Matrixreaktion von GaF mit o-atomen: ir-spektrum von OGaF

It is possible to synthesize OGaF in an argon matrix by co-condensation of GaF with O atoms. The stretching vibrations of this compound are found at 943 and 690 cm⁻¹ (¹⁶O⁶⁹GaF). An exact calculation of the force field is possible with the aid of the observed ¹⁶O/¹⁸O and ⁶⁹Ga/⁷¹Ga shifts. The following force constants are found: f(GaO) = 6.32; f(GaF) = 4.69; f(GaO/GaF) = −0.1 [10²Nm⁻¹]     

Ligand exchange reactions of ferrocene with phenanthrene or 9,10-dimethylphenanthrene in the presence of aluminum chloride and aluminum

Ligand exchange reactions between phenanthrene or 9,10-dimethylphenanthrene with ferrocene effected in the presence of AlCl₃-Al were carried out under a variety of conditions. With phenanthrene (I), hydrogenation at the C-9 and C-10 positions could take place during the reaction and the cationic products obtained were the η⁶-phenanthrene-η⁵-cyclopentadienyliron and η⁶-9,10-dihydro-phenanthrene-η⁵-cyclopentadienyliron moncations (II and III), and the η⁶-phenanthrene-$\text{trans}$-$\text{bis}$-η⁵-cyclopentadienyliron and η⁶-9,10-dihydrophenanthrene-$\text{trans}$-$\text{bis}$-η⁵-cyclopentadienyliron dications (IV and V). With 9,10-dimethylphenanthrene (VI), reactions carried out in refluxing cyclohexane gave the non-hydrogenated η⁶-9,10-dimethylphenanthrene-η⁵-cyclopentadienyliron monocation (VII) and η⁶-9,10-dimethylphenanthrene-$\text{trans}$-$\text{bis}$-η⁵-cyclopentadienyliron dication (VIII). When higher temperatures were used in an attempt to promote hydrogenation, decomposition predominated and no cationic product could be obtained. These finding are discussed and contrasted with previous results obtained from similar reactions using anthracene or 9,10-dimethylanthracene.     

Reproducibility of glass open tubular columns in a production environment — Two years of experience

Summary The problems associated with the preparation of glass open tubular (capillary) columns are well documented in the literature. These problems are even more evident if column production is done on a routine basis, in a production environment. On the other hand, from the point of the user who wants to rely on a supplier, the reproducible quality of the columns is crucial. Here quality does not only mean efficiency but also refers to the reproducibility of the average liquid film thickness (capacity ratio) and the relative retention, as well as the tube treatment influencing the polarity of the column tube. In a paper published one year ago [1] our investigation concerning the reproducibility of the column manufacturing process was reported. The present paper continues this investigation. Four different columns will be considered: two types of OV-101 columns with thin and thick liquid film as well as columns prepared with Carbowax 20M and DEGS liquid phases. The consistency of their characteristics and efficiency will be investigated. Column characteristics include the capacity ratio which is directly related to the thickness of the liquid phase film. Column efficiency is investigated with help of the HETP and peak resolution. The effective and theoretical plate numbers are compared and the incorrectness of the assumption that the former is better suited for column testing is demonstrated. Relative retention reproducibility of even difficult peak pairs shows the consistency of column wall treatment. Finally, the consistency and performance of shorter columns obtained by the breaking of long columns will be discussed.Paper presented at the Second International Symposium on Glass Capillary Chromatography, Hindelang, Allgäu, Federal Republic of Germany, May 2–6, 1977.     

1,2,4-Triazine and triazole derivatives from α-keto acids and thiosemicarbazides

Thiosemicarbazides of 2-hydroxyphenylglyoxylic acid, which, depending on the conditions, undergo cyclization to interconvertible 5-(2-hydroxyphenyl)-6-oxo-1,2,4-triazine-3-thiones or (2-hydroxy-benzoyl)-²-1,2,4-triazoline-5-thiones, are formed by the action of thiosemicarbazide and its homologs on coumarindione. The thiosemicarbazones of 2-hydroxyphenylglyoxlyic and other 2-substituted phenylglyoxylic acids undergo cyclization to 6-(2-hydroxyphenyl)-5-oxo-1,2,4-triazine-3-thiones.Deceased.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp, 116–121, January, 1977.     

Statistical mechanical treatment of protein conformation. III. Prediction of protein conformation based on a three-state model.

The method proposed for the evaluation of statistical weights in paper I, and the three-state model [alpha-helical (alpha), extended (epsilon), and other (c) states] formulated in paper II, have been used to develop a procedure to predict the backbone conformations of proteins, based on the concept of the predominant role played by shortrange interactions in determining protein conformation. Conformational probability profiles, in which the probabilities of formation of three consecutive alpha-helical conformations (triad) and of four consecutive extended conformations (tetrad) have been defined relative to their average values over the whole molecule, are calculated for 19 proteins, of which 16 had been used in paper I to evaluate the set of statistical weights of the 20 naturally occurring amino acids. By comparing these conformational probability profiles to experimental x-ray observations, the following results have been obtained: 80% of the alpha-helical regions and 72% of the extended conformational regions have been predicted correctly for the 19 proteins. The percentage of residues predicted correctly is in the range of 53 to 90% for the alpha-helical conformation and in the range of 63 to 88% for the extended conformation for the 19 proteins in the two-state models [alpha-helical (alpha) and other (c) states, and extended (epsilon) and other (c) states]. In the three-state model, the percentage of residues predicted correctly is in the range of 47% to 77 for 19 proteins. These results suggest that the assumption of the dominance of short-range interactions, on which the predictive scheme is based, is a reasonable one. The present predictive method is compared with that of other authors.     

Lifetimes of Hg(3P0) complexes with methanol,ammonia, and water

Lifetimes of Hg(³P₀) complexes were determined by simultaneous observation of Hg(³P₀) optical absorption and complex emission, using a modulation technique and phase sensitive detection. The lifetimes of the mercury complexes with methanol, (1.4 ± 0.7) × 10^-8 s, and water, ? 8 × 10^-8 s, were found to be much shorter than reported in earlier work. For the ammonia complex, however a lifetime was measured which is in good agreement with previous determinations. Reasons for the large errors in earlier work where the methanol and water complex lifetimes were determined from complex emission data alone are discussed, and these data are reinterpreted. In the reaction rate of Hg(³P₀) with methanol no detectable contribution from the termolecular process Hg(³P₀) + 2CH₃OH → (Hg·CH₃OH)^* + CH₃OH could be observed.     

Transformations of substituted tetrahydro-8h-indeno[1,2-d]imidazoles in concentrated sulfuric acid

The five-membered ring of the indene system in 2,8-dioxo-3a-hydroxy-8a-R-1,2,3a,8a-tetrahydro-8H-indeno[1,2-d]imidazoles is hydrolytically cleaved in concentrated sulfuric acid solutions. Depending on the reaction conditions, compounds for which substituted 4-(o-carboxyphenyl)imidazol-2-one (II), 1,8-dioxo-1,2-dihydro-8H-imidazo[4,3-a]isoindole (III), and spiro[imidazolidine-4,3′-phthalide] structures were assumed were isolated.     

Chelate mit Diimin- und Thiol-Struktur: Analytische Anwendung der Di-(4-substituierten)-thiosemicarbazone von 1,2- und 1,3-Diketonen

Zusammenfassung In der Gruppe der vierzähnigen Liganden mit Diimin- und Thiolstruktur bilden die Bisthiosemicarbazone von 1,2- und 1,3-Diketonen mit 4-substituierten Thiosemicarbaziden intensiv gefärbte Metallchelate, die für extraktionsphotometrische Bestimmungen in der Spurenanalyse verwendet werden können. Die molaren Extinktionskoeffizienten liegen im Bereich 5000–16000. Die leichte Zugänglichkeit von 4-substituierten Thiosemicarbaziden über die Reaktion von Isothiocyanaten mit Hydrazin bietet eine große Auswahl von Reagentien, besonders für die Flüssig-Chromatographie zur Trennung von komplexen Chelatgemischen.Die Arbeit wurde aus den Mitteln der Deutschen Forschungsgemeinschaft Bonn-Bad Godesberg gefördert.     

Untersuchungen zur Temperaturabhängigkeit charakteristischer IR-Absorptionen, 9. Mitt.: Zur Tautomerie des “o-Hydroxymandelsäurelactons”

Zusammenfassung Die Abhängigkeit der Struktur des o-Hydroxymandelsäurelactons von Lösungsmittel und Temperatur wird mit Hilfe IR- und NMR-spektroskopischer Methoden nachgewiesen.

---

The temperature and solvent dependence of the structures of 2-hydroxymandelic acid lactone and dioxindole have been shown by IR and NMR spectroscopy.

     

Methods and Results of Optical Investigations on Semiconductor Interfaces

Measurement of the state of polarization of reflected light (ellipsometry) permits the determination of the thickness and refractive index of thin layers formed on a surface. The IR absorption spectra of such thin layers, which can be measured by means of internal reflection spectroscopy (IRS), provide information about their chemical composition. These methods have been used to study adsorption processes and the formation of reaction layers at semiconductor interfaces, and may also be used for measurements of free charge carriers in the space-charge region and in surface states. Results of such investigations are given in this article.