Electrochemical DNA biosensor for human papillomavirus 16 detection in real samples

An electrochemical DNA biosensor for human papillomavirus (HPV) 16 detection has been developed. For this proposed biosensor, l-cysteine was first electrodeposited on the gold electrode surface to form l-cysteine film (CYSFILM). Subsequently, HPV16-specific probe was immobilized on the electrode surface with CYSFILM. Electrochemistry measurement was studied by differential pulse voltammetry method (DPV). The measurement was based on the reduction signals of methylene blue (MB) before and after hybridization either between probe and synthetic target or extracted DNA from clinical samples. The effect of probe concentration was analyzed and the best results were seen at 1000 nM. The hybridization detection presented high sensitivity and broad linear response to the synthetic-target concentration comprised between 18.75 nM and 250 nM as well as to a detection limit of 18.13 nM. The performance of this biosensor was also investigated by checking probe-modified electrode hybridization with extracted DNA from samples. The results showed that the biosensor was successfully developed and exhibited high sensitivity and satisfactory selectivity to HPV16. These results allow for the possibility of developing a new portable detection system for HPVs and for providing help in making an effective diagnosis in the early stages of infection.     

Monitoring and Evolution of the Pollution by Volatile Organic Compounds (Vocs) in the Groundwaters of The Najerilla River Basin (Spain)

VOCs were detected and identified in the water of several wells in the area of Nájera (La Rioja). The past uncontrolled spills from an important painting and varnishing industry and from other smaller ones devoted to the manufacture of furniture and varnishing activities were the sources of the VOCs plume detected in this aquifer. This article shows the results obtained in the monitoring and assessment of the pollution at 18 sampling points for more than a year. It has allowed us to study the evolution of the different pollutants and the influence of a remediation process applied by the company in the main pollution source. The analytical method is based on headspace-solid-phase microextraction (SPME) using a 75-μm carboxen-polydimethylsiloxane fibre. Quantification was carried out by gas chromatography with flame ionization detection. This method has allowed us to determine the 13 VOCs identified in the polluted underground samples providing good sensitivity (LOD between 0.1 and 6.0 ng/mL) and reproducibility (r.s.d. less than 10%).     

The zwitterionic structure of 2‐hydroxy‐4‐[(2‐hydroxybenzylidene)amino]benzoic acid

The title compound, C₁₄H₁₁NO₄, exists in the solid phase in the zwitterionic form, 2‐{[(4‐carboxy‐3‐hydroxyphenyl)iminiumyl]methyl}phenolate, with the H atom from the phenol group on the 2‐hydroxybenzylidene ring transferred to the imine N atom, resulting in a strong intramolecular N—H...O hydrogen bond between the iminium H atom and the phenolate O atom, forming a six‐membered hydrogen‐bonded ring. In addition, there is an intramolecular O—H...O hydrogen bond between the carboxylic acid group and the adjacent hydroxy group of the other ring, and an intermolecular C—H...O contact involving the phenol group and the C—H group adjacent to the imine bond, connecting the molecules into a two‐dimensional network in the (10) plane. π–π stacking interactions result in a three‐dimensional network. This study is important because it provides crystallographic evidence, supported by IR data, for the iminium zwitterionic form of Schiff bases.<!?tpb=12pt>     

A mixed chloride/trifluoromethanesulfonate ligand species in a ruthenium(II) complex

The compound [2‐(aminomethyl)pyridine‐κ²N,N′][chlorido/trifluoromethanesulfonato(0.91/0.09)][(10,11‐η)‐5H‐dibenzo[a,d]cyclohepten‐5‐amine‐κN](triphenylphosphane‐κP)ruthenium(II) trifluoromethanesulfonate dichloromethane 0.91‐solvate, [Ru(CF₃SO₃)_0.09Cl_0.91(C₆H₈N₂)(C₁₅H₁₃N)(C₁₈H₁₅P)]CF₃SO₃·0.91CH₂Cl₂, belongs to a series of Ru^II complexes that had been tested for transfer hydrogenation, hydrogenation of polar bonds and catalytic transfer hydrogenation. The crystal structure determination of this complex revealed disorder in the form of two different anionic ligands sharing the same coordination site, which other spectroscopic methods failed to characterize. The reduced catalytic activity of the title compound was not fully understood until the crystallographic data provided evidence for the mixed ligand species. The crystal structure clearly shows that the majority of the synthesized material has a chloride ligand present. Only a small portion of the material is the expected complex [Ru^II(OTf)(ampy)(η²‐tropNH₂)(PPh₃)]OTf, where OTf is triflate or trifluoromethanesulfonate, ampy is 2‐(aminomethyl)pyridine and tropNH₂ is 5H‐dibenzo[a,d]cyclohepten‐5‐amine.     

A concise and stereoselective chemoenzymatic synthesis of Sitophilate,the male-produced aggregation pheromone of Sitophilus granarius (L.)

(2S,3R)-Sitophilate, the male-produced aggregation pheromone of the granary weevil Sitophilus granarius (L.) was prepared stereoselectively using a novel chemoenzymatic approach in 50% overall yield. The synthetic design was based on an enantioselective fungal reduction of ethyl 2-methyl-3-oxopentanoate with a strain of Aureobasidium pullulans (CCM H1), followed by a Mitsunobu inversion at C3. The last step in the synthetic sequence was a lipase-mediated transesterification using the commercially available Candida antarctica B lipase (CaL B, Novozym 435) using microwave irradiation under solvent-free conditions.     

Thermal, rheological, and structural behaviors of natural and modified cassava starch granules, with sodium hypochlorite solutions

The use of chemically modified starches is widely accepted in various industries, with several applications. In this research, natural cassava starch granules were treated with standard sodium hypochlorite solution at 0.8, 2.0, and 5.0 g Cl/100 g starch. The native and modified starch samples were investigated by means of the following techniques: simultaneous thermogravimetry–differential thermal analysis, which allowed us to verify the thermal decomposition associated with endothermic or exothermic phenomena; and differential scanning calorimetry that was used to determine gelatinization enthalpy as well as the rapid viscoamylographic analysis that provided the pasting temperature and viscosity. By means of non-contact-atomic force microscopy method and X-ray powder patterns diffractometry, it was possible to observe the surface morphology, topography of starch granules, and alterations in the granules’ crystallinity.     

Electrochemical Determination of Sunscreens Agents in Cosmetic Using Square Wave Voltammetry

Sunscreen agents and in particular UV filters are compounds added in different cosmetic formulations, that has the function of preventing damage caused by sun exposition. Therefore, this paper proposes the development of a simple, fast and reliable electroanalytical method utilizing square wave voltammetry (SWV) to the determination of Benzophenone‐3 (BZ‐3), camphor 4‐methylbenzylidene (MBC) and 2‐ethylhexyl‐4‐methoxycinnamate (OMC) in cosmetic samples. The electrochemical system consisted of a cell with three electrodes: work – gold electrode modified, reference – Ag/AgCl_(sat) and auxiliary – platinum, using as supporting electrolyte 4.0 mL of Britton Robinson Buffer 0.04 mol L^?1 (pH=4.0), 1.0 mL of methanol and 5.50×10^?4 mol L^?1 of cetyltrimethylammonium bromide (CTAB). The method was validated using three commercial sunscreen samples and the results showed recovery values between 83 and 98 %. The average values found for the analysed samples were 3.49 % m/m (728 mg L^?1) to BZ‐3, 0.56 % m/m (113 mg L^?1) to MBC and 0.99 % m/m (208 mg L^?1) to OMC. The detection (DL) and quantification (QL) limits were 0.47 mg L^?1 and 1.56 mg L^?1 to BZ‐3, 0.77 mg L^?1 and 2.58 mg L^?1 to MBC and 0.78 mg L^?1 and 2.59 mg L^?1 to OMC, respectively. The sunscreen protector samples were also evaluated by high‐performance liquid chromatography (HPLC) demonstrating a good correlation between the results and compared the results with allowed concentration.     

Performance of density functional theory in computing nonresonant vibrational (hyper)polarizabilities

A set of exchange‐correlation functionals, including BLYP, PBE0, B3LYP, BHandHLYP, CAM‐B3LYP, LC‐BLYP, and HSE, has been used to determine static and dynamic nonresonant (nuclear relaxation) vibrational (hyper)polarizabilities for a series of all‐trans polymethineimine (PMI) oligomers containing up to eight monomer units. These functionals are assessed against reference values obtained using the Møller–Plesset second‐order perturbation theory (MP2) and CCSD methods. For the smallest oligomer, CCSD(T) calculations confirm the choice of MP2 and CCSD as appropriate for assessing the density functionals. By and large, CAM‐B3LYP is the most successful, because it is best for the nuclear relaxation contribution to the static linear polarizability, intensity‐dependent refractive index second hyperpolarizability, static second hyperpolarizability, and is close to the best for the electro‐optical Pockels effect first hyperpolarizability. However, none of the functionals perform satisfactorily for all the vibrational (hyper)polarizabilities studied. In fact, in the case of electric field‐induced second harmonic generation all of them, as well as the Hartree–Fock approximation, yield the wrong sign. We have also found that the Pople 6–31+G(d) basis set is unreliable for computing nuclear relaxation (hyper)polarizabilities of PMI oligomers due to the spurious prediction of a nonplanar equilibrium geometry. © 2013 Wiley Periodicals, Inc.     

Cloud point extraction of vanadium in parenteral solutions using a nonionic surfactant (PONPE 5.0) and determination by flow injection-inductively coupled plasma optical emission spectrometry

A preconcentration and determination methodology for vanadium at trace levels in parenteral solutions was developed. Cloud point extraction was successfully employed for the preconcentration of vanadium prior to inductively coupled plasma atomic optical emission spectrometry (ICP-OES) coupled to a flow injection (FI) system. The vanadium was extracted as vanadium-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol [V-(5-Br-PADAP)] complex, at pH 3.7 mediated by micelles of the nonionic surfactant polyoxyethylene (5.0) nonylphenol (PONPE 5.0). The extracted surfactant-rich phase (100 mul) was mixed with 100 mul of ethanol and this final volume injected into ICP-OES for the vanadium determination. Under these conditions, the 50 ml sample solution preconcentration allowed raising an enrichment factor of 250-fold; however, it was possible to obtain a theoretical enrichment factor of 500-fold. The lower limit of detection (LOD) obtained under the optimal conditions was 16 ng l(-1). The precision for 10 replicate determinations at the 2.0 mug l(-1) V level was 2.3% relative standard deviation (RSD), calculated with the peak heights. The calibration graph using the preconcentration system for vanadium was linear with a correlation coefficient of 0.9996 at levels near the detection limits up to at least 50 mug l(-1). The method was successfully applied to the determination of vanadium in parenteral solution samples.     

Synthesis and characterization of trifluoromethyl fluoroformyl peroxycarbonate,CF3OC(O)OOC(O)F

The synthesis of CF(3)OC(O)OOC(O)F is accomplished by the photolysis of a mixture of (CF(3)CO)(2)O, FC(O)C(O)F, CO, and O(2) at -15 degrees C using a low-pressure mercury lamp. The new peroxide is obtained in pure form in low yield after repeated trap-to-trap condensation and is characterized by NMR, IR, Raman, and UV spectroscopy. Geometrical parameters were studied by ab initio methods [B3LYP/6-311+G(d)]. At room temperature, CF(3)OC(O)OOC(O)F is stable for many days in the liquid or gaseous state. The melting point is -87 degrees C, and the boiling point is extrapolated to 45 degrees C from the vapor pressure curve log p = 8.384 - 1715/T (p/mbar, T/K). A possible mechanism for the formation of CF(3)OC(O)OOC(O)F is discussed, and its properties are compared with those of related compounds.