Gold(III) π-Allyl Complexes

Gold(III) π-complexes have been authenticated recently with alkenes, alkynes, and arenes. The key importance of Pd^II π-allyl complexes in organometallic chemistry (Tsuji–Trost reaction) prompted us to explore gold(III) π-allyl complexes, which have remained elusive so far. The (P,C)Au^III(allyl) and (methallyl) complexes 3 and 3′ were readily prepared and isolated as thermally and air-stable solids. Spectroscopic and crystallographic analyses combined with detailed DFT calculations support tight quasi-symmetric η³-coordination of the allyl moiety. The π-allyl gold(III) complexes are activated towards nucleophilic additions, as substantiated with β-diketo enolates.     

Synthesis of new guanidine derivatives from 2′,3′,4′,9′-tetrahydrospiro[piperidine-4,1′-[1H]pyrido[3,4-b]indole]

The reaction of the isothiourea derivative 2 with methylaminc or pyrrolidine resulted in guanidines 3a-3b . Using hydrazine under the same conditions the tetrazole derivative 4 was obtained. On reacting 2 with piperidine, morpholine, methylhydrazine, phenylhydrazine, hydroxylamine or sodium hydroxide, cycliza-tion took place leading to the novel 4-cyanimino-1,2,3,4,6,7,12,12b-octahydro-3,12b-ethanopyrim-ido[1′,6′:1,2]pyrido[3,4-b]indole ( 5 ). Some structural aspects of 5 and other model compounds were analysed mainly by ¹³C nmr spectroscopy.     

Utilization of IR spectral detailed analysis for coordination mode determination in novel Zn-cyclen-aminoacid complexes

The infrared spectra, elemental and thermal (TG/DTG and DTA) analyses of novel [Zn(cyclen-κ4N1,4,7,10)(HGly-κ2O,O')](ClO4)2 (1), and [Zn2(cyclen-κ4N1,4,7,10)2(μ-S-Ala-κ2N,O)](ClO4)(3)·2H2O (2) complexes (cyclen - 1,4,7,10-tetraazacyclododecane) were recorded and analyzed in the relation to their structural peculiarities. IR spectral data indicate both mono- or bidentate coordination mode of a carboxylate group in the prepared complexes (at pH≈9). The results indicate unusual bidentate carboxylate coordination mode (in complex (1)) toward to Zn2+-cyclen unit. Therefore the crystal structure determination of the crystalline complex [Zn(cyclen-κ4N1,4,7,10)(NO3-κ2O,O')](NO3) was attached in order to support the coordination mode assignment in complex (1).     

Molecular structure of ethynylbenzene from electron diffraction and ab initio molecular orbital calculations

The molecular structure and benzene ring distortions of ethynylbenzene have been investigated by gas-phase electron diffraction and ab initio MO calculations at the HF/6-31G^* and 6-3G^** levels. Least-squares refinement of a model withC _2v, symmetry, with constraints from the MO calculations, yielded the following important bond distances and angles:r _g(C _i -C _o )=1.407±0.003 Å,r _g(C _o -C _m )=1.397±0.003 Å,r _g(C _m -C _p )=1.400±0.003 Å,r _g(Cr _i -CCH)=1.436 ±0.004 Å,r _g(C=C)=1.205±0.005 Å, C _o -C _i -C _o =119.8±0.4°. The deformation of the benzene ring of ethynylbenzene given by the MO calculations, including o-C_i-C_o=119.4°, is insensitive to the basis set used and agrees with that obtained by low-temperature X-ray crystallography for the phenylethynyl fragment, C₆H₅-CC-, in two different crystal environments. The partial substitution structure of ethynylbenzene from microwave spectroscopy is shown to be inaccurate in the ipso region of the benzene ring.     

Composition depth profile analysis of electrodeposited alloys and metal multilayers: the reverse approach

The reverse depth profile analysis is a recently developed method for the study of a deposit composition profile in the near-substrate zone. The sample preparation technique enables one to separate the deposit and a thin cover layer from its substrate, and the initial roughness of the sample is much smaller than in the conventional sputtering direction. This technique is particularly suitable to study the zones being formed in the early phase of the electrodeposition of alloys. It has been demonstrated with the reverse depth profile analysis that in many cases when one component of an alloy is preferentially deposited, an initial zone is formed that is rich in the preferentially deposited component. This phenomenon is demonstrated for Ni–Cd, Ni–Sn, Fe–Co–Ni, Co–Ni, and Co–Ni–Cu alloys. The composition change is confined to the initial 150-nm-thick deposit, and it is the result of the interplay of the deposition preference and the depletion of the electrolyte near the cathode with respect to the ion reduced preferentially. The reverse depth profile analysis made it possible to compare the measured and the calculated composition depth profile of electrodeposited multilayers. It has been shown that the decay in the composition oscillation intensity in Co/Cu multilayers with the increase of the sputtering depth can be derived from the roughness measured as a function of the deposit thickness.     

Trajectory surface hopping study of the O(3P) + ethylene reaction dynamics

Spin-orbit coupling (SOC) induced intersystem crossing (ISC) has long been believed to play a crucial role in determining the product distributions in the O(3P) + C2H4 reaction. In this paper, we present the first nonadiabatic dynamics study of the title reaction at two center-of-mass collision energies: 0.56 eV, which is barely above the H-atom abstraction barrier on the triplet surface, and 3.0 eV, which is in the hyperthermal regime. The calculations were performed using a quasiclassical trajectory surface hopping (TSH) method with the potential energy surface generated on the fly at the unrestricted B3LYP/6-31G(d,p) level of theory. To simplify our calculations, nonadiabatic transitions were only considered when the singlet surface intersects the triplet surface. At the crossing points, Landau-Zener transition probabilities were computed assuming a fixed spin-orbit coupling parameter, which was taken to be 70 cm-1 in most calculations. Comparison with a recent crossed molecular beam experiment at 0.56 eV collision energy shows qualitative agreement as to the primary product branching ratios, with the CH3 + CHO and H + CH2CHO channels accounting for over 70% of total product formation. However, our direct dynamics TSH calculations overestimate ISC so that the total triplet/singlet ratio is 25:75, compared to the observed 43:57. Smaller values of SOC reduce ISC, resulting in better agreement with the experimental product relative yields; we demonstrate that these smaller SOC values are close to being consistent with estimates based on CASSCF calculations. As the collision energy increases, ISC becomes much less important and at 3.0 eV, the triplet to singlet branching ratio is 71:29. As a result, the triplet products CH2 + CH2O, H + CH2CHO and OH + C2H3 dominate over the singlet products CH3 + CHO, H2 + CH2CO, etc.     

Activation mechanism of the human histamine H4 receptor--an explicit membrane molecular dynamics simulation study

Molecular dynamics (MD) simulations in a membrane-embedded environment were carried out on the homology model of the human histamine H4 receptor (hH4R) alone and in complex with its endogenous activator histamine and with the first reported selective hH4R antagonist JNJ7777120. During the simulation of the histamine-hH4R complex, considerable changes occurred in the hH4R structure as well as in the interaction pattern of histamine at the binding site. These changes are in agreement with experimental data published on GPCR activation. In particular, the intracellular side of TM helix VI moved significantly away from TM helices III and VII. Moreover, histamine formed an interaction with Asn147 (4.57) that was previously proved to be important in hH4R activation. Results of the MD simulations of the native hH4R and the JNJ7777120-hH4R complex suggest that these models represent an inactive conformation of hH4R. MD simulation in the presence of JNJ7777120 resulted in the movement of the intracellular side of TM helix VI in the direction of TM helix III. Snapshots of the simulations may serve as functionally relevant models in the development of novel hH4R ligands in the future.     

Thermal stability of new zinc acetate-based complex compounds

New zinc acetate based complex compounds (of general formula Zn(CH₃COO)₂·1?2L·nH₂O) containing one or two molecules of urea, thiourea, coffeine and phenazone were prepared namely: Zn(CH₃COO)₂·2.5H₂O, Zn(CH₃COO)₂·2u·0.5H₂O, Zn(CH₃COO)₂·tu·0.5H₂O, Zn(CH₃COO)₂·2tu, Zn(CH₃COO)₂·cof·2.5H₂O, Zn(CH₃COO)₂·2cof·3.5H₂O, Zn(CH₃COO)₂·2phen·1.5H₂O. The compounds were characterized by IR spectroscopy, chemical analysis and thermal analysis. Thermal analysis showed that no changes in crystallographic modifications of the compounds take place during (heating in nitrogen before) the thermal decompositions. The temperature interval of the stability of the prepared compounds were determined. It was found that the thermal decomposition of hydrated compounds starts by the release of water molecules. During the thermal decomposition of anhydrous compounds in nitrogen the release of organic ligands take place followed by the decomposition of the acetate anion. Zinc oxide and metallic zinc were found as final products of the thermal decomposition of the zinc acetate based complex compounds studied. Carbon dioxide and acetone were detected in the gaseous products of the decomposition of the compounds if ZnO is formed. Carbon monoxide and acetaldehyde were detected in the gaseous products of the decomposition, if metallic Zn is formed. It is supposed that ZnO and Zn resulting from Zn acetate complex compounds here studied, possess different degree of structural disorder. Annealing takes place by further heating above 600°C.