Laser induced copper electroless plating on polyimide with Q-switch Nd:YAG laser

The results of laser induced deposition of copper on polyimide substrate from copper electrolyte solution are reported. Unlike most work reported in the literatures where CW Ar⁺ lasers were used, a second harmonic (532 nm wavelength) Q-switch Nd:YAG laser was used for our experiments. The deposition process was conducted by laser-catalyzing of the polyimide surface and subsequent photothermal-accelerated reduction of copper-complex ions in an alkaline reducing environment. The characteristics of the deposited copper line were investigated in terms of laser beam scanning speed, and the number of scans. The surface morphology and chemical composition of the deposited copper were analyzed using field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDX). The optimum processing conditions have been identified. The copper deposit was found to adhere well to the substrate.     

Dynamical Characteristics of Traveling Wave Packets of Total Electron Content Disturbances

Using the COPHASE method and the GPS interferometry method for travelling ionospheric disturbances, we analyze in detail the spatio-temporal properties of travelling wave packets (TWP) of total electron content (TEC) disturbances. The analysis is performed on the example of a clearest TWP manifestation observed in California, USA, in October 18, 2001, using the GLOBDET technique, developed at the Institute of Solar-Terrestrial Physics of the Siberian Branch of RAS for global detection and monitoring of natural and technogenic ionospheric disturbances on the basis of TEC variations retrieved from the global network of GPS receivers. In the time domain, TWPs are quasi-periodic TEC oscillations of duration about 1 h, period of 10–20 min, and amplitude exceeding that of the background TEC fluctuations by at least one order of magnitude. The velocity and direction of TWP motion are similar to those of mid-latitude mesoscale travelling ionospheric disturbances, as obtained earlier from the analysis of phase parameters of HF radio signals and the signals of geostationary satellites and discrete space radio sources.     

A Modified Quasi-Newton Method for Structured Optimization with Partial Information on the Hessian

This paper develops a modified quasi-Newton method for structured unconstrained optimization with partial information on the Hessian, based on a better approximation to the Hessian in current search direction. The new approximation is decided by both function values and gradients at the last two iterations unlike the original one which only uses the gradients at the last two iterations. The modified method owns local and superlinear convergence. Numerical experiments show that the proposed method is encouraging comparing with the methods proposed in [4] for structured unconstrained optimization Presented at the 6th International Conference on Optimization: Techniques and Applications, Ballarat, Australia, December 9–11, 2004     

Optical background measurement in a potential site for the NEMO KM undersea neutrino telescope

We describe the measurement of the deep sea optical background in some sites south of Capo Passero, Sicily. A continuous flux of about 440 photons cm ^-2 s ^-1 in the wavelength interval 440-550 nm is estimated due to the decays of the ⁴⁰K contained in the sea water. Bioluminescence light bursts are also observed and an example of time evolution is reported. All the measurements were accomplished using a deep sea module also described in this article. Received: 20 April 2002 / Published online: 26 July 2002     

On mechanical characteristics of nanocrystals

The dependence of the elastic moduli of a nanocrystal on its size is investigated theoretically with reference to a two-dimensional single-crystal strip. It is shown that the uncertainty (of a fundamental nature) in the size of a nanocrystal causes the determination of many of its mechanical characteristics to be ambiguous. It is found that the Cauchy-Green relations are modified and the elastic-constant tensor ceases to be symmetric; the size and shape of a nanocrystal render its mechanical properties more anisotropic. For a single-crystal strip, the Poisson ratio decreases and the Young modulus increases with decreasing thickness of the strip; in the case of a very thin crystal film (two atomic layers thick), these elastic moduli can differ from their macroscopic values by a factor of two. The size effects which make the continuum elasticity theory inapplicable to nanocrystals are estimated. The size effects that occur when the molecular dynamics method is applied for modeling macroscopic objects are also discussed.     

Forward-angle yields of 2≤Z≤11 isotopes in the reaction of 18O(35A MeV) with 9Be

A systematic investigation of the forward-angle inclusive yields of 2≤Z≤11 isotopes produced in collisions of ¹⁸O projectile nuclei with a ⁹Be target in the Fermi energy region (35A MeV) is performed. The measurements were based on the use of the COMBAS double achromatic kinematical separator in the spectrometry mode at the Flerov Laboratory of Nuclear Reactions at the Joint Institute for Nuclear Research, FLNR (JINR, Dubna). The velocity, isotopic, and element distributions are presented. There is no unique mechanism that would explain the total set of results obtained in this experiment. A dominant role of low-energy reaction mechanisms is observed. The intensity of secondary beams of halolike nuclei ¹¹Li, ¹²Be, and ¹⁴Be is determined.     

Time delay as a key to apoptosis induction in the p53 network

A feedback mechanism that involves the proteins p53 and mdm2, induces cell death as a controlled response to severe DNA damage. A minimal model for this mechanism demonstrates that the response may be dynamic and connected with the time needed to translate the mdm2 protein. The response takes place if the dissociation constant k between p53 and mdm2 varies from its normal value. Although it is widely believed that it is an increase in k that triggers the response, we show that the experimental behaviour is better described by a decrease in the dissociation constant. The response is quite robust upon changes in the parameters of the system, as required by any control mechanism, except for few weak points, which could be connected with the onset of cancer. Received 8 May 2002 / Received in final form 9 July 2002 Published online 17 September 2002     

ω-meson photoproduction on nucleons in the near-threshold region

The European Physical Journal A - The ω-meson photoproduction, γ + p→p + ω, is studied in the framework of a model, containing π-meson exchange in t-channel and...     

Segregation in the Falicov--Kimball Model

The Falicov–Kimball model is a simple quantum lattice model that describes light and heavy electrons interacting with an on-site repulsion; alternatively, it is a model of itinerant electrons and fixed nuclei. It can be seen as a simplification of the Hubbard model; by neglecting the kinetic (hopping) energy of the spin up particles, one gets the Falicov–Kimball model. We show that away from half-filling, i.e. if the sum of the densities of both kinds of particles differs from 1, the particles segregate at zero temperature and for large enough repulsion. In the language of the Hubbard model, this means creating two regions with a positive and a negative magnetization. Our key mathematical results are lower and upper bounds for the sum of the lowest eigenvalues of the discrete Laplace operator in an arbitrary domain, with Dirichlet boundary conditions. The lower bound consists of a bulk term, independent of the shape of the domain, and of a term proportional to the boundary. Therefore, one lowers the kinetic energy of the itinerant particles by choosing a domain with a small boundary. For the Falicov- Kimball model, this corresponds to having a single “compact” domain that has no heavy particles. Received: 21 June 2001 / Accepted: 4 January 2002