Reversed-phase liquid chromatographic method for the determination of ochratoxin A in wine

In this paper, we propose a new, rapid, highly sensitive and reproducible RP-HPLC-FLD method for the detection of ochratoxin A (OTA) in wine, by directly injecting the liquid in the chromatographic system without any extraction or clean-up. An alkaline mobile phase (NH4Cl:CH-CN 85:15 (v/v), 20 mM, pH 9.8) was used to obtain a distinct fluorescence enhancement. This improvement allows to reach, without an immunoaffinity clean-up or concentration, a detection limit of 0.05 ng/ml, which is similar to those commonly obtained after immunoaffinity purification and acidic elution. The method was statistically validated and directly applied to a series of wine samples.     

Activity coefficients of binary methanol alcohol mixtures from cluster weighting

The hydrogen bond network of different small alcohols is investigated via cluster analysis. Methanol/alcohol mixtures are studied with increasing chain length and branching of the molecule. Those changes can play an important role in different fields, including solvent and metal extraction. The extended tight binding method GFN2-xTB allows the evaluation and geometry optimization of thousands of clusters built via a genetic algorithm. Interaction energies and geometries are evaluated and discussed for the neat systems. Thermodynamic properties, such as vaporization enthalpies and activity coefficients, are calculated with the binary quantum cluster equilibrium (bQCE) approach using our in-house code Peacemaker 2.8. Combined distribution functions of the distances against the angles of the hydrogen bonds are evaluated for neat and mixed clusters and weighted by the equilibrium populations achieved from bQCE calculations.     

Fluorescent cyclodextrins bearing metal binding sites and their use for chemo- and enantioselective sensing of amino acid derivatives

Ditopic receptors based on cyclodextrins bearing a metal binding site were used as enantioselective fluorescence sensors, which were able to generate different responses in the presence of d- or l-amino acids. The performances of the selectors as a function of their structure were evaluated, and the same analysis was extended to other analytes. In this work, this approach is used for the enantiomers of a series of amino acid derivatives and in particular of 2-aminocaprolactam. The results showed that the ability of these sensors to perform enantiomeric analysis can be extended to other analytes of interest in organic synthesis such as amino acid amides and α-aminolactams.     

Chiral separation of amino acids by copper(II) complexes of tetradentate diaminodiamido-type ligands added to the eluent in reversed-phase high-performance liquid chromatography: a ligand exchange mechanism

In this paper we report a study on the mechanism of the enantiomeric separation of unmodified D,L-amino acids in RP-HPLC by copper(II) complexes of two tetradentate diaminodiamido ligands, (S,S)-N,N'-bis(phenylalanyl)ethanediamine (PheNN-2) and (S,S)-N,N'-bis(methylphenylalanyl)ethanediamine (Me2PheNN-2), added to the eluent. The aim is to investigate whether and how a copper(II) complex with no free equatorial positions can perform chiral discrimination of bidentate analytes such as unmodified amino acids. The problem is approached in a systematic way by: (a) varying the different chromatographic parameters (pH, selector concentration, eluent polarity); (b) performing chiral separation with the selector adsorbed on the stationary phase; (c) studying the ternary complex formation of these ligands with D- and L-amino acids in solution by glass electrode potentiometry and electrospray ionization MS. All the experimental data are consistent with a mechanism of chiral recognition, based on ligand exchange, which involves as selectors the species [Cu2L2H(-2)]2+ and [CuLH(-2)] and proceeds by displacement of two binding sites from the equatorial positions, giving rise to the ternary species [CuLA]+ and [CuLH(-1) A]. The most important factor responsible for chiral discrimination seems to be the affinity of the diastereomeric ternary complexes for the stationary phase since no enantioselectivity is observed in solution.     

Insertion of isoprene units into indole and 3-substituted indoles in aqueous systems

Indole (1) and 3- methylbut - 2 - enyl bromide (2) were reacted in aqueous solution over a wide range of pH, in absence of Lewis catalysts, leading to 3-(3'-methylbut-2'-enyl) indole (3), 2,3-di-(3'-methylbut-2-enyl) indole (4) and to 2 - (3 - indolyl) - 3,3 - di - (3' - methylbut - 2' - enyl) - 2,3 - dihydroindote (6) in acidic buffer, whereas compound 6 was not formed at basic pH. Both the reactivity and the selectivity of the reaction appear to be influenced by the acidity of the medium. The reaction extended to biologically significant 3-substituted indoles gave a series of new products. 3-Substituted indoles bearing a basic group at their β-position (7, 11, 12 and 13) in acetic buffer (pH = 3) gave mainly cyclization to dihydrofurano or dihydropyrrolo [2.3-b] indoles (15,16, 20, 21 and 23), whereas those with the basic group at the γ-position (9,10) gave the 2 - (3 - methylbut - 2 - enyl) indole derivatives (18,19) only.     

Determination of fatty acid positions in native lipid A by positive and negative electrospray ionization mass spectrometry

Lipid A is the endotoxic principle of the lipopolysaccharide fraction from Gram-negative bacteria. It is involved in the elicitation of cytokine production that leads to massive inflammation and to septic shock as a lethal consequence. For this reason, the structural elucidation of lipopolysaccharides from toxic Gram-negative bacteria is an important and complicated task, mainly owing to its natural heterogeneity. Here, a new methodology to infer the distribution of the primary and secondary acyl residues is described, based on electrospray ionization mass spectrometry (ESI-MS) of intact lipid A under high cone voltage in order to achieve in-source fragmentation. Under these conditions, acyl fragmentation is induced and a different regioselective cleavage of secondary fatty acids is observed in positive and negative ESI-MS, allowing the rapid identification of the lipid A structure.     

Simultaneous liquid chromatography-fluorescence analysis of type A and type B trichothecenes as fluorescent derivatives via reaction with coumarin-3-carbonyl chloride

A method for the simultaneous LC-fluorescence detection (FLD) determination of eight trichothecenes A and B by pre-column derivatization with coumarin-3-carbonyl chloride, a highly fluorescent fluorophore, has been developed. The reaction conditions (temperature, reaction time, reactant ratios) were optimized to give a reproducible quantitative conversion. All derivatives were characterized by LC-MS. The chromatographic parameters were optimized (column, eluent) to give a very good separation of three type A (diacetoxyscirpenol, T-2 toxin, HT-2 toxin) and five type B trichothecenes [deoxynivalenol (DON), nivalenol, fusarenon-X, 3-acetyldeoxynivalenol, 15-acetyldeoxynivalenol]. The best conditions were obtained on a narrow-bore C18 column with a water-methanol gradient. The detection limits (S/N = 3:1) in grain samples, with an injected volume of 5 microl, were 0.2-1 ng/g for all trichothecenes. These values are more than one order of magnitude lower than those of other LC-FLD and LC-MS methods and are similar to those obtained by GC-MS. The calibration curves were linear between 100 and 2500 ng/g. The method was successfully applied to the analysis of a certified wheat reference material, after solvent extraction and clean-up on a Mycosep column, obtaining a good recovery (89% for DON) and a high accuracy (z-score value: 0.67).     

Enantioselective fluorescence sensing of amino acids by modified cyclodextrins: role of the cavity and sensing mechanism

Two selectors based on modified cyclodextrins containing a metal binding site and a dansyl fluorophore-6-deoxy-6-N-(N(alpha)-[(5-dimethylamino-1-naphthalenesulfonyl)aminoethyl]phenylalanylamino-beta-cyclodextrin-containing D-Phe (3) and L-Phe (4) moieties were synthesized. The conformations of the two selectors were studied by circular dichroism, two-dimensional NMR spectroscopy and time-resolved fluorescence spectroscopy. Cyclodextrin 4 was found to have a predominant conformation in which the dansyl group is self-included in the cyclodextrin cavity, while 3 showed a larger proportion of the conformation with the dansyl group outside the cavity. As a consequence, the two cyclodextrins were found to bind copper(II) with different affinities, as revealed by fluorescence quenching in competitive binding measurements. Addition of D- or L-amino acids induced increases in fluorescence intensity, which were dependent on the amino acid used and in some cases on its absolute configuration. The cyclodextrin 4 was found to be more enantioselective than 3, suggesting that the self-inclusion in the cyclodextrin cavity strongly increases the chiral discrimination ability of the copper(II) complex. Accordingly, a linear fluorescent ligand N(alpha)-[(5-dimethylamino-1-naphthalenesulfonyl)aminoethyl]-N(1)-propyl-phenylalaninamide, which has the same binding site and absolute configuration as 4, showed very low chiral discrimination ability. The enantioselectivity in fluorescence response was found to be due to the formation of diastereomeric ternary complexes, which were detected by ESI-MS and by circular dichroism. Time-resolved fluorescence studies showed that the fluorescence of the dansyl group was completely quenched in the ternary complexes formed, and that the residual fluorescence was due to uncomplexed ligand.