Effect of branching and confinement on star-branched polymeric systems

The effect of confinement, number of branches (functionality), and size of the molecules on various properties as a function of temperature of star-branched polymers confined between two walls was studied using Monte Carlo simulations with the parallel tempering technique. The coil-to-globule transition and the liquidlike to solidlike transition, similar to those observed for linear chains, were characterized in all systems by changes in the heat capacity, internal energy, and radius of gyration. The transitions were also characterized by the most probable isomeric structure at a given temperature. The radius of gyration of the star polymers was smaller than the values of linear chains when the number of arms f increased. For star chains with more than f=5 arms the values of the radius of gyration, and therefore the size of the molecules, were similar for every condition of confinement studied, especially at higher temperatures. As confinement was increased, the difference in the radius of gyration of linear chains and star polymers became even larger. The coil-to-globule transition temperatures shifted to higher temperatures as the size of the chains and the number of arms in a molecule were increased. Effects of confinement were higher on the properties of the system at the smallest separations (less than twice the monomer diameter), where the coil-to-globule transition shifted to lower temperatures. The liquidlike to solidlike transition was present at almost the same temperature for different conditions of confinement, chain size, and number of arms. The behavior of the systems for separations between the walls greater than five bead diameters was similar to the behavior in the unconfined case. Hence, no considerable effect of confinement was found above this separation.     

Crystal Structure, Electric and Magnetic Properties of Layered Cobaltite β-NaxCoO2

The layered oxide thermoelectric material β-Na_0.67CoO₂ has been studied by powder neutron diffraction, electric and magnetic measurements. This compound includes an edge-sharing CoO₆ slab and a highly vacant Na⁺ sheet in a unit cell (space group symmetry C2/m, a=4.9023(4) Å, b=2.8280(2) Å, c=5.7198(6) Å and β=105.964(6)° at 300 K). The evaluated formal valence of cobalt ion, +3.33(1), is ascribed to the coexistence of Co³⁺ and Co⁴⁺ in the ratio 2:1. Polycrystalline β-Na_0.67CoO₂, a p-type thermoelectric material, exhibits metallic behavior of the electric resistivity below 300 K. The Curie-Weiss-type magnetic susceptibility indicates antiferromagnetic interactions between magnetic cobalt ions in the edge-sharing CoO₆ slab.     

Synthesis of 12-deoxyroyleanone, cryptoquinone, 11,14-dihydroxy-8,11,13-abietatrien-7-one, and related derivatives from dehydroabietic acid

Naturally occurring abietane quinones and hydroquinone, namely, 12-deoxyroyleanone (1a), cryptoquinone (4a), and 11,14-dihydroxyabieta-8,11,13-trien-7-one (5a), together with the epimers of tryptoquinones D (2) and F (3), were first synthesized from dehydroabietic acid (6).     

Molecular recognition of l-leucyl-l-alanine: enantioselective inclusion of alkyl methyl sulfoxides

A simple aliphatic dipeptide, l-leucyl-l-alanine (Leu-Ala), includes several alkyl methyl sulfoxides enantioselectively to form inclusion crystals. From single-crystal X-ray analyses of three inclusion compounds of dimethyl sulfoxide (DMSO), isobutyl methyl sulfoxide, and benzyl methyl sulfoxide, it was elucidated that Leu-Ala molecules self-assemble to form layer structures and the sulfoxides are included via hydrogen bonding in a cavity between these layers. The inclusion cavity has methyl group and isobutyl group at its each side, and the guest sulfoxide is placed in such a manner that its methyl group faces toward the methyl of the Leu-Ala cavity. When the alkyl group of the sulfoxide is comparably large, it is located in the residual space of the cavity to attain effective crystal packing. Thus, the sulfoxides having a comparably large group such as isobutyl, butyl, and benzyl are included with a high (R)-enantioselectivity in Leu-Ala crystals.     

A new finding in selective Baeyer-Villiger oxidation of α-fluorinated ketones; a new and practical route for the synthesis of α-fluorinated esters

α-Fluorinated esters were effectively prepared by the Baeyer-Villiger oxidation of α-fluorinated ketones with m-chloroperbenzoic acid (m-CPBA) under mild conditions. The yield of the esters was influenced by the choice of solvent, base, and substituent on the aryl group of the ketones. 4-Methoxyphenyl substituted fluoroketones were oxidized almost quantitatively with m-CPBA within 10 min to 12 h at room temperature using 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) as a cosolvent with CH₂Cl₂ (1:1, v/v) and aqueous buffer (KH₂PO₄-NaOH, pH 7.6) as an additive base. The oxidation reaction rates of α-fluorinated ketones were higher than those of the corresponding non-fluorinated ketones. The fluorine atom at α-position of fluoromethyl aryl ketones enhanced the reactivity in the Baeyer-Villiger oxidation.     

Non-C2-symmetrical antimony-phosphorus ligand, (R/S)-2-diphenylphosphano-2′-di(p-tolyl)stibano-1,1′-binaphthyl (BINAPSb): preparation and its use for asymmetric reactions as a chiral auxiliary

A new non-C₂-symmetrical antimony-phosphorous ligand, (±)-2-diphenyl-phosphano-2′-di(p-tolyl)stibano-1,1′-binaphthyl (BINAPSb) 3, has been prepared from 2-bromo-2′-diphenylphosphano-1,1′-naphthyl 4 via its borane complex 6, and could be resolved by the separation of a mixture of the diastereomeric palladium complexes 8A and 8B derived from the reaction of (±)-3 with optically active palladium reagent (S)-7. The enantiomerically pure BINAPSb 3 has proved to be highly effective in the palladium-catalyzed asymmetric hydrosilylation of styrene as a chiral auxiliary.     

Profiling analysis of oligosaccharides in antibody pharmaceuticals by capillary electrophoresis

Carbohydrate chains in glycoprotein pharmaceuticals have important roles for the expression of their biological activities. Therefore, development of an assessment method for the carbohydrate chains is an important parameter for quality control of glycoprotein pharmaceuticals such as newly developed therapeutic antibodies. In this report, we applied capillary electrophoresis with laser-induced fluorescence detection to the analysis of carbohydrate chains after releasing with glycoamidase followed by derivatization with 3-aminobenzoic acid. We found that four major oligosaccharides present in antibody pharmaceuticals were successfully separated with good resolution. The present method showed good precision in both migration times and relative peak areas, and gave comparable accuracy with that using a derivatization method with 8-aminopyrene-1,3,6-trisulfonate.     

Ultrasensitive small molecule fluorogenic probe for human heparanase

Heparanase (HPA) is a critical enzyme involved in the remodeling of the extracellular matrix (ECM), and its elevated expression has been linked with diseases such as various types of cancer and inflammation. The detection of heparanase enzymatic activity holds tremendous value in the study of the cellular microenvironment, and search of molecular therapeutics targeting heparanase, however, no structurally defined probes are available for the detection of heparanase activity. Here we present the development of the first ultrasensitive fluorogenic small-molecule probe for heparanase enzymatic activity via tuning the electronic effect of the substrate. The probe exhibits a 756-fold fluorescence turn-on response in the presence of human heparanase, allowing one-step detection of heparanase activity in real-time with a picomolar detection limit. The high sensitivity and robustness of the probe are exemplified in a high-throughput screening assay for heparanase inhibitors.

Heparanase, a critical enzyme involved in the remodeling of the extracellular matrix, activates a disaccharide probe HADP to give a strong fluorescence signal.     

Screen-printed electrochemical hybridization biosensor for the detection of DNA sequences from the Escherichia coli pathogen

An electrochemical biosensor for the specific detection of short DNA sequences from the E. coli pathogen is described. This hybridization device relies on the immobilization of a 25-mer oligonucleotide probe, from the E. coli lacZ gene, onto a screen-printed carbon electrode. Chronopotentiometric detection of the Co(bpy)₃⁺³ indicator is used for monitoring the hybridization event. Numerous variables of the assay protocol, including those of the probe immobilization step, the hybridization event, and the indicator association/detection, are characterized and optimized. Hybridization times of 2- and 30-min are sufficient for detecting 300- and 50 ng/mL, respectively, of the E. coli DNA target. Applicability to analysis of untreated environmental water samples is illustrated. Such single-use electrochemical sensors hold great promise for decentralized environmental and food testing for the E. coli pathogen.