Nitrous Oxide as a Hydrogen Acceptor for the Dehydrogenative Coupling of Alcohols

The oxidation of alcohols with N₂O as the hydrogen acceptor was achieved with low catalyst loadings of a rhodium complex that features a cooperative bis(olefin)amido ligand under mild conditions. Two different methods enable the formation of either the corresponding carboxylic acid or the ester. N₂ and water are the only by‐products. Mechanistic studies supported by DFT calculations suggest that the oxygen atom of N₂O is transferred to the metal center by insertion into the Rh?H bond of a rhodium amino hydride species, generating a rhodium hydroxy complex as a key intermediate.     

Adiabatic corrections to density functional theory energies and wave functions

The adiabatic finite-nuclear-mass-correction (FNMC) to the electronic energies and wave functions of atoms and molecules is formulated for density-functional theory and implemented in the deMon code. The approach is tested for a series of local and gradient corrected density functionals, using MP2 results and diagonal-Born-Oppenheimer corrections from the literature for comparison. In the evaluation of absolute energy corrections of nonorganic molecules the LDA PZ81 functional works surprisingly better than the others. For organic molecules the GGA BLYP functional has the best performance. FNMC with GGA functionals, mainly BLYP, show a good performance in the evaluation of relative corrections, except for nonorganic molecules containing H atoms. The PW86 functional stands out with the best evaluation of the barrier of linearity of H2O and the isotopic dipole moment of HDO. In general, DFT functionals display an accuracy superior than the common belief and because the corrections are based on a change of the electronic kinetic energy they are here ranked in a new appropriate way. The approach is applied to obtain the adiabatic correction for full atomization of alcanes C(n)H(2n+2), n = 4-10. The barrier of 1 mHartree is approached for adiabatic corrections, justifying its insertion into DFT.     

Theoretical study of CeO2 and Ce2O3 using a screened hybrid density functional

The predicted structures and electronic properties of CeO(2) and Ce(2)O(3) have been studied using conventional and hybrid density functional theory. The lattice constant and bulk modulus for CeO(2) from local (LSDA) functionals are in good agreement with experiment, while the lattice parameter from a generalized gradient approximation (GGA) is too long. This situation is reversed for Ce(2)O(3), where the LSDA lattice constant is much too short, while the GGA result is in reasonable agreement with experiment. Significantly, the screened hybrid HSE functional gives excellent agreement with experimental lattice constants for both CeO(2) and Ce(2)O(3). All methods give insulating ground states for CeO(2) with gaps for the 4f band lying between 1.7 eV (LSDA) and 3.3 eV (HSE) and 6-8 eV for the conduction band. For Ce(2)O(3) the local and GGA functionals predict a semimetallic ground state with small (0-0.3 eV) band gap but weak ferromagnetic coupling between the Ce(+3) centers. By contrast, the HSE functional gives an insulating ground state with a band gap of 3.2 eV and antiferromagnetic coupling. Overall, the hybrid HSE functional gives a consistent picture of both the structural and electronic properties of CeO(2) and Ce(2)O(3) while treating the 4f band consistently in both oxides.     

Intercalation of tris-(2,2′-bipyridyl) ruthenium (II) in α- and γ-zirconium phosphate: synthesis, thermal behaviour and X-ray characterization

Intercalation compounds such as the ruthenium trisbipyridyl complex in inorganic layered ion-exchangers (α- and γ-zirconium phosphate) have been synthesized using the batch method. There is no loss of bipyridyl ligand from the metal ion during the exchange of the ruthenium trisbipyridyl complex in these host matrices. The materials obtained are thermally stable up to ~330 °C (γ-phase) or ~380 °C (α-phase). The complex decomposition occurs in one or more steps and at ~600 °C the complex decomposition is complete. The X-ray patterns of ruthenium materials show a new phase with an increase in the interlayer distance with respect to the initial phase. Microanalysis measurements confirm the fact that the ruthenium complex is not modified when exchanged and the complex decomposition depends on its position in the host matrices.     

Rare earth elements,thorium and uranium in ores of the North-Latium (Italy)

In geochemistry, the distribution of the Rare Earth Elements (REEs) in earth crust and mantle allows to understand geochemical cycles and origin and age of igneous rocks. In this article REEs (Ce, Dy, Eu, La, Nd, Sm, Tb, and Yb), Th and U in ores of the North-Latium (Bracciano area, Ceriti Mt., Fate Mt., Sabatini Mt., Vulsini Mt., Acqua Rossa basin), have been investigated for evaluating the extraction feasibility for industrial applications. 107 samples were irradiated in the rotating rack of the TRIGA Mark II reactor of the R.C. Casaccia (ENEA) at neutron flux of 2.6 × 10¹² n × cm⁻² × s⁻¹ for 12 h together with primary and secondary standards. The gamma spectrometry measurements were performed after 8 h, 3 and 30 days of decay by means of HPGe detector (FWHM 1.75 keV at 1332.5 keV, peak/Compton ratio 55.1, relative efficiency of 22%) connected to a multi-channel analyzer. The total REE mean content is 105 μg g⁻¹, ranging widely between 2.23 and 410.5 μg g⁻¹ (average coefficient of variation 112%). A similar behavior is found for Th and U: their average levels are 13.5 and 6.0 μg g⁻¹, respectively. A quite good correlation between REEs and Th (and U) is found for Ceriti Mt. (r ² > 0.8) whereas for the other areas the correlation is <0.7. The results obtained evidence the low U content in the investigated locations.     

J-aggregation of a water-soluble tetracationic porphyrin in mixed LB films with a calix[8]arene carboxylic acid derivative

The molecular organization of a mixed film, containing a water-soluble tetracationic porphyrin (TMPyP) and a p-tert-butyl calix[8]arene octacarboxylic acid derivative (C8A), at the air-water interface and on a solid support (LB film), has been investigated. Although the TMPyP aggregation was not detected at the air-water interface, TMPyP J-aggregates have been found in the LB films (Y-type). Unlike tetraanionic porphyrins, for example TSPP, the TMPyP J-aggregates are not induced by a zwitterion formation. The TMPyP J-aggregation is a result of a "double comb" configuration, where porphyrins from opposite layers are interwoven in a linear infinite J-aggregate. Our results confirm that TMPyP molecules tend to self-aggregate strongly, provided the electrostatic repulsions of their peripheral groups are cancelled by the anionic groups of the C8A matrix.     

Source apportionment of groundwater pollutants in Apulian agricultural sites using multivariate statistical analyses: case study of Foggia province

Background

Ground waters are an important resource of water supply for human health and activities. Groundwater uses and applications are often related to its composition, which is increasingly influenced by human activities.In fact the water quality of groundwater is affected by many factors including precipitation, surface runoff, groundwater flow, and the characteristics of the catchment area. During the years 2004-2007 the Agricultural and Food Authority of Apulia Region has implemented the project “Expansion of regional agro-meteorological network” in order to assess, monitor and manage of regional groundwater quality. The total wells monitored during this activity amounted to 473, and the water samples analyzed were 1021. This resulted in a huge and complex data matrix comprised of a large number of physical-chemical parameters, which are often difficult to interpret and draw meaningful conclusions. The application of different multivariate statistical techniques such as Cluster Analysis (CA), Principal Component Analysis (PCA), Absolute Principal Component Scores (APCS) for interpretation of the complex databases offers a better understanding of water quality in the study region.

Results

Form results obtained by Principal Component and Cluster Analysis applied to data set of Foggia province it’s evident that some sampling sites investigated show dissimilarities, mostly due to the location of the site, the land use and management techniques and groundwater overuse. By APCS method it’s been possible to identify three pollutant sources: Agricultural pollution 1 due to fertilizer applications, Agricultural pollution 2 due to microelements for agriculture and groundwater overuse and a third source that can be identified as soil run off and rock tracer mining.

Conclusions

Multivariate statistical methods represent a valid tool to understand complex nature of groundwater quality issues, determine priorities in the use of ground waters as irrigation water and suggest interactions between land use and irrigation water quality.

Open image in new window

     

The role of orbiting resonances in the vibrational relaxation of I(2)(B,v' = 21) by collisions with He at very low energies: a theoretical and experimental study

The low-energy collisions of I(2)(B,v' = 21) with He involving collision-induced vibrational relaxation of I(2) are investigated both experimentally and by means of wave packet simulations. The theoretical cross sections exhibit a structure of peaks originated by orbiting resonances of the I(2)(B,v' = 21) - He van der Waals complex formed in the I(2) + He collisions. Such a structure has similar characteristics as the structure of peaks found in the experimental cross sections. In fact, four of the five peaks of the measured cross sections appear at positions nearly coincident with those of four of the peaks found in the theoretical cross sections. Thus this result confirms the experimental finding that enhancement of I(2) vibrational relaxation is caused by the population of I(2)(B,v' = 21) - He orbiting resonances populated upon the low-energy collisions. The possibility of using this mechanism in the vibrational cooling of diatomic molecules is discussed.     

Random benzotrithiophene-based donor-acceptor copolymers for efficient organic photovoltaic devices

A series of benzotrithiophene-containing random terpolymers for polymer solar cells is reported. Through variations of the two other components in the terpolymers, the absorption profile and the frontier energy levels are optimized and maximum power conversion efficiencies are nearly doubled (5.14%) relative to the parent alternating copolymer.