Thermal degradation of a series of polyester polyurethanes

A series of polyester polyurethanes with a range of polyester contents was prepared from an ethylene glycol/propylene glycol/adipic acid polyster, butane diol, and methylene bis (4-phenyl isocyanate) (MBPI). They were thermally degraded under vacuum and the products of degradation were identified. The urethane linkages decompose first as the temperature is increased and the stability increases with polyester content. Reaction mechanisms were proposed which account for the principal features of the reaction and the products of degradation.     

Extensional flow-induced crystallization of a polyethylene melt

Measurements of flow-induced orientation and crystallization have been made on a high-density polyethylene melt (HDPE) undergoing a planar extensional flow in a four-roll mill. The HDPE was suspended as a cylindrical droplet at the flow stagnation point in a linear low density polyethylene (LLDPE) carrier phase. Deformation and crystallization of the HDPE droplet phase were monitored using video imaging in conjunction with measurement of the birefringence and dichroism to quantify the in-situ transformation kinetics. Planar deformation rates along the symmetry axis of the molten HDPE phase were on the order of 0.03 s^?1. Measurements of the initial transformation rate following flow cessation at 131.5°C and 133.2°C show a dependence on initial amorphous phase orientation and the total Hencky strain achieved during flow. The flow-induced crystallization rate is enhanced over the quiescent transformation rate by orders of magnitude, however, the dependence on temperature is less dramatic than expected for a nucleation-controlled growth mechanism. Analysis demonstrates that the melting point elevation model cannot account either qualitatively or quantitatively for the phenomena observed, suggesting that alternative explanations for the strong orientation dependence of the transformation rate are needed.     

Comparison of analytical techniques to quantify malondialdehyde in milk powders

Several analytical methods were compared to quantify malondialdehyde (MDA) in milk powders. Modified thiobarbituric acid (TBA) methods, using either visible spectrophotometry (direct absorbance reading or after third derivative transformation of the spectrum) or HPLC, required derivatisation at elevated temperature, which appeared to catalyse artefactual MDA formation and thus overestimate the MDA content. In contrast to the TBA derivatisation method, the measurement of MDA as the dinitrophenylhydrazone derivative by HPLC or as the phenylhydrazone product by GC-MS with a deuterated internal standard resulted in lower estimates in the ranges of 2-17- and 3-30-fold, respectively; apparently due to the milder derivatisation conditions. The estimates of MDA determined by both HPLC-UV and GC-MS techniques result in lower values which are similar in magnitude even though the GC-MS technique is more sensitive.     

Chemical Synthesis of Oligonucleotides Containing N6-Methyladenine Residues in the GATC Site

To investigate by NMR the effects of adenine methylation, a set of oligodeoxynucleotides has been synthesized by phosphotriester or phosphoramidite procedures on silica-gel support. The preparation of fully protected 2′-deoxy-N⁶-methyladenosine 3′-phosphate 4 and (2′-deoxy-N⁶-methyladenosin-3′-O-yl)(methoxy)morpholinophosphine 5 is described. The large-scale chemical synthesis, purification by HPLC, and characterization by MS of these molecules containing N⁶-methyladenine is reported.     

Irreversible cathodic behavior of graphite in the presence of some mixtures of onium salts

The electrochemically induced dissolution of ferrocene in a carbon paste electrode is investigated by using chronoamperometry at constant potential. Two types of behaviour are observed, according to the initial form of ferrocene: particles or deposit. The experimental i-t curves are respectively in agreement with the theoretical curves, derived earlier, in the case of spherical particles or planar slabs of solid. The analysis of the curve shows that the process is diffusion controlled, so that the dissolution rate of ferrocene cannot be measured. The parameters calculated from the curves (thickness of the deposit, initial distance from the electrode, area) have a reasonable order of magnitude.     

Le diptérocarpol—II Stéréochimie en C-13 et en C-17

Various reactions of ring D of dipterocarpol (hydroxy-dammarenone-II) show this triterpene to have the configuration 13β, 17H, in accordance with biogenetic speculations.     

Structural and energetic aspects of the protonation of phenol,catechol, resorcinol,and hydroquinone

The various protonated forms of phenol (1), catechol (2), resorcinol (3), and hydroquinone (4) were explored by ab initio quantum chemical calculations at the MP2/6-31G(d) and B3LYP/6-31G(d) levels. Proton affinities (PA) of 1-4 were calculated by the combined G2(MP2,SVP) method, and their gas-phase basicities were estimated after calculation of the change in entropy on protonation. These theoretical data were compared with the corresponding experimental values determined in a high-pressure mass spectrometer. This comparison confirmed that phenols are essentially carbon bases and that protonation generally occurs in a position para to the hydroxyl group. Resorcinol is the most effective base (PA = 856 kJ mol-1) due to the participation of both oxygen atoms in the stabilization of the protonated form. Since protonation is accompanied by a freezing of the two internal rotations, a significant decrease in entropy is observed. The basicity of catechol (PA = 823 kJ mol-1) is due to the existence of an intramolecular hydrogen bond, which is strengthened upon protonation. The lower basicity of hydroquinone (PA = 808 kJ mol-1) is a consequence of the fact that protonation necessarily occurs in a position ortho to the hydroxyl group. When the previously published data are reconsidered and a corrected protonation entropy is used, a proton affinity value of 820 kJ mol-1 is obtained for phenol.     

Chiral auxiliary based approach toward the synthesis of C-glycosylated amino acids

[reaction in text] In a chiral auxiliary based method C-glycosylated amino acids can be obtained by a 1,3-dipolar cycloaddition of a chiral glycine equivalent and C-1 allyl- or vinyl-derived carbohydrate building blocks as the key step. The products are formed regio- and diastereoselectively. Reductive cleavage of the N-O bond of the isoxazolidine and of the chiral auxiliary leads to C-glycosylated amino acids. The use of (-)-menthone to (+)-menthone as the auxiliary leads to the corresponding diastereomers.     

Beiträge zur Chemie der Pyrrolpigmente, 78. Mitt.: Die Eigenschaften desb-Nor-bilatrien-abc-b-Nor-biladien-ac-Systems

The redox coupleb-nor-biladiene-ac (2)/b-nor-bilatriene-abc (3) exhibits an oxidative half wave potential of 800 mV in acetonitrile solution. It is demonstrated that it can be used as an extremely efficient electron carrier through bulk membranes. Whereas2 is not suitable as a ligand in carrier mediated cation transport,3 is a medium suited carrier for Cu(II) or Zn(II) ions, however, it is the most efficient one found so far for transport of Hg(II) ions. A 1:1 zinc chelate of3 is isolated and characterized. it is deduced to represent a polymer consisting of about 73 monomer units.

     

A pipecolic acid (Pip)‐containing dipeptide,Boc‐d‐Ala‐l‐Pip‐NHiPr

The title dipeptide, 1‐(tert‐butoxy­carbonyl‐d ‐alanyl)‐N‐iso­propyl‐l ‐pipecol­amide or Boc‐d ‐Ala‐l ‐Pip‐NHⁱPr (H‐Pip‐OH is pipecolic acid or piperidine‐2‐carboxylic acid), C₁₇H₃₁N₃­O₄, with a d –l heterochiral sequence, adopts a type II′β‐­turn conformation, with all‐trans amide functions, where the C‐terminal amide NH group interacts with the Boc carbonyl O atom to form a classical i+3 i intramolecular hydrogen bond. The C^α substituent takes an axial position [H^α (Pip) equatorial] and the trans pipecolamide function is nearly planar.