Extraction behavior of uranium(VI), plutonium(IV), zirconium(IV), ruthenium(III) and europium(III) with γ-pre-irradiated solutions of N,N′-methylbutyl substituted amides in n-dodecane

The extraction of plutonium(IV), uranium(VI), zirconium(IV), europium(III) and ruthenium(III) with -pre-irradiated n-dodecane solutions of methylbutyl substituted hexanamide (MBHA), octanamide (MBOA) and decanamide (MBDA) from 3.5M HNO₃ has been studied as a function of absorbed dose up to 184×10⁴ Gray. The distribution ratios (K_d) of uranium(VI) decreased gradually up to a dose of 50×10⁴ Gray and became almost constant thereafter, while ruthenium(III) and europium(III) were not extracted in the entire dose range studied. The K_d values of Pu(IV) decreased gradually up to 10×10⁴ Gray, for MBOA, and 30×10⁴ Gray for MBHA and MBDA and then increased up to a dose of 72×10⁴ Gray, indicating the synergistic effect of radiolytic products at higher doses. The extraction of zirconium(IV) was found to increase gradually up to 72×10⁴ Gray. However, the steep fall in K_d values of plutonium(IV), zirconium(IV) beyond a dose of 72×10⁴ Gray was atrributed to third phase formation. The radiolytic degradation of amides was monitored by quantitative IR spectroscopy and was found to follow the order MBOA>MBDA>MBHA at 184×10⁴ Gray having the amines and carboxylic acids as the main radiolytic products.     

Spectroscopic and biological studies on newly synthesized nickel(II) complexes of semicarbazones and thiosemicarbazones

Nickel(II) complexes, having the general composition Ni(L)2X2, have been synthesized [where L: isopropyl methyl ketone semicarbazone (LLA), isopropyl methyl ketone thiosemicarbazone (LLB), 4-aminoacetophenone semicarbazone (LLC) and 4-aminoacetophenone thiosemicarbazone (LLD) and X=Cl-, 1/2SO(4)2-]. All the Ni(II) complexes reported here have been characterized by elemental analyses, magnetic moments, IR, electronic and mass spectral studies. All the complexes were found to have magnetic moments corresponding to two unpaired electrons. The possible geometries of the complexes were assigned on the basis of electronic and infrared spectral studies. Newly synthesized ligand and its nickel(II) complexes have been screened against different bacterial and fungal growth.     

Electrochemical studies on the composition,stabilities and thermodynamics of Zn+2, Cd+2 and Pb+2 complexes with methylene bis thio acetic acid

Potentiometric and conductometric studies on the zinc, cadmium, lead—methylene bis thio acetic acid system in aqueous media reveal the formation of 1:1 and 1:2 (M:L) complexes in thepH range 3.4–5.1. Their stability constants have been determined at 20°, 30° and 40 °C by applyingCalvin andMelchior's extension ofBjerrum's method. The overall changes in thermodynamic function H, G and S accompanying complexation have been evaluated at 30 °C.

---

Elektrochemische Untersuchungen über Zusammensetzung, Stabilität und Thermodynamik von Zn(II)-, Cd(II)- und Pb(II)-Komplexen mit Methylen-bisthioessigsäure

Zusammenfassung Potentiometrische und konduktometrische Untersuchungen an Zink-, Cadmium- und Blei-Methylen-bis-thioessigsäure-Systemen in wäßrigem Medium zeigten die Bildung von 1:1 und 1:2 (M:L)-Komplexen impH-Bereich 3,4–5,1. Die Stabilitätskonstanten wurden bei 20°, 30° und 40 °C mittels derCalvin-Melchior-Methode (erweiterteBjerrum-Methode) bestimmt. Die thermodynamischen Parameter H, G und S der Komplexierung wurden für 30 °C ermittelt.

     

Determination of 1,3-benzodioxanes in Piper mullesua by high-performance thin-layer chromatography

A new, simple, precise, and rapid high-performance thin-layer chromatographic method was developed for the determination of 6 benzodioxanes in Piper mullesua extract: 1',3'-benzodioxole-5'-(2,4,8-triene-isobutyl nonanoate), 1',3'-benzodioxole-5'-(2,4,12-triene-isobutyl tridecanoate), fargesin, sesamin, asarinin, 1',3'-benzodioxole-5'-(2,4,8-triene-methyl nonanoate). The ingredients were separated on a precoated Silica Gel 60 F254 plate with a solvent system of toluene-acetone (92 + 8). The 6 benzodioxanes were well separated and easily identified in this chromatographic system. The separated benzodioxanes were visualized by color development with a spray reagent consisting of 1 g vanillin dissolved in 100 mL H2SO4-ethanol (5 + 95, v/v). Quantitation was performed by scanning the spots and comparing the integrated areas of compounds in samples with those of standards. Recoveries from samples spiked with known amounts of the benzodioxanes were excellent. The results were comparable with those estimated by liquid chromatography.     

Role of dimethyl sulfoxide as a solvent for vinyl polymerization

Dimethyl sulfoxide has been used as a solvent in the polymerization of methyl methacrylate and styrene. The chain-transfer coefficients of the solvent and the values of δ [i.e., (2k_t)^1/2/k_p] in solvent-monomer mixtures of various compositions were determined. δ was observed to be dependent on the solvent concentration in the case of methyl methacrylate but remained constant in case of styrene. The lowering of the values of δ with increasing solvent concentration in case of methyl methacrylate has been attributed to an interaction between the solvent and poly(methyl methacrylate) radical resulting in lower termination rate.     

Heat-resistant polymers from melt-processable bisimido-bisphthalonitriles

Heat-resistant polymers which are processable into void-free components and suitable for composite applications have been synthesized by thermal/chemical polymerization of four newly developed bisimido-bisphthalonitriles containing silicon, ether, carbonyl, and hexafluoroisopropylidene groups. Thermal polymerization involving addition reactions was performed at 200–275°C for 2–10 h and then post-curing at 310°C for 10 h. Polymers VI, VII, VIII , and IX were obtained. The thermal polymerization was monitored using infrared spectroscopy. Thermal polymerization was also carried out in the presence of an aromatic diamine. A polyhexasocyclane ( V ) was synthesized by condensation polymerization of ether containing bisimido-bisphthalonitrile with 4,4′-diaminodiphenyl ether in solvent phenol. The synthesized polymers were evaluated for thermal stability using dynamic thermogravimetric analysis (TGA). Polymers VII, VIII, IX , and X showed thermal decomposition temperature in the range of 475–500°C in nitrogen and air atmosphere. The char yield of the polymers was in the range of 60–69% in nitrogen at 800°C. This study indicated that synthesized thermosetting polymers from ether and keto containing bisimido-bisphthalo-nitrile are potential candidates for development of graphite composites. © 1993 John Wiley & Sons, Inc.     

Time-resolved spectroscopy of solid poly(1-vinyl naphthalene)following electron beam pulse radiolysis: pulse radiolytic studies on polymers

Transient emission studies following pulse radiolysis of solid poly(1-vinyl naphthalene) show existence of excited monomers and two excimers. Quenching experiments indicate that excimers are not formed directly by recombination of ions but probably by trapping of migrating monomeric excitation in performed traps whose density is approximately one in 10³.     

Synthesis and spectral characterization of some oxo-centered,trinuclear mixed-valence iron thiocarboxylates

Some mixed-valence Fe(II) Fe(III) complexes of thiocarboxylic acids and straight chain fatty acids with general formula [Fe(II)Fe(III)(2)O(SOCR)(6)(H(2)O)(3)] and [Fe(II)Fe(III)(2)O(SOCR)(3)(OOCR')(3)(CH(3)OH)(3)] (where, R=CH(3) or C(6)H(5) and R'=C(13)H(27), C(15)H(31) or C(17)H(35)) were synthesized and characterized by elemental analyses, spectral (infrared, electronic and M?ssbauer) studies, molar conductance and magnetic susceptibility measurements. The infrared spectra suggested bridging nature of carboxylate and thiocarboxylate anions along with upsilon(asym)(Fe(3)O) vibrations in the complexes. M?ssbauer studies revealed two resolved quadrupole doublets at 120-315 K confirming the presence of Fe(II) and Fe(III) moieties in the complexes. This was supported by the observed electronic spectral bands in the complexes at room temperature. The spectrum showed a band at around 13,800 cm(-1) which indicated an intervalence-transfer. Magnetic susceptibility measurements showed weak antiferromagnetic coupling related to mixed-valence pairs with S(2)=2, em leader S(1)=S(3)=5/2 spin exchange model. Conductance data indicated, the complexes were non-electrolytes in nitrobenzene. A structure has been established on the basis of these studies.     

Characterization of oligosaccharide moieties of intact glycoproteins by microwave-assisted partial acid hydrolysis and mass spectrometry

A method, which utilizes microwave-assisted partial acid hydrolysis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS), to elucidate oligosaccharide composition of intact glycoproteins is presented here. Glycoproteins, such as ribonuclease B, avidin, alpha1-acid glycoprotein, and fetuin, are used as model systems to demonstrate this technique. Partial cleavage of oligosaccharides from whole intact glycoproteins with trifluoroacetic acid was observed after a short exposure to microwaves. Due to the high-resolution mass spectra obtained by MALDI-TOFMS from glycoproteins with molecular weights less than 20 kDa, the compositions of oligosaccharides are readily derived for ribonuclease B and avidin. The data agree with the proposed oligosaccharide structures of ribonuclease B (five glycoforms) and avidin (eight glycoforms). Larger glycoproteins such as alpha1-acid glycoprotein (many glycoforms) and fetuin (many glycoforms) exhibited only broad peaks with no glycoform resolution. Nevertheless, this method can be used successfully for analysis of glycoproteins with molecular weights greater than 20 kDa to determine the presence or absence of glycosylation.