Self-assembled monolayer gold electrode for surfactant analysis

A gold electrode coated with a self-assembled monolayer of octane-thiol (SAM/Au) has been used as an amperometric detector for the determination of surfactants. This detector operated in the presence of a high percentage of organic solvent and was adapted to an HPLC System. At the SAM/Au, the electrochemical response of an electroactive tracer (potassium ferricyanide) was completely inhibited, but, in the presence of a cationic surfactant, the electrochemical reduction was progressively restored. In flow injection analysis, using the SAM/Au in an amperometric flow-through detector polarised at 0.0 V vs Ag/AgCl, a linear response (i=f{[surfactant]}) was observed for cationic surfactants e.g. cetylpyridinium chloride in the concentration range 2 × 10⁻⁶–1 × 10⁻³ M. The electrochemical data along with the determination of the ion pair stoichiometry between the redox tracer and the surfactant suggest an electrochemical response related to ion pair formation and governed by electron transfer by tunneling effect. Received: 28 January 1997 / Accepted: 7 March 1997     

Chemical ionization desorption mass spectrometry of some quaternary ammonium salts

The ammonia chemical ionization desorption spectra of N,N-dimethyl quaternary ammonium iodides in addition to high protonated molecular ion [M + H]⁺ intensity, show signals for an ion radical composed of N-methyl abstracted salt cation and ammonia [C + NH₃? CH₃]^+˙. These ions corresponding to the cation +2 show increased importance in the chemical ionization mode, using the same reagent gas. The technique of chemical ionization desorption appears suitable for the analysis of salts, and thus for the determination of the molecular weight of both anion and cation.     

Diazo-Transfer Reaction with Diphenyl Phosphorazidate

Diphenyl phosphorazidate (DPPA) was used as the azide source in a one-pot synthesis of 2,2-disubstituted 3-amino-2H-azirines 1 (Scheme 1). The reaction with lithium enolates of amides of type 2 , bearing two substituents at C(2), proceeded smoothly in THF at 0°; keteniminium azides C and azidoenamines D are likely intermediates. Under analogous reaction conditions, DPPA and amides of type 3 with only one substituent at C(2) gave 2-diazoamides 5 in fair-to-good yield (Scheme 2). The corresponding 2-diazo derivatives 6–8 were formed in low yield by treatment of the lithium enolates of N,N-dimethyl-2-phenylacetamide, methyl 2-phenylacetate, and benzyl phenyl ketone, respectively, with DPPA. Thermolysis of 2-diazo-N-methyl-N-phenylcarboxamides 5a and 5b yielded 3-substituted 1,3-dihydro-N-methyl-2H-indol-2-ones 9a and 9b , respectively (Scheme 3). The diazo compounds 5–8 reacted with 1,3-thiazole-5 (4H)-thiones 10 and thiobenzophenone ( 13 ) to give 6-oxa-1,9-dithia-3-azaspiro[4.4]nona-2,7-dienes 11 (Scheme 4) and thiirane-2-carboxylic acid derivatives 14 (Scheme 5), respectively. In analogy to previously described reactions, a mechanism via 1,3-dipolar cycloaddition, leading to 2,5-dihydro-1,3,4-thiadiazoles, and elimination of N₂ to give the ‘thiocarbonyl ylides’ of type H or K is proposed. These dipolar intermediates with a conjugated C?O group then undergo either a 1,5-dipolar electrocyclization to give spirohetrocycles 11 or a 1,3-dipolar electrocyclization to thiiranes 14 .     

Direct coupling of polymer-based microchip electrophoresis to online MALDI-MS using a rotating ball inlet

We report on the coupling of a polymer-based microfluidic chip to a MALDI-TOF MS using a rotating ball interface. The microfluidic chips were fabricated by micromilling a mold insert into a brass plate, which was then used for replicating polymer microparts via hot embossing. Assembly of the chip was accomplished by thermally annealing a cover slip to the embossed substrate to enclose the channels. The linear separation channel was 50 microm wide, 100 microm deep, and possessed an 8 cm effective length separation channel with a double-T injector (V(inj) = 10 nL). The exit of the separation channel was machined to allow direct contact deposition of effluent onto a specially constructed rotating ball inlet to the mass spectrometer. Matrix addition was accomplished in-line on the surface of the ball. The coupling utilized the ball as the cathode transfer electrode to transport sample into the vacuum for desorption with a 355 nm Nd:YAG laser and analyzed on a TOF mass spectrometer. The ball was cleaned online after every rotation. The ability to couple poly(methylmethacrylate) microchip electrophoresis devices for the separation of peptides and peptide fragments produced from a protein digest with subsequent online MALDI MS detection was demonstrated.     

EFFECT OF CHLORIDE AND BENZOATE ANIONS ON THE DELAYED LIGHT EMISSION IN DCMU-TREATED SPINACH CHLOROPLASTS

Abstract —Chloride anions, when added to DCMU [3-(3,4-dichlorophenyl)-1,1-dimethylurea]-treated spinach chloroplasts, change the rate of decay of the delayed light emission in the seconds region but do not change the shape or the temperature dependence of the decay. Benzoate anions, on the other hand, change both the rate and the shape of the decay of the delayed light emission. These results are consistent with a model in which the membrane potential and the structure of the reaction center affect the decay kinetics of the delayed light emission in the seconds region.     

Reaction of γ‐Hydroxy‐N‐[1‐(dimethylcarbamoyl)ethyl]butanamides under the ‘Direct Amide Cyclization’ Conditions

The preparation of the title compounds was achieved via the ‘azirine/oxazolone method’ starting from the corresponding γ‐hydroxy acids. Upon subjecting the γ‐hydroxy‐N‐[1‐(dimethylcarbamoyl)ethyl]butanamides 4 to the so‐called ‘direct amide cyclization’ (DAC) conditions, chlorinated acids 11 or imino lactones 12 were obtained as the sole products instead of the expected cyclodepsipeptides A or their cyclodimers (Scheme 4). Variation of the substituents in 4 did not affect the outcome of the reaction and a mechanism for the formation of both products from the intermediate oxazolone 13 has been proposed. Under the acidic conditions of the DAC, the imino lactones are formed as their HCl salts 12 , which, in polar solvents or on silica gel, reacted further to give the chlorinated acids 11 . Stabilization of the imino lactones was achieved by increasing the substitution in the five‐membered ring, and their structure, in the form of the hydrochlorides, was established independently by X‐ray crystallography (Fig. 4). A derivative 15 of the imino lactone 12a was prepared by the reaction with the 2H‐azirin‐3‐amine 10a ; its structure was also established by an X‐ray crystal‐structure determination (Fig. 3). Furthermore, the structures of the ω‐chloro acids 11a and 11b were determined by X‐ray crystallography (Fig. 2).     

Persistent (amino)(silyl)carbenes

(Amino)(silyl)carbenes, prepared by substitution reactions at a carbene center, can survive several days at 0 degrees C. These species are not push-pull carbenes as their phosphino analogues and therefore are excellent ligands for transition-metal centers.     

A beta-lactam-based stereoselective access to beta,gamma-dihydroxy alpha-amino acid-derived peptides with either alpha,beta-like or unlike configurations

A concise access to alpha,beta-dihydroxy alpha-amino acid-derived N-carboxy anhydrides (NCAs) with either like or unlike relative configuration is described. The key steps of the synthetic route are the preparation of the nonracemic 4-alkenyl beta-lactams, through either Horner-type olefination of a common 4-formyl beta-lactam or the Corey-Winter alkene synthesis applied to 4-dihydroxyalkyl beta-lactams, followed by the Sharpless AD reaction, and a subsequent ring expansion of the corresponding 4-substituted 3-hydroxy beta-lactams promoted by TEMPO. The opening of thus-prepared NCAs upon treatment with different O- and N-nucleophiles, including alpha-amino esters which lead to peptides, has also been studied under various reaction conditions.     

Activation analysis of geological material using ruthenium as a multiisotopic comparator

The isotopes⁹⁷Ru,¹⁰³Ru and¹⁰⁵Ru, produced by reactor irradiation of elemental ruthenium, were applied as triple comparators in the activation analysis of rock FU-41, a basanitoid from Fuerteventura, Canary Island. The concentrations of the following elements were determined: Sm, Sc, Fe, Co, Na, La, Hf, Eu, Th and Cr. The aim of this work was the experimental control of the error theory of the multiple comparator method as well as the experimental check of the accuracy. Presented at the 3rd Symposium on the Recent Developments in Neutron Activation Analysis, Cambridge (U.K.), 2–4 July 1973.     

Validation studies and proficiency testing

Genetically modified organisms (GMOs) entered the European food market in 1996. Current legislation demands the labeling of food products if they contain <1% GMO, as assessed for each ingredient of the product. To create confidence in the testing methods and to complement enforcement requirements, there is an urgent need for internationally validated methods, which could serve as reference methods. To date, several methods have been submitted to validation trials at an international level; approaches now exist that can be used in different circumstances and for different food matrixes. Moreover, the requirement for the formal validation of methods is clearly accepted; several national and international bodies are active in organizing studies. Further validation studies, especially on the quantitative polymerase chain reaction methods, need to be performed to cover the rising demand for new extraction methods and other background matrixes, as well as for novel GMO constructs.