A Noninvasive, on Wafer Method to Determine the Intrinsic Stress of a Polymer Layer

The method described in this paper allows an investigator to determine the intrinsic stress of a polymer layer in a way that does not result in damage to devices or test structures. The method requires that a small area of the polymer be released from the substrate to form a diaphragm. The diaphragm is stimulated with acoustic white noise and the diaphragm movement is monitored with a laser vibrometer. The first few resonance frequencies of the diaphragm are obtained using a laser vibrometer and then those frequencies are used to calculate the membrane intrinsic bi-axial tension.     

De-mixing dynamics of a binary liquid system in a controlled-pore glass

The European Physical Journal E - The temperature-induced microphase separation of the binary liquid system iso-butyric acid+heavy water (iBA + D2O) in a mesoporous silica glass (CPG-10-75) of...     

Analysis of tunable diode-laser spectra of Q(J,0) lines in CH3F near 1475 cm using a multispectrum fitting technique

We have analyzed the methyl fluoride ^RQ(J,0)Q branch lines located near 1475 cm⁻¹ using a simultaneous multi-spectrum fitting technique. In this analysis we have used previously recorded diode-laser data in which we collected many data points covering only one or two Q branch lines in a particular run. The analysis consists of simultaneously fitting 57 spectra collected with numerous pressure and path length conditions for all absorption lines. The data are concatenated to create one continuous spectrum of the Q branch. We have determined the intensity and self-broadened widths at 296 K for 23 ^RQ(J,0) lines.     

Lattice vibrations of armchair carbon nanotubes: phonons,soliton deformations and lattice discreteness effects

Small and large-amplitude elastic deformations of the armchair structure of single-walled carbon nanotubes are investigated with emphasis on the cylindrical geometry. As starting model, we consider a discrete one-dimensional lattice of atoms interacting via a Lennard-Jones type two-body potential. In an expansion scheme using cylindrical coordinates where radial displacements are assumed negligible compared to the angular motions, a sine-lattice Hamiltonian is derived. In the limit of small-amplitude angular displacements, the dispersion spectrum of acoustic phonons is derived and the associate characteristic frequency is given as a function of parameters of the model. In the large-amplitude regime, lattice vibrations give rise to kink-type deformations which move undergoing lattice dispersion and lattice discreteness effects. The dispersion law of the kink motion is obtained and shown to lower the effect of lattice discreteness, giving rise to a vanishing Peierls stress for kink sizes of the order of a few lattice spacings. Implications of the coupling of two armchair structures on the stability of vibrational modes of an individual armchair nanotube are also discussed. A gap of forbidden modes is predicted in the phonon spectrum while the energy needed to create a kink deformation in individual nanotubes is shifted in the presence of a wall-to-wall interaction.Received: 2 August 2004, Published online: 14 December 2004PACS: 81.07.De Nanotubes - 62.30. + d Mechanical and elastic waves-vibrations - 63.22. + m Phonons in low-dimensional nanoscale materials - 63.20.Ry Anharmonic lattices modes     

Naphthyl azomesogens with lateral chloro groups

A homologous series of azomesogens, 2″-[4-(4′-n-alkoxybenzoyloxy)-2-chlorophenylazo] naphthalenes, with lateral chloro groups was synthesised. All the homologues synthesized exhibit enantiotropic nematic mesophase. The mesomorphic properties of the present series are compared with other structurally related series to evaluate the effect of lateral chloro group and its position on mesomorphism This paper was presented at the 10th National Conference on Liquid Crystals held at Bangalore, India during 9–11 October 2003.     

A solvent-free synthesis of coumarins using a Wells-Dawson heteropolyacid as catalyst

Substituted coumarins are synthesized from phenols and β-ketoesters by the Pechmann reaction, using a Wells-Dawson heteropolyacid (H₆P₂W₁₈O₆₂·24H₂O) as catalyst by a solvent-free procedure. This one requires low reaction times, 130 °C temperature and as little as 1 mol % of Wells-Dawson acid, obtaining good to excellent yields of coumarins. The catalyst showed to be reusable with no differences in the yields. The results are compared with those of the reactions performed in toluene solution. The presented synthetic procedure is a convenient, clean and fast alternative for synthesizing 4-substituted coumarins (17 examples).     

Unavoidable Traces Of Set Systems

Sauer, Shelah, Vapnik and Chervonenkis proved that if a set system on n vertices contains many sets, then the set system has full trace on a large set. Although the restriction on the size of the groundset cannot be lifted, Frankl and Pach found a trace structure that is guaranteed to occur in uniform set systems even if we do not bound the size of the groundset. In this note we shall give three sequences of structures such that every set system consisting of sufficiently many sets contains at least one of these structures with many sets.     

Cochran's statistical theorem for outer inverses of matrices and matrix quadratic forms

We extend the matrix version of Cochran's statistical theorem to outer inverses of a matrix. As applications, we investigate the Wishartness and independence of matrix quadratic forms for Kronecker product covariance structures.     

Development of a quantitative FI-MS technique for the characterization of high- and nonboiling saturated hydrocarbon mixtures

Summary Using a saturated non-boiling hydrocarbon mixture, the influence of two parameters on the results of field ionization mass spectrometry (FI-MS) measurements was studied: (a) the potential difference between the FI emitter and the counterelectrode; (b) the emitter temperature.Variation of the potential difference had only a minor effect on the average molecular mass measured and had no evident effect on the relative ring number distribution in the sample. In contrast, when the emitter temperature was increased, higher average molecular masses were recorded. Moreover, the average molecular masses shifted to higher ring numbers. In order to control the relationship between the described influences during mixture analysis, measuring instructions have been developed that enable the quantitative analysis of unknown saturated samples. However, average molecular mass of the mixture must be known.

---

Entwicklung einer quantitativen FI-MS-Methode zur Charakterisierung von gesättigten hoch- und nichtsiedenden Kohlenwasserstoffgemischen

     

Bulk and microprobe analysis for trace elements with synchrotron radiation

Blood serum samples were irradiated by monochromatic synchrotron radiation (15 keV) and by 2.4-MeV protons to compare their performance for the detection of trace elements by x-ray fluorescence (XRF) spectrometry. Absolute concentration assignment was based on the addition of an internal standard and on a method which uses the incoherent and coherent radiation as a flux monitor of the incoming beam. Preliminary experiments with a synchrotron XRF microprobe are reported.