Degradation of ZnS:Cu,Al,Au phosphor powder in different gas mixtures

The ZnS:Cu,Al,Au (P22G) phosphor powder was bombarded by an electron beam in an O₂ ambient, Ar ambient and other mixture of gases. These gases consisted of mixtures of O₂ and CO_x, and O₂, CO_x and Ar gas. Auger electron spectroscopy (AES) was used to monitor changes in the surface composition of the P22G phosphor during electron bombardment. When the P22G phosphor powder was exposed to the electron beam in a water-rich O₂ ambient, a chemically limited ZnO layer was formed on the surface. The electron beam degradation of the P22G phosphor powder was also performed in a dry O₂ ambient and a layer of ZnSO₄ was formed on the surface. The ZnSO₄ formation decayed exponentially with time and it is postulated that this was due to the diffusion of the charge reactants through the ZnSO₄ film to the reaction interfaces. The P22G phosphor exposed to the electron beam in an Ar ambient and to the other gas mixtures degraded at a lower rate than in the case of the O₂ ambient. This suggests that Ar and CO_x may suppress the degradation of the P22G phosphor powder.     

Vibration analysis of a beam with PCLD Patch

An analytical approach for vibration response analysis of a beam with single passive constrained layer damping (PCLD) patch is presented. The governing equation of motion of the beam is firstly derived on the basis of an energy approach and the Lagrange equation. The noval contribution is that a third admissible function is introduced to represent the longitudinal displacements of the constraining layer in the PCLD patch when the assumed-modes method is applied for discretizing the governing equation. In conventional analytical approaches, only two admissible functions are used together with a longitudinal static equilibrium equation of a section of base beam or constraining layer. Comparison of the computational results from the proposed analytical approach and the conventional analytical approach as well as a commercial FEM code reveals that the proposed analytical approach can describe the vibration responses of the damped beam more accurately for commonly used viscoelastic material (VEM) layer in the PCLD patch while the conventional analytical approach, in general, overestimates the damping effects of the PCLD patch. The advantages and disadvantages of the proposed analytical approach and conventional analytical approach are discussed through some case studies.     

T-duality in Affine NA Toda Models

The construction of non-Abelian affine Toda models is discussed in terms of its underlying Lie algebraic structure. It is shown that a subclass of such non-conformal two-dimensional integrable models naturally leads to the construction of a pair of actions, which share the same spectra and are related by canonical transformations.     

Steady-state analytical solutions for the lattice boltzmann equation

A general class of analytical solutions of the lattice Boltzmann equation is derived for two-dimensional, steady-state unidirectional flows. A subset of the solutions that verifies the corresponding Navier-Stokes equations is given. It is pointed out that this class includes, e.g., the Couette and the Poiseuille flow but not, e.g., the basic Kolmogorov flow. For steady-state non-unidirectional flows, first and second order solutions of the lattice Boltzmann equation are derived. Practical consequences of the analysis are mentioned. Differences between the technique applied here and those used in some earlier works are emphasized.     

Mössbauer Study of Ceramic Finds from the Galería de las Ofrendas, Chavín de Huántar

Ceramic finds from the Galería de las Ofrendas at Chavín de Huántar and surface finds from the settlement of Chavín were characterised by combining the results of archaeological typology with archaeometric studies using neutron activation analysis, Mössbauer spectroscopy, X-ray diffraction and thin-section microscopy. Sherds from the pyramid Tello are included in the study as representative of local material. The analyses show that the vessels were made from different raw materials and that different firing procedures were used in their production. Sherds of certain styles largely exhibit similar types of Mössbauer patterns and in many instances also have similar element compositions. This supports the archaeological notion that the vessels were brought to Chavín from the provinces, perhaps on the occasion of a festivity.     

Photoproduction of mesons on the nucleon

Experimental studies of the photomeson production on the nucleon provide an abundant amount of data to address key issues of its structure. Depending on the selected channels and kinematics, different aspects can be investigated. The measurements of charged channels at low t constitute a large part of the cross section and exhibit a special sensitivity of the meson cloud. These contributions can be strongly suppressed by using a polarized beam and target. Instead, the excitation of resonances are emphasized in this case. The choice of neutral channels in the final state shows also dominant sensitivities for resonance excitation. The sequential decay of resonances can be studied systematically for the first time.     

Time-resolved electron transport studies on InGaAs/GaAs-QWIPs

Due to the short internal response time, quantum-well infrared photodetectors (QWIPs) are interesting for high-speed applications such as heterodyne spectroscopy or laser pulse monitoring. We studied the photocurrent transients of InGaAs/GaAs-QWIPs after irradiation with infrared laser pulses of 250 fs duration. The excitation wavelength of about 9 μm matches the peak wavelength of the QWIP structure. The photocurrent transient consists of two different dynamical components, representing the fast photoionization in the quantum-wells and the slow injection current that compensates the remaining space charge. The investigations of the different components as a function of temperature and bias voltage were performed on a nanosecond time-scale. The experimental separation of the two photocurrent contributions allows us to determine the photoconductive gain. The Fourier transform of the photocurrent transient was compared with other experimental methods including heterodyne detection and microwave rectification. The quantitative agreement between these different measurement techniques is excellent.     

Viscoelastic properties of nanostructured natural rubber/polystyrene interpenetrating polymer networks

The effects of the blend ratio and initiating system on the viscoelastic properties of nanostructured natural rubber/polystyrene‐based interpenetrating polymer networks (IPNs) were investigated in the temperature range of ?80 to 150 °C. The studies were carried out at different frequencies (100, 50, 10, 1, and 0.1 Hz), and their effects on the damping and storage and loss moduli were analyzed. In all cases, tan δ and the storage and loss moduli showed two distinct transitions corresponding to natural rubber and polystyrene phases, which indicated that the system was not miscible on the molecular level. However, a slight inward shift was observed in the IPNs, with respect to the glass‐transition temperatures (T_g's) of the virgin polymers, showing a certain degree of miscibility or intermixing between the two phases. When the frequency increased from 0.1 to 100 Hz, the T_g values showed a positive shift in all cases. In a comparison of the three initiating systems (dicumyl peroxide, benzoyl peroxide, and azobisisobutyronitrile), the dicumyl peroxide system showed the highest modulus. The morphology of the IPNs was analyzed with transmission electron microscopy. The micrographs indicated that the system was nanostructured. An attempt was made to relate the viscoelastic behavior to the morphology of the IPNs. Various models, such as the series, parallel, Halpin–Tsai, Kerner, Coran, Takayanagi, and Davies models, were used to model the viscoelastic data. The area under the linear loss modulus curve was larger than that obtained by group contribution analysis; this showed that the damping was influenced by the phase morphology, dual‐phase continuity, and crosslinking of the phases. Finally, the homogeneity of the system was further evaluated with Cole–Cole analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1680–1696, 2003