Extensional flow-induced crystallization of a polyethylene melt

Measurements of flow-induced orientation and crystallization have been made on a high-density polyethylene melt (HDPE) undergoing a planar extensional flow in a four-roll mill. The HDPE was suspended as a cylindrical droplet at the flow stagnation point in a linear low density polyethylene (LLDPE) carrier phase. Deformation and crystallization of the HDPE droplet phase were monitored using video imaging in conjunction with measurement of the birefringence and dichroism to quantify the in-situ transformation kinetics. Planar deformation rates along the symmetry axis of the molten HDPE phase were on the order of 0.03 s^?1. Measurements of the initial transformation rate following flow cessation at 131.5°C and 133.2°C show a dependence on initial amorphous phase orientation and the total Hencky strain achieved during flow. The flow-induced crystallization rate is enhanced over the quiescent transformation rate by orders of magnitude, however, the dependence on temperature is less dramatic than expected for a nucleation-controlled growth mechanism. Analysis demonstrates that the melting point elevation model cannot account either qualitatively or quantitatively for the phenomena observed, suggesting that alternative explanations for the strong orientation dependence of the transformation rate are needed.     

Comparison of analytical techniques to quantify malondialdehyde in milk powders

Several analytical methods were compared to quantify malondialdehyde (MDA) in milk powders. Modified thiobarbituric acid (TBA) methods, using either visible spectrophotometry (direct absorbance reading or after third derivative transformation of the spectrum) or HPLC, required derivatisation at elevated temperature, which appeared to catalyse artefactual MDA formation and thus overestimate the MDA content. In contrast to the TBA derivatisation method, the measurement of MDA as the dinitrophenylhydrazone derivative by HPLC or as the phenylhydrazone product by GC-MS with a deuterated internal standard resulted in lower estimates in the ranges of 2-17- and 3-30-fold, respectively; apparently due to the milder derivatisation conditions. The estimates of MDA determined by both HPLC-UV and GC-MS techniques result in lower values which are similar in magnitude even though the GC-MS technique is more sensitive.     

Chemical Synthesis of Oligonucleotides Containing N6-Methyladenine Residues in the GATC Site

To investigate by NMR the effects of adenine methylation, a set of oligodeoxynucleotides has been synthesized by phosphotriester or phosphoramidite procedures on silica-gel support. The preparation of fully protected 2′-deoxy-N⁶-methyladenosine 3′-phosphate 4 and (2′-deoxy-N⁶-methyladenosin-3′-O-yl)(methoxy)morpholinophosphine 5 is described. The large-scale chemical synthesis, purification by HPLC, and characterization by MS of these molecules containing N⁶-methyladenine is reported.     

Irreversible cathodic behavior of graphite in the presence of some mixtures of onium salts

The electrochemically induced dissolution of ferrocene in a carbon paste electrode is investigated by using chronoamperometry at constant potential. Two types of behaviour are observed, according to the initial form of ferrocene: particles or deposit. The experimental i-t curves are respectively in agreement with the theoretical curves, derived earlier, in the case of spherical particles or planar slabs of solid. The analysis of the curve shows that the process is diffusion controlled, so that the dissolution rate of ferrocene cannot be measured. The parameters calculated from the curves (thickness of the deposit, initial distance from the electrode, area) have a reasonable order of magnitude.     

Le diptérocarpol—II Stéréochimie en C-13 et en C-17

Various reactions of ring D of dipterocarpol (hydroxy-dammarenone-II) show this triterpene to have the configuration 13β, 17H, in accordance with biogenetic speculations.     

Structural and energetic aspects of the protonation of phenol,catechol, resorcinol,and hydroquinone

The various protonated forms of phenol (1), catechol (2), resorcinol (3), and hydroquinone (4) were explored by ab initio quantum chemical calculations at the MP2/6-31G(d) and B3LYP/6-31G(d) levels. Proton affinities (PA) of 1-4 were calculated by the combined G2(MP2,SVP) method, and their gas-phase basicities were estimated after calculation of the change in entropy on protonation. These theoretical data were compared with the corresponding experimental values determined in a high-pressure mass spectrometer. This comparison confirmed that phenols are essentially carbon bases and that protonation generally occurs in a position para to the hydroxyl group. Resorcinol is the most effective base (PA = 856 kJ mol-1) due to the participation of both oxygen atoms in the stabilization of the protonated form. Since protonation is accompanied by a freezing of the two internal rotations, a significant decrease in entropy is observed. The basicity of catechol (PA = 823 kJ mol-1) is due to the existence of an intramolecular hydrogen bond, which is strengthened upon protonation. The lower basicity of hydroquinone (PA = 808 kJ mol-1) is a consequence of the fact that protonation necessarily occurs in a position ortho to the hydroxyl group. When the previously published data are reconsidered and a corrected protonation entropy is used, a proton affinity value of 820 kJ mol-1 is obtained for phenol.     

A pipecolic acid (Pip)‐containing dipeptide,Boc‐d‐Ala‐l‐Pip‐NHiPr

The title dipeptide, 1‐(tert‐butoxy­carbonyl‐d ‐alanyl)‐N‐iso­propyl‐l ‐pipecol­amide or Boc‐d ‐Ala‐l ‐Pip‐NHⁱPr (H‐Pip‐OH is pipecolic acid or piperidine‐2‐carboxylic acid), C₁₇H₃₁N₃­O₄, with a d –l heterochiral sequence, adopts a type II′β‐­turn conformation, with all‐trans amide functions, where the C‐terminal amide NH group interacts with the Boc carbonyl O atom to form a classical i+3 i intramolecular hydrogen bond. The C^α substituent takes an axial position [H^α (Pip) equatorial] and the trans pipecolamide function is nearly planar.     

Structural changes in the monomeric despentapeptide (B30-B26) insulin crystal

Insulin modified by the removal of its 5 B chain C terminal residues is monomeric but remains substantially potent. The crystal structures of the beef and insulin (dpi) with two molecules in the asymmetric unit has been determined by x-ray analysis. The 3-dimensional structure ofdpi proves to be generally similar to that of native molecule in 2Zn insulin. More detailed comparison reveals that the slight differences in the two independent molecules of beefdpi are distributed uniformly throughout the structure in contrast to insulin in 2Zn insulin, where the structural changes are concentrated in specific regions. The loss of symmetry in thedpi crystal appears to be the inability of the A9 serine to pack effectively in the C2 cell. The efficient packing of the sheepdpi molecule whose crystal structure has also been determined and where A9 is glycine supports this conclusion.     

End-labeled free-solution electrophoresis of DNA

DNA is a free-draining polymer. This subtle but "unfortunate" property of highly charged polyelectrolytes makes it impossible to separate nucleic acids by free-flow electrophoresis. This is why one must typically use a sieving matrix, such as a gel or an entangled polymer solution, in order to obtain some electrophoretic size separation. An alternative approach consists of breaking the charge to friction balance of free-draining DNA molecules. This can be achieved by labeling the DNA with a large, uncharged molecule (essentially a hydrodynamic parachute, which we also call a drag-tag) prior to electrophoresis; the resulting methodology is called end-labeled free-solution electrophoresis (ELFSE). In this article, we review the development of ELFSE over the last decade. In particular, we examine the theoretical concepts used to predict the ultimate performance of ELFSE for single-stranded (ssDNA) sequencing, the experimental results showing that ELFSE can indeed overcome the free-draining issue raised above, and the technological advances that are needed to speed the development of competitive ELFSE-based sequencing and separation technologies. Finally, we also review the reverse process, called free-solution conjugate electrophoresis (FSCE), wherein uncharged polymers of different sizes can be analyzed using a short DNA molecule as an electrophoretic engine.     

Entrapment and release of sodium polystyrene sulfonate (SPS) from calcium alginate gel beads

The release of sodium polystyrene sulfonate (SPS) from calcium alginate hydrogel beads has been studied. It has been shown that the structure of the cross-linked calcium alginate network is of primary importance in the retention and/or release of the SPS. This has been evidenced by studying the influence of Ca²⁺ concentration, molar masses (M_n) and the ratio of mannuronic acid/guluronic acid components. A minimum in the SPS release is observed in relation with the organization of the network structure. Conditions inducing the organization of a strong gel (e.g. high Ca²⁺ concentration for example) are not always related to a low release. A good control of release is found when a compromise between a well-structured hydrogel and sterical consideration of SPS is reached.