The mass spectral fragmentation of 1,4-butanediol

The behaviour of 1,4-butanediol under electron impact at 70 and 12.5 eV has been studied with the aid of high resolution mass spectra. Based on metastable ion decompositions and deuterium labelling, mechanisms are proposed for the formation of the abundant ions of this compound.     

Coordination properties of a diarylaza crown ether appended with a luminescent [Ru(bipy)3]2+ unit

The [Ru(bipy)(2)(1)](PF(6))(2) (bipy refers to 2,2'-bipyridine) complex, comprising a ruthenium(II) tris(2,2'-bipyridine) luminophore covalently linked to a di[(o-triethyleneglycoxy)phenyl]amine crown ether 1, has been synthesized and fully characterized. The photophysical properties of this metal complex have been examined in solution at ambient temperature. Luminescence from the metal complex is enhanced significantly in the presence of various adventitious cations, including protons. In particular, Li(+) cations bind to the crown ether, as evidenced by (1)H NMR and luminescence spectroscopy. Cation binding serves to decrease the rate of reductive quenching of the triplet state of the metal complex, thereby increasing the extent of luminescence. The solution-phase conformation of [Ru(bipy)(2)(1)](PF(6))(2), with and without encapsulated Li(+), has been examined by 2-D NMR and by molecular dynamics simulations.     

Etude des propriétés cristallographiques,diélectriques et d'optique non linéaire de quelques nouvelles phases de composition BaxLi5−2xNb5(1−y)Ta5yO15 et de structure bronzes oxygénés de tungstène quadratiques

Two series of phases with tetragonal bronze-like structure and composition Ba_xLi_5?2xT₅O₁₅ (T = Nb, Ta) have been isolated in the systems BaNb₂O₆LiNbO₃ and BaTa₂O₆LiTaO₃. All these phases show ferroelectric-paraelectric transitions. The Curie temperature increases with the lithium content. The value of T_C for Ba_2.03Li_0.94Nb₅O₁₅ is the highest ever observed for this type of structure: the obtained phases are potentially good materials for the harmonic generation of the 0.53-μm radiation. The optical yield of the niobate Ba_2.14Li_0.71Nb₅O₁₅ is about 2.5 times that of Ba₂NaNb₅O₁₅ and 250 times that of the K.D.P. The crystallographic and dielectric data of the system Ba_2.14Li_0.71Nb₅O₁₅Ba_2.14Li_0.71Ta₅O₁₅ characterize three domains, which are respectively antiferroelectric, ferroelectric, and paraelectric. The Curie temperature and the optical yield decrease with increasing tantalum content.     

Regioselective oxygenative tetraamination of [60]fullerene. Fullerene-mediated reduction of molecular oxygen by amine via ground state single electron transfer in dimethyl sulfoxide

The reaction of [60]fullerene with a variety of a secondary aliphatic amines in 20% v/v dimethyl sulfoxide in chlorobenzene under an atmospheric pressure of molecular oxygen allows regioselective introduction of four amino groups and one epoxide group around one pentagon of the fullerene molecule in good to high yield. This new synthesis of tetraaminofullerene expoxide can be carried out with a simple procedure on a multigram scale at room temperature and affords a variety of functionalized fullerene derivatives. Near-infrared analysis of a mixture of [60]fullerene and piperidine in a deaerated dimethyl sulfoxide/chlorobenzene mixture indicated equilibrium formation of [60]fullerene radical anion (C60*-) that persists at least for 2 weeks at room temperature but reacts immediately with molecular oxygen to give the tetraaminofullerene expoxide. The Benesi-Hildebrand analysis of the concentration dependency of the near-infrared absorption indicated that a [C60*- piperidine*+] radical ion pair is formed with an equivalent constant of K = 0.62 +/- 0.02 M(-1) at 25 degrees C. This and other lines of evidence suggest that the oxygenative amination reaction involves C60-mediated reduction of molecular oxygen by the amine.     

Characterization of metabolites of Celecoxib in rabbits by liquid chromatography/tandem mass spectrometry

The metabolism of the anti-inflammatory drug Celecoxib in rabbits was characterized using liquid chromatography (LC)/tandem mass spectrometry (MS/MS) with precursor ion and constant neutral loss scans followed by product ion scans. After separation by on-line liquid chromatography, the crude urine samples and plasma and fecal extracts were analyzed with turbo-ionspray ionization in negative ion mode using a precursor ion scan of m/z 69 (CF(3)) and a neutral loss scan of 176 (dehydroglucuronic acid). The subsequent product ion scans of the [M - H] ions of these metabolites yielded the identification of three phase I and four phase II metabolites. The phase I metabolites had hydroxylations at the methyl group or on the phenyl ring of Celecoxib, and the subsequent oxidation product of the hydroxymethyl metabolite formed the carboxylic acid metabolite. The phase II metabolites included four positional isomers of acyl glucuronide conjugates of the carboxylic acid metabolite. These positional isomers were caused by the alkaline pH of the rabbit urine and were not found in rabbit plasma. The chemical structures of the metabolites were characterized by interpretation of their product ion spectra and comparison of their LC retention times and the product ion spectra with those of the authentic synthesized standards.     

Photophysical and structural impact of phosphorylated anions associated to lanthanide complexes in water

A new ligand, LC, bis-[(6'-carboxy-2,2'-bipyridine-6-yl)]phenylphosphine oxide, in which the tridentate 6-carboxy-2,2'-bipyridyl arms are directly linked to a phenylphosphine oxide fragment, has been synthesized. The corresponding [Ln.LC]Cl.xH2O complexes (Ln = Eu, x = 4, and Tb, x = 3) were isolated from solutions containing equimolar amounts of LC and hydrated LnCl3 salts and characterized by elemental analysis, mass spectrometry, and infrared spectroscopy. The interactions of the Eu complex with various anions (AMP(2-), ADP3-, ATP,4- HPO4(2-), and NO3-) were studied by titration experiments, using UV-vis, luminescence spectroscopy, and excited-state lifetime measurements. The results are in keeping with strong interactions with the ADP3-, ATP4-, and phosphate anions in TRIS/HCl buffer (0.01 M, pH = 7.0), as revealed by the determination of the conditional stepwise association constants. These values are higher than the one determined for ligand LB, bis[(6'-carboxy-2,2'-bipyridine-6-methyl-yl)]-n-butylamine (Delta log K approximately 1-2). The interaction of complexes [Ln.LB]+ and [Ln.LC]+ with nitrate, monohydrogenophosphate, methyl phosphate (MeP2-), methyldiphosphate (MeDP3-), and methyltriphosphate (MeTP4-) anions was investigated by means of quantum mechanical (QM) calculations. The results, combined with data on the photophysical impact of the sequential competitive binding of anions to the Eu complexes in water, suggest that LB is too flexible to ensure a good coordination pocket, while the molecular structure of ligand LC stabilizes both the formation of the lanthanide complexes and its adducts with ATP.     

Sterically and electrosterically stabilized emulsion polymerization. Kinetics and preparation

The principal subject discussed in the current paper is the radical polymerization in the aqueous emulsions of unsaturated monomers (styrene, alkyl (meth)acrylates, etc.) stabilized by non-ionic and ionic/non-ionic emulsifiers. The sterically and electrosterically stabilized emulsion polymerization is a classical method which allows to prepare polymer lattices with large particles and a narrow particle size distribution. In spite of the similarities between electrostatically and sterically stabilized emulsion polymerizations, there are large differences in the polymerization rate, particle size and nucleation mode due to varying solubility of emulsifiers in oil and water phases, micelle sizes and thickness of the interfacial layer at the particle surface. The well-known Smith-Ewart theory mostly applicable for ionic emulsifier, predicts that the number of particles nucleated is proportional to the concentration of emulsifier up to 0.6. The thin interfacial layer at the particle surface, the large surface area of relatively small polymer particles and high stability of small particles lead to rapid polymerization. In the sterically stabilized emulsion polymerization the reaction order is significantly above 0.6. This was ascribed to limited flocculation of polymer particles at low concentration of emulsifier, due to preferential location of emulsifier in the monomer phase. Polymerization in the large particles deviates from the zero-one approach but the pseudo-bulk kinetics can be operative. The thick interfacial layer can act as a barrier for entering radicals due to which the radical entry efficiency and also the rate of polymerization are depressed. The high oil-solubility of non-ionic emulsifier decreases the initial micellar amount of emulsifier available for particle nucleation, which induces non-stationary state polymerization. The continuous release of emulsifier from the monomer phase and dismantling of the non-micellar aggregates maintained a high level of free emulsifier for additional nucleation. In the mixed ionic/non-ionic emulsifiers, the released non-ionic emulsifier can displace the ionic emulsifier at the particle surface, which then takes part in additional nucleation. The non-stationary state polymerization can be induced by the addition of a small amount of ionic emulsifier or the incorporation of ionic groups onto the particle surface. Considering the ionic sites as no-adsorption sites, the equilibrium adsorption layer can be thought of as consisting of a uniform coverage with holes. The de-organization of the interfacial layer can be increased by interparticle interaction via extended PEO chains--a bridging flocculation mechanism. The low overall activation energy for the sterically stabilized emulsion polymerization resulted from a decreased barrier for entering radicals at high temperature and increased particle flocculation.     

A family of single-isomer,sulfated gamma-cyclodextrin chiral resolving agents for capillary electrophoresis: octa(6-O-sulfo)-gamma-cyclodextrin

The second member of the single-isomer, sulfated gamma-cyclodextrin family, the sodium salt of octa(6-O-sulfo)-gamma-cyclodextrin (OS) has been synthesized, characterized and used to separate the enantiomers of nonelectrolyte, acidic, basic, and ampholytic analytes by capillary electrophoresis in acidic aqueous background electrolytes. The anionic effective mobilities of the nonelectrolyte and anionic analytes increased with increasing concentration of OS. The effective mobilities of strongly complexing cationic analytes became anionic with very low OS concentrations and passed local anionic effective mobility maxima as the OS concentration, and along with it, the ionic strength, of the background electrolyte increased. The effective mobilities of the weakly binding cationic analytes became only slightly anionic at high OS concentration values and did not show the local anionic effective mobility maxima. For nonelectrolyte analytes, separation selectivities decreased with increasing OS concentration. For cationic analytes, separation selectivities were highest where the effective mobilities of the less mobile enantiomers approached zero. OS proved to be a broadly applicable chiral resolving agent.     

Capillary electrophoretic chiral separations using cyclodextrin additives: III. Peak resolution surfaces for ibuprofen and homatropine as a function of the pH and the concentration of β-cyclodextrin

Our recent extended peak resolution equation of capillary electrophoresis has been combined with the multiple equilibria-based electrophoretic mobility model of chiral separations to describe peak resolution as a function of the composition of the background electrolyte (pH and the β-cyclodextrin concentration) and a function of the operating variables (effective portion of the applied potential, dimensionless electroosmotic flow coefficient). Using the previously determined model parameters, the resolution surfaces were calculated for a Type I chiral separation (ibuprofen), and a Type III chiral separation (homatropine). In Type I separations resolution can be obtained only over a narrow pH range in the vicinity of the pK_a value, and above a minimum value, the concentration of β-cyclodextrin plays a lesser role. In Type III separations, the pH- and β-cyclodextrin concentration-dependent resolution surface has two lobes, on which the migration order of the enantiomers is opposite. This can be an advantage in trace component analysis. In both Type I and Type III separations, peak resolution varies strongly with the dimensionless electroosmotic flow coefficient when its value is changed in the − 1 to 1 range. The loci of the pH-dependent and the β-cyclodextrin concentration-dependent resolution maxima do not shift significantly when the dimensionless electroosmotic flow coefficient is changed. This fact provides the analyst with an additional resolution enhancement tool that does not alter the selectivity of the separation. The utility of the model and its theoretical predictions has been demonstrated by comparing measured and calculated R_s values for ibuprofen and homatropine.     

Extraction of plasmid DNA from Escherichia coli cell lysate in a thermoseparating aqueous two-phase system

The primary purification of a 6.1 kilo base pair (kbp) plasmid from a desalted alkaline lysate has been accomplished by a thermoseparating aqueous two-phase system [(50% ethylene oxide-50% propylene oxide)-Dextran T 500]. The partitioning of the different nucleic acids (plasmid DNA, RNA, genomic DNA) in the thermoseparating aqueous two-phase system was followed both qualitatively by agarose gel electrophoresis and quantitatively by analytical chromatography (size exclusion- and anion-exchange mode) and PicoGreen fluorescence analysis. The experimental results showed a complete recovery of the plasmid DNA to the top phase, while 80% of total RNA and 58% of total protein was discarded to the bottom phase. Moreover, a 3.8-fold volume reduction of the plasmid DNA solution was achieved. By using a final thermoseparating step, the EO50PO50 polymer could be efficiently recycled, resulting in plasmid solution containing less than 1% polymer. The developed thermoseparating aqueous two-phase system shows great potential for the large-scale processing of plasmid DNA.