Dendrimer‐like miktoarm star terpolymers: A3‐(B‐C)3 via click reaction strategy

Two samples of dendrimer‐like miktoarm star terpolymers: (poly(tert‐butyl acrylate))₃‐(polystyrene‐poly(ε‐caprolactone))₃ (PtBA)₃‐(PS‐PCL)₃, and (PS)₃‐(PtBA‐poly(ethylene glycol)₃ were prepared using efficient Cu catalyzed Huisgen cycloaddition (click reaction). As a first step, azido‐terminated 3‐arm star polymers PtBA and PS as core (A) were synthesized by atom transfer radical polymerization (ATRP) of tBA and St, respectively, followed by the conversion of bromide end group to azide. Secondly, PS‐PCL and PtBA‐PEG block copolymers with alkyne group at the junction as peripheral arms (B‐C) were obtained via multiple living polymerization mechanisms such as nitroxide mediated radical polymerization (NMP) of St, ring opening polymerization (ROP) of ε‐CL, ATRP of tBA. Thus obtained core and peripheral arms were linked via click reaction to give target (A)₃‐(B‐C)₃ dendrimer‐like miktoarm star terpolymers. (PtBA)₃‐(PS‐PCL)₃ and (PS)₃‐(PEG‐PtBA)₃ have been characterized by GPC, DSC, AFM, and SAXS measurements. (PtBA)₃‐(PS‐PCL)₃ did not show any self‐organization with annealing due to the miscibility of the peripheral arm segments. In contrast, the micro‐phase separation of the peripheral arm segments in (PS)₃‐(PtBA‐PEG)₃ resulted in self‐organized phase‐separated morphology with a long period of ～ 13 nm. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5916–5928, 2008     

One‐pot preparation of 3‐miktoarm star terpolymers via click [3 + 2] reaction

The preparation of 3‐miktoarm star terpolymers using nitroxide mediated radical polymerization (NMP), ring opening polymerization (ROP), and click reaction [3 + 2] are carried out by applying two types of one‐pot technique. In the first one‐pot technique, NMP of styrene (St), ROP of ε‐caprolactone (ε‐CL), and [3 + 2] click reaction (between azide end‐functionalized poly(ethylene glycol) (PEG‐N₃)/or azide end‐functionalized poly(methyl methacrylate) (PMMA‐N₃) and alkyne) are carried out in the presence of 2‐(hydroxymethyl)‐2‐methyl‐3‐oxo‐3‐(2‐phenyl‐2‐(2,2,6,6‐tetramethylpiperidin‐1‐yloxy)ethoxy) propyl pent‐4‐ynoate, 2 , as an initiator for 48 h at 125 °C (one‐pot/one‐step). As a second technique, NMP of St and ROP of ε‐CL were conducted using 2 as an initiator for 20 h at 125 °C, and subsequently PEG‐N₃ or azide end‐functionalized poly(tert‐butyl acrylate (PtBA‐N₃) was added to the polymerization mixture, followed by a click reaction [3 + 2] for 24 h at room temperature (one‐pot/two‐step). The 3‐miktoarm star terpolymers, PEG‐poly(ε‐caprolactone)(PCL)‐PS, PtBA‐PCL‐PS and PMMA‐PCL‐PS, were recovered by a simple precipitation in methanol without further purification. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3588–3598, 2007     

ABCD 4‐miktoarm star quarterpolymers using click [3 + 2] reaction strategy

Two samples of ABCD 4‐miktoarm star quarterpolymer with A = polystyrene (PS), B = poly(ε‐caprolactone) (PCL), C = poly(methyl methacrylate) (PMMA) or poly(tert‐butyl acrylate) (PtBA), and D = poly(ethylene glycol) (PEG) were prepared using click reaction strategy (Cu(I)‐catalyzed Huisgen [3 + 2] reaction). Thus, first, predefined block copolymers of different polymerization routes, PS‐b‐PCL with azide and PMMA‐b‐PEG and PtBA‐b‐PEG copolymers with alkyne functionality, were synthesized and then these blocks were combined together in the presence of Cu(I)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a catalyst in DMF at room temperature to give the target 4‐miktoarm star quarterpolymers. The obtained miktoarm star quarter polymers were characterized by GPC, NMR, and DSC measurements. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1218–1228, 2008     

Rapid Hyperbranched Polythioether Synthesis Through Thiol-Michael Addition Reaction

In this study, two types of hyperbranched (HB) polythioether could readily be achieved in a short time at ambient temperature through a thiol-Michael addition reaction. Dimethyl acetylenedicarboxylate (DMADC) or methyl propiolate (A₂) and trimethylolpropane tris(3-mercaptopropionate) (B₃) monomers were reacted using an organobase 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) as a catalyst in chloroform at room temperature to provide subsequent HB polythioethers. The effect of TBD concentration on the polymerization was studied for the DMDAC case monitoring the molecular weight evolution against time. HB polythioethers were characterized using spectroscopic (nuclear magnetic resonance) and chromatographic (gel permeation chromatography with refractive index and light-scattering detectors) techniques. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 824–830     

Photon production at c.m. energies of 200 and 900 GeV

We present data on photon production in non single-diffractivep \(\bar p\) -collisions at c.m. energies of 200 and 900 GeV. Besides the general properties of photon production, i.e. pseudorapidity distribution and average multiplicity, we also investigate photon-charged two-particle pseudorapidity and multiplicity correlations. We find for the average number of photons in non single-diffractivep \(\bar p\) -collisions 22.2±1.4±2.0 at 200 GeV and 41.4±2.1±3.5 at 900 GeV, where the first error is statistical and the second systematic. The analysis of photon-charged particle multiplicity correlations reveals strong positive correlations between the average number of photons and the number of simultaneously produced charged particles, as expected from FNAL and ISR studies and from our result at 546 GeV. We obtain for the correlation slope 0.95±0.08±0.11 at 200 GeV and 1.09±0.09±0.13 at 900 GeV (first error is statistical and the second systematic). The investigation of photon-charged two-particle pseudorapidity correlations shows that these correlations are of short range and compatible with the observed charged two-particle pseudorapidity correlations. These correlations and the results for the average number of photons as a function of the produced number of charged particles favour the conclusion that photon sources other than π⁰ s contribute significantly to the observed photon yield in non single-diffractivep \(\bar p\) -collisions. For example, if all photons are assumed to come from π⁰ s and η mesons, a η/π⁰ ratio of about 20% is inferred.     

Neutrino and astroparticle physics: Working group report

The contributions made to the Working Group activities on neutrinos and astrophysics are summarized in this article. The topics discussed were inflationary models in Raman-Sundrum scenarios, ultra high energy cosmic rays and neutrino oscillations in 4 flavour and decaying neutrino models.     

Scaling of pseudorapidity distributions at c.m. energies up to 0.9 TeV

New data are presented on charged particle pseudorapidity distributions for inelastic events produced at c.m. energies \(\sqrt s \) =200 and 900 GeV. The data were obtained at the CERN antiproton-proton Collider operated in a new pulsed mode. The rise of the central density ρ(0) at energies up to \(\sqrt s \) =900 GeV has been studied. A new form of central region scaling is found involving the densityρ _n (0) for charged multiplicityn, namely that the scaled central densityρ _n (0)/ρ(0) expressed as a function ofz=n/〈n〉 is independent ofs. Scaling in the fragmentation region holds to 10–20%, and the small amount of scalebreaking observed here could be accommodated within the framework suggested by Wdowcyk and Wolfendale to account for both accelerator and cosmic ray data.     

Capsules with polyurea shells and ionic liquid cores for CO2 capture

Many ionic liquids (ILs) have good solubilities of CO₂ but the high viscosity of ILs makes them cumbersome and kinetically limits gas uptake. Encapsulation of ILs is an effective approach to overcoming these limitations. In capsules with a core of IL, the chemical composition of the shell impacts performance. Here, we report the preparation of capsules with a core of the IL [Bmim][PF₆] and polymer composite shell, then evaluate how the identity of the polymer impacts CO₂ uptake. IL-in-oil Pickering emulsions stabilized by nanosheets are used, with capsules formed by interfacial polymerization between different diamines and diisocyanates (e.g., shells are polyurea and nanosheets). The capsules contain 60–80 wt% IL and the composition was verified using Fourier transform infrared spectroscopy. Optical microscopy, scanning electron microscopy, and particle sizing data showed spherical, discrete capsules with 50–125 μm in diameter. All capsules are stable up to 250°C. Brunauer–Emmett–Teller analysis of CO₂ gas uptake data showed that different polymer compositions led to different CO₂ uptake properties, with capacity ranging from 0.065 to 0.025 moles of CO₂/kg sorbent at 760 torr and 20°C. This work demonstrates that the polymer identity of the shell impacts gas uptake properties and supports that shell composition can tailor performance.     

Synthesis and characterization of multiarm (Benzoin-PS)m-polyDVB star polymer as a polymeric photoinitiator for polymerization of acrylates and methacrylates

In this study, a new benzoin-based multi-arm star polymer was synthesized by using ATRP, and characterization was achieved by spectrophotometric and chromatographic methods. Obtained multiarm (Benzoin-PS)_m-polyDVB star polymer was employed as a polymeric photoinitiator for polymerization of methacrylates and acrylates. Photophysical properties of this initiator were determined by fluorescence and phosphorescence measurements, the phosphorescence lifetime was calculated as 29 ms hence the lowest triplet state nature was n-π* character, and laser flash photolysis technique was additionally used to get more information about triplet state and triplet lifetime which was calculated as 1.34 ms. Photokinetics of difunctional acrylate such as HDDA was studied with a multi-arm (Benzoin-PS)_m-polyDVB star polymeric initiator using Photo-DSC.     

A molecular switch created by in vitro recombination of nonhomologous genes

We have created a molecular switch by the in vitro recombination of nonhomologous genes and subjecting the recombined genes to evolutionary pressure. The gene encoding TEM1 beta-lactamase was circularly permuted in a random fashion and subsequently randomly inserted into the gene encoding Escherichia coli maltose binding protein. From this library, a switch (RG13) was identified in which its beta-lactam hydrolysis activity was compromised in the absence of maltose but increased 25-fold in the presence of maltose. Upon removal of maltose, RG13's catalytic activity returned to its premaltose level, illustrating that the switching is reversible. The modularity of RG13 was demonstrated by increasing maltose affinity while preserving switching activity. RG13 gave rise to a novel cellular phenotype, illustrating the potential of molecular switches to rewire the cellular circuitry.