Oscillatory behavior of supersonic impinging jet flows

Oscillatory flows of a choked underexpanded supersonic impinging jet issuing from a convergent nozzle have been computed using the axisymmetric unsteady Navier--Stokes system. This paper focuses on the oscillatory flow features associated with the variation of the nozzle-to-plate distance and nozzle pressure ratio. Frequencies of the surface pressure oscillation and flow structural changes from computational results have been analyzed. Staging behavior of the oscillation frequency has been observed for both cases of nozzle-to-plate distance variation and pressure ratio variation. However, the staging behavior for each case exhibits different features. These two distinct staging behaviors of the oscillation frequency are found to correlate well if the frequency and the distance are normalized by the length of the shock cell. It is further found that the staging behavior is strongly correlated with the change of the pressure wave pattern in the jet shear layer, but not with the shock cell structure. Communicated by K. Takayama PACS 02.60.Cb; 47.40.−x; 47.40.Nm; 47.35.+I; 47.15.−x     

Three-dimensional viscoelastic simulation of coextrusion process: comparison with experimental data

 Three-dimensional numerical simulation of viscoelastic coextrusion process has been performed and numerical results were compared with the experimental data of Karagiannis et al. (1990). By varying the magnitude of the second normal stress difference and its ratio of Fluid I and Fluid II, we were able to control the interface profile and the degree of encapsulation along the downstream direction. By increasing the parameter α (α_Fluid I=α_Fluid II) from 0.1 to 0.4 in the Giesekus model and increasing the α ratio (α_Fluid Iα_Fluid II) between Fluid I and Fluid II from 2.0 to 4.0 in the permissible range of realistic polymeric systems, the interface profile and the degree of encapsulation along the downstream direction were fitted with the experimental results. There was little difference between the numerical results and the experimental data in the interface profile and the degree of encapsulation along the downstream direction when the α ratio was set to 3.0 (0.3:0.1). Fluid I with larger magnitude of the second normal stress difference protrudes into Fluid II with smaller magnitude of the second normal stress difference around the symmetric plane, while Fluid II wraps around Fluid I near the side walls. As the ξ ₁ ratio (ξ _{1 ,Fluid I}ξ _{1 ,Fluid II}) increases from 1.0 to 3.0 for the two-mode Phan-Thien and Tanner model, it was found that the curvature of the interface profile increased, and the difference between the numerical results and the experimental data in the interface profile and the degree of encapsulation along the downstream direction was almost negligible when the ξ ₁ ratio was set to 3.0 (0.54:0.18). Although the parameters of viscoelastic models were fitted by using the shear viscosity data only, quantitative agreements between the numerical results and the experimental coextrusion data were quite satisfactory. Received: 24 April 2001 Accepted: 5 June 2001     

Macroscopic and microscopic characteristics of a fuel spray impinged on the wall

An experimental study was performed to investigate the macroscopic behavior and atomization characteristics of a high-speed diesel spray impinged on the wall at various injection and impinging conditions. The development processes of sprays impinged on the wall were visualized using the spray visualization system composed of a Nd:YAG laser and an intensified charge-coupled device (ICCD) camera. The atomization characteristics of the impinged spray on the wall were also explored in terms of mean droplet diameter and velocity distributions by using a phase Doppler particle analyzer (PDPA) system. The results provide the effects of injection parameters, wall conditions, and the other various experimental conditions on the macroscopic behavior and atomization characteristics of the impinged sprays on the wall.     

Formation of a Syndiotactic Organic Polymer Inside a MOF by a [2+2] Photo‐Polymerization Reaction

Getting suitable crystals for single‐crystal X‐ray crystallographic analysis still remains an art. Obtaining single crystals of metal–organic frameworks (MOFs) containing organic polymers poses even greater challenges. Here we demonstrate the formation of a syndiotactic organic polymer ligand inside a MOF by quantitative [2+2] photopolymerization reaction in a single‐crystal‐to‐single‐crystal manner. The spacer ligands with trans,trans,trans‐conformation in the pillared‐layer MOF with guest water molecules in the channels, undergo pedal motion to trans,cis,trans‐conformation prior to [2+2] photo‐cycloaddition reaction and yield single crystals of MOF containing two‐dimensional coordination polymers fused with the organic polymer ligands. We also show that the organic polymer in the single crystals can be depolymerized reversibly by cleaving the cyclobutane rings upon heating. These MOFs also show interesting photoluminescent properties and sensing of small organic molecules.     

Integrating NiCo Alloys with Their Oxides as Efficient Bifunctional Cathode Catalysts for Rechargeable Zinc–Air Batteries

The lack of high‐efficient, low‐cost, and durable bifunctional electrocatalysts that act simultaneously for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is currently one of the major obstacles to commercializing the electrical rechargeability of zinc–air batteries. A nanocomposite CoO‐NiO‐NiCo bifunctional electrocatalyst supported by nitrogen‐doped multiwall carbon nanotubes (NCNT/CoO‐NiO‐NiCo) exhibits excellent activity and stability for the ORR/OER in alkaline media. More importantly, real air cathodes made from the bifunctional NCNT/CoO‐NiO‐NiCo catalysts further demonstrated superior performance to state‐of‐the‐art Pt/C or Pt/C+IrO₂ catalysts in primary and rechargeable zinc–air batteries.     

Octahedral and Cubic Gold Nanoframes with Platinum Framework

Herein, we report a general synthetic pathway to various shapes of three‐dimensional (3D) gold nanoframes (NFs) embedded with a Pt skeleton for structural rigidity. The synthetic route comprises three steps: site‐specific (edge and vertex) deposition of Pt, etching of inner Au, and regrowth of Au on the Pt framework. Site‐specific reduction of Pt on Au nanoparticles (NPs) led to the high‐quality of 3D Au NFs with good structural rigidity, which allowed the detailed characterization of the corresponding 3D metal NFs. The synthetic method described here will open new avenues toward many new kinds of 3D metal NFs.     

Understanding the Structural Differences between Spherical and Rod‐Shaped Human Insulin Nanoparticles Produced by Supercritical Fluids Precipitation

In this study, the thermal denaturation mechanism and secondary structures of two types of human insulin nanoparticles produced by a process of solution‐enhanced dispersion by supercritical fluids using dimethyl sulfoxide (DMSO) and ethanol (EtOH) solutions of insulin are investigated using spectroscopic approaches and molecular dynamics calculations. First, the temperature‐dependent IR spectra of spherical and rod‐shaped insulin nanoparticles prepared from DMSO and EtOH solution, respectively, are analyzed using principal component analysis (PCA) and 2D correlation spectroscopy to obtain a deeper understanding of the molecular structures and thermal behavior of the two insulin particle shapes. All‐atom molecular dynamics (AAMD) calculations are performed to investigate the influence of the solvent molecules on the production of the insulin nanoparticles and to elucidate the geometric differences between the two types of nanoparticles. The results of the PCA, the 2D correlation spectroscopic analysis, and the AAMD calculations clearly reveal that the thermal denaturation mechanisms and the degrees of hydrogen bonding in the spherical and rod‐shaped insulin nanoparticles are different. The polarity of the solvent might not alter the structure or function of the insulin produced, but the solvent polarity does influence the synthesis of different shapes of insulin nanoparticles.     

Conductivity‐Dependent Completion of Oxygen Reduction on Oxide Catalysts

The electric conductivity‐dependence of the number of electrons transferred during the oxygen reduction reaction is presented. Intensive properties, such as the number of electrons transferred, are difficult to be considered conductivity‐dependent. Four different perovskite oxide catalysts of different conductivities were investigated with varying carbon contents. More conductive environments surrounding active sites, achieved by more conductive catalysts (providing internal electric pathways) or higher carbon content (providing external electric pathways), resulted in higher number of electrons transferred toward more complete 4e reduction of oxygen, and also changed the rate‐determining steps from two‐step 2e process to a single‐step 1e process. Experimental evidence of the conductivity dependency was described by a microscopic ohmic polarization model based on effective potential localized nearby the active sites.     

Scoparone interferes with STAT3-induced proliferation of vascular smooth muscle cells

Scoparone, which is a major constituent of Artemisia capillaries, has been identified as an anticoagulant, hypolipidemic, vasorelaxant, anti-oxidant and anti-inflammatory drug, and it is used for the traditional treatment of neonatal jaundice. Therefore, we hypothesized that scoparone could suppress the proliferation of VSMCs by interfering with STAT3 signaling. We found that the proliferation of these cells was significantly attenuated by scoparone in a dose-dependent manner. Scoparone markedly reduced the serum-stimulated accumulation of cells in the S phase and concomitantly increased the proportion of cells in the G0/G1 phase, which was consistent with the reduced expression of cyclin D₁, phosphorylated Rb and survivin in the VSMCs. Cell adhesion markers, such as MCP-1 and ICAM-1, were significantly reduced by scoparone. Interestingly, this compound attenuated the increase in cyclin D promoter activity by inhibiting the activities of both the WT and active forms of STAT3. Similarly, the expression of a cell proliferation marker induced by PDGF was decreased by scoparone with no change in the phosphorylation of JAK2 or Src. On the basis of the immunofluorescence staining results, STAT3 proteins phosphorylated by PDGF were predominantly localized to the nucleus and were markedly reduced in the scoparone-treated cells. In summary, scoparone blocks the accumulation of STAT3 transported from the cytosol to the nucleus, leading to the suppression of VSMC proliferation through G1 phase arrest and the inhibition of Rb phosphorylation. This activity occurs independent of the form of STAT3 and upstream of kinases, such as Jak and Src, which are correlated with abnormal vascular remodeling due to the presence of an excess of growth factors following vascular injury. These data provide convincing evidence that scoparone may be a new preventative agent for the treatment of cardiovascular diseases.     

Analyses of the TCR repertoire of MHC class II-restricted innate CD4+ T cells

Analysis of the T-cell receptor (TCR) repertoire of innate CD4⁺ T cells selected by major histocompatibility complex (MHC) class II-dependent thymocyte–thymocyte (T-T) interaction (T-T CD4⁺ T cells) is essential for predicting the characteristics of the antigens that bind to these T cells and for distinguishing T-T CD4⁺ T cells from other types of innate T cells. Using the TCR^mini Tg mouse model, we show that the repertoire of TCRα chains in T-T CD4⁺ T cells was extremely diverse, in contrast to the repertoires previously described for other types of innate T cells. The TCRα chain sequences significantly overlapped between T-T CD4⁺ T cells and conventional CD4⁺ T cells in the thymus and spleen. However, the diversity of the TCRα repertoire of T-T CD4⁺ T cells seemed to be restricted compared with that of conventional CD4⁺ T cells. Interestingly, the frequency of the parental OT-II TCRα chains was significantly reduced in the process of T-T interaction. This diverse and shifted repertoire in T-T CD4⁺ T cells has biological relevance in terms of defense against diverse pathogens and a possible regulatory role during peripheral T-T interaction.