suitability of the 10-deg off-axis tensile-test specimen for the intralaminar-shear characterization of unidirectional composites. Composite mechanics, a combined-stress failure criterion and a finiteelement analysis were used to determine theoretically the stress-strain variation across the specimen width and the relative stress and strain magnitudes at the 10-deg plane. Strain gages were used to measure the strain variation across the specimen width at specimen midlength and near the end tabs. Specimens from Mod-I/epoxy. T-300/epoxy, and S-glass/epoxy were used in the experimental program. It was found that the 10-deg off-axis tensile-test specimen is suitable for intralaminar-shear characterization and it, is recommended that it should be considered as a possible standard test specimen for such a characterization.     

Direct-contact heat transfer to a spherical liquid/vapor two-phase bubble trailing a wake

The paper deals with the heat transfer causing evaporation of liquid drops in a medium of an immiscible, less volatile liquid. Each drop turns into a two-phase bubble, consisting of a growing vapor phase and a reducing liquid phase, which continues to buoy up in the medium. The bubble is modeled as a sphere in which the yet-to-be vaporized liquid spreads over the rear surface while the rest is occupied by the heat-insulating vapor phase. The rear surface to serve as the effective heat transfer area is assumed to be covered with an axisymmetric wake instead of a boundary layer flow. The quasi-steady, overall heat transfer through the wake in the medium and the layer of the yet-to-be vaporized liquid in the bubble is predicted and compared with relevant experimental results.Die Untersuchung befaßt sich mit der durch die Verdampfung von Flüssigkeitstropfen in einem aus unvermischbarer, flüchtiger Flüssigkeit bestehendem, Medium verursachten Wärmeübertragung. Aus jedem Tropfen entsteht eine Zweiphasenblase, bestehend aus einer wachsenden Dampfphase und einer abnehmenden Flüssigkeitsphase, die in das Medium aufsteigt. Die Blase wird anhand eines Kugelmodells betrachtet, an dem sich die noch nicht verdampfte Flüssigkeit über die Rückseite verteilt und die restliche Fläche mit der wärmeisolierenden Dampfphase behaftet ist. Es wird angenommen, daß sich an der Rückseite als wirksamer Wärmeübergangsbereich ein achsensymmetrischer Nachlauf bildet. Es werden die quasi-gleichförmige Wärmeübertragung durch den Nachlauf in das Medium und durch die Schicht Lage der nicht verdampften Flüssigkeit in der Blase mathematisch berechnet und mit relevanten Versuchsergebnissen verglichen.     

Throughput and coupling in optical fibers

Optical throughput, namely the product of area times subtending solid, is a useful concept in calculations of light coupling to optical fibers. It is invariant through an optical system, thus providing a simple and elegant way to derive the maximum coupling efficiency between a light source and a fiber, regardless of intervening optics. Because throughput is proportional to the number of modes supported by an optical structure, it also yields the distribution of modal power within a fiber.In this paper, we illustrate applications of throughput by calculating light coupling into fibers and mode distribution within.     

Vortex structure in laminar boundary layers on a concave wall

Naturally occurring Görtler vortices have been investigated, using laser anemometry, in the laminar concave-surface boundary layers of water channels with 90° bends. Distributions of streamwise and spanwise velocities are presented, supported by flow visualization. Amplification was found to cease at Görtler numbers in the region of 9, followed by increasing distortion and spanwise wandering of the vortices. Development of a vortex system from an imposed disturbance has also been predicted by numerical computations.