Studies on the kinetics of polymerization of vinyl acetate by benzoyl peroxide at 60° using pyridine as solvent

Kinetics of Bz₂O₂-initiated polymerization of VAC in pyridine at 60° were investigated. The polymerization was significantly retarded by pyridine. The monomer exponent decreased from 2.5 at a relatively low [Bz₂O₂] (1.0 × 10^?2 M) to 2.0 at [Bz₂O₂] ? 4.0 × 10^?2 M. The observed kinetic features were explained on the basis of degradative chain transfer and copolymerization with pyridine.     

A Validated LC Method for Separation and Quantification of Voriconazole and Its Enantiomer

A simple liquid chromatographic method was developed for the separation and quantification of voriconazole and its enantiomer in drug substance. The separation was achieved on Chiral cel-OD (250 mm × 4.6 mm × 10 μm) using mobile phase consisting of n-hexane and ethanol in the ratio 9:1 (v/v) with a flow rate of 1.0 mL min⁻¹, at 27 °C column temperature and detection at 254 nm with an injection volume of 20 μL. Ethanol was used as diluent. The method is capable of detecting the (2S, 3R) enantiomer down to 0.0075% and can quantify down to 0.021% with respect to sample concentration. The method is rapid and the resolution achieved was about 3.0. This method can be employed for the quantification of (2S, 3R) enantiomer in voriconazole drug substance.     

Surface stabilized nanosized Ce(x)Zr(1-x)O(2) solid solutions over SiO(2): characterization by XRD, Raman, and HREM techniques

Ce(x)Zr(1)(-)(x)O(2) solid solutions deposited over silica surface were investigated by X-ray diffraction (XRD), Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques in order to understand the role of silica support and the temperature stability of these composite oxides. For the purpose of comparison, an unsupported Ce(x)Zr(1)(-)(x)O(2) was also synthesized and subjected to characterization by various techniques. The Ce(x)Zr(1)(-)(x)O(2)/SiO(2) (CZ/S) (1:1:2 mole ratio based on oxides) was synthesized by depositing Ce(x)Zr(1)(-)(x)O(2) solid solution over a colloidal SiO(2) support by a deposition precipitation method and unsupported Ce(x)Zr(1)(-)(x)O(2) (CZ) (1:1 mole ratio based on oxides) was prepared by a coprecipitation procedure, and the obtained catalysts were subjected to thermal treatments from 773 to 1073 K. The XRD measurements disclose the presence of cubic phases with the composition Ce(0.75)Zr(0.25)O(2) and Ce(0.6)Zr(0.4)O(2) in CZ samples, while CZ/S samples possess Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), and Ce(0.5)Zr(0.5)O(2) in different proportions. The crystallinity of these phases increased with increasing calcination temperature. The cell a parameter estimations indicate contraction of ceria lattice due to the incorporation of zirconium cations into the CeO(2) unit cell. Raman measurements indicate the presence of oxygen vacancies, lattice defects, and displacement of oxygen ions from their normal lattice positions in both the series of samples. The HREM results reveal, in the case of CZ/S samples, a well-dispersed nanosized Ce-Zr-oxides over the surface of amorphous SiO(2). The structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic geometry and exhibit high thermal stability. Oxygen storage capacity measurements by a thermogravimetric method reveal a substantial enhancement in the oxygen vacancy concentration of CZ/S sample over the unsupported CZ sample.     

Solvent extraction separation of In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/ with sulphoxides

Solvent extraction studies have been made on some metals: In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/, from ammonium thiocyanate solutions by dialkyl sulphoxides. Separation of these metals from one another can be achieved by suitable choice of the extracted conditions. The nature of the extractable metal species has been elucidated.     

L-proline catalyzed asymmetric transfer aldol reaction between diacetone alcohol and aldehydes

We demonstrate for the first time, L-proline as a chiral catalyst for transfer aldol reaction between aldehydes and diacetone alcohol.     

Flotation-spectrophotometric method for the determination of mercury using iodide and brilliant green

This paper describes a sensitive spectrophotometric method for the determination of mercury, based on the flotation of a mercury iodide-brilliant green complex with cyclohexane at pH 5 and dissolution of the complex in acetone. The absorbance of the complex is measured at 625 nm. Beer's law is obeyed from 4–500 g/l of mercury. The method is highly sensitive ( = 5.96 × 10⁵ 1 mol^–1 cm^–1) and selective, as it is free from interferences by almost all cations and anions in the presence of EDTA. Furthermore, a two-level orthogonal array design as a chemometric method has been used for optimization of the various parameters involved. The method has been successfully applied to paper industry effluents.     

Reductive nitrosylation of tetraoxometallates—XVII. Molybdate-hydroxylamine-cyanide reaction, and synthesis and characterization of K2[Mo(NO)(CN)5] and (NMe4)2[Mo(NO)(CN)4]

A reaction condition is established which determines the nature of the products in the molybdate-hydroxylamine-cyanide reaction. With hydroxylamine always used in excess, it is the hydroxyl ion concentration of the reaction mixture which plays a vital role in determining whether K₄[Mo(NO)(CN)₅] or K₂[Mo(NO)(CN)₅] is obtained exclusively. The latter product is hereby reported for the first time. Its powder diffractogram being typical of a cubic system, a gross structural characterization has been made possible. The former under aqueous, aerobic conditions yields a new product, (NMe₄)₂[Mo(NO)(CN)₄].     

Electron impact and chemical ionization mass spectra of 2,2-diphenyl-3-arylcyclobutanone oximes. Formation of ion m/z 167

The electron impact (EI) and chemical ionization (CI) spectra of 2,2-diphenyl-3-aryl cyclobutanone oximes (1–5) are reported. Formation of diphenylmethyl cation at m/z 167 is a major fragmentation process in both EI and CI spectra. Labelling studies established that the hydrogen involved in this rearrangement transfers from the NOH group and not from cyclobutane ring positions. The [M + 3]⁺ ions are formed under CI conditions as a result of C?N double bond reduction. An interesting secondary kinetic isotope effect is observed in the formation of ion e at m/z 183 in both EI and CI spectra. Other characteristic fragmentation pathways occurring in the EI and CI spectra of these compounds are outlined.     

A new approach for the solid-phase synthesis of pyrrolo[2,1-c][1,4]benzodiazepines involving reductive cleavage

A methodology based on reductive cleavage followed by cyclization, for the solid-phase synthesis of pyrrolo[2,1-c][1,4]benzodiazepines employing DIBAL-H, is described.     

Photopolymerization of methyl methacrylate with the use of bromine as photoinitiator

Low concentrations of bromine (0.008–0.06M) were used to initiate photopolymerization of MMA in bulk and in diluted (near bulk) systems, the diluents or solvents used being benzene, toluene, dioxane, tetrahydrofuran, carbon tetrachloride, chloroform, methylene chloride, and methanol. Polymerization in bulk follows usual free-radical kinetics. Inert solvents (benzene, toluene) as well as the other solvents used enhance the rate of polymerization MMA even when used in the range of catalytic concentrations (0.04–0.4M). An initiation mechanism involving solvent molecules appears to be predominant in diluted systems.