催化反应—导数示波极谱法测定痕量钨

在盐酸介质中，痕量钨对钛（Ⅲ）还原金莲花橙的缓慢反应有强烈催化作用，在ＮａＯＨ介质莲花橙Ｏ于－０．５０Ｖｖｓ．ＳＣＥ产生一灵敏的导数示波极谱波。据此，建立了一定检测限和测定范围分别为０．８ｎｇ／ｍＬ和１．６－８０ｍｇ／ｍＬＷ的催化反应－示波极谱新方法，用于钢和矿样中钨的测定，获得满意结果。     

分子反应动力学如何走向21世纪

分子反应动力学领域正在发展之中,还远未进入成熟期。有些课题,如涉及对化学反应性基本理解方面的飞秒化学、立体化学动力学、态一态化学、选模化学以及有关新反应类型方面的团簇化学动力学、自由基反应动力学、气一固表面反应动力学等皆处于它们发展的中间阶段。另外有些课题,如激光控制化学反应,则仅处于初创阶段。它们如何进入21世纪呢?我们建议将来应该研究如下课题:(1)飞秒化学及立体态一态动力学;(2)激光控制化学反应;(3)团簇形成规律、结构及动力学;(4)分子高振动激发态光谱、自由基光谱及动力学;(5)理论研究。本文对上述课题给予简要的讨论。     

Electrocatalytically Active Fe‐(O‐C2)4 Single‐Atom Sites for Efficient Reduction of Nitrogen to Ammonia

Single‐atom catalysts have demonstrated their superiority over other types of catalysts for various reactions. However, the reported nitrogen reduction reaction single‐atom electrocatalysts for the nitrogen reduction reaction exclusively utilize metal–nitrogen or metal–carbon coordination configurations as catalytic active sites. Here, we report a Fe single‐atom electrocatalyst supported on low‐cost, nitrogen‐free lignocellulose‐derived carbon. The extended X‐ray absorption fine structure spectra confirm that Fe atoms are anchored to the support via the Fe‐(O‐C₂)₄ coordination configuration. Density functional theory calculations identify Fe‐(O‐C₂)₄ as the active site for the nitrogen reduction reaction. An electrode consisting of the electrocatalyst loaded on carbon cloth can afford a NH₃ yield rate and faradaic efficiency of 32.1 μg h^?1 mg_cat.^?1 (5350 μg h^?1 mg_Fe^?1) and 29.3 %, respectively. An exceptional NH₃ yield rate of 307.7 μg h^?1 mg_cat.^?1 (51 283 μg h^?1 mg_Fe^?1) with a near record faradaic efficiency of 51.0 % can be achieved with the electrocatalyst immobilized on a glassy carbon electrode.     

斯特林用直线压缩机的研究

斯特林直线压缩机的性能决定了斯特林制冷机的性能和寿命,阐述了动圈式和动磁式斯特林用直线压缩机的发展及结构特点,并介绍了斯特林直线压缩机的设计计算模型,给出了电机效率与动子质量和角频率的关系,这是斯特林直线压缩机设计的重要控制指标。     

Temperature-dependent structural changes of[Bmim]FeCl4 magnetic ionic liquid characterized by an in-situ X-ray absorption fine structure

The temperature-dependent structural changes in 1-butyl-3-methylimidazolium tetrafluoride([Bmim]FeCl4)magnetic ionic liquid(MIL)were investigated by using in-situ X-ray absorption fine structure(XAFS)combined with Raman spectroscopy and DFT calculations.XAFS re sults revealed that the coordination number and bond length of Fe-Cl in the anion of[Bmim]FeCl4 MIL decreased with increments in temperature.These results directly reflected the dissociation of tetrahedral structure[FeCl4]^-,and the formation of bridge-chain[Fe2 Cl5]^+,and[FeCl2]^+species in the anion of[Bmim]FeCl4 MIL.These behaviors indicated that[FeCl4]^-dissociation was endothermic,and was promoted by increased temperature.The results obtained through XAFS were in agreement with those obtained through Raman spectroscopy and DFT calculations.     

Mesoporous Carbon Nanofibers Embedded with MoS2 Nanocrystals for Extraordinary Li‐Ion Storage

MoS₂ nanocrystals embedded in mesoporous carbon nanofibers are synthesized through an electrospinning process followed by calcination. The resultant nanofibers are 100–150 nm in diameter and constructed from MoS₂ nanocrystals with a lateral diameter of around 7 nm with specific surface areas of 135.9 m² g^?1. The MoS₂@C nanofibers are treated at 450 °C in H₂ and comparison samples annealed at 800 °C in N₂. The heat treatments are designed to achieve good crystallinity and desired mesoporous microstructure, resulting in enhanced electrochemical performance. The small amount of oxygen in the nanofibers annealed in H₂ contributes to obtaining a lower internal resistance, and thus, improving the conductivity. The results show that the nanofibers obtained at 450 °C in H₂ deliver an extraordinary capacity of 1022 mA h g^?1 and improved cyclic stability, with only 2.3 % capacity loss after 165 cycles at a current density of 100 mA g^?1, as well as an outstanding rate capability. The greatly improved kinetics and cycling stability of the mesoporous MoS₂@C nanofibers can be attributed to the crosslinked conductive carbon nanofibers, the large specific surface area, the good crystallinity of MoS₂, and the robust mesoporous microstructure. The resulting nanofiber electrodes, with short mass‐ and charge‐transport pathways, improved electrical conductivity, and large contact area exposed to electrolyte, permitting fast diffusional flux of Li ions, explains the improved kinetics of the interfacial charge‐transfer reaction and the diffusivity of the MoS₂@C mesoporous nanofibers. It is believed that the integration of MoS₂ nanocrystals and mesoporous carbon nanofibers may have a synergistic effect, giving a promising anode, and widening the applicability range into high performance and mass production in the Li‐ion battery market.     

Formation at low surfactant concentrations and characterization of mesoporous MCM-41

At low concentrations of cetyltrimethylammonium bromide,all silica-based mesoporous materials with hexagonal phase have been synthesized via interactions between self-assembled surfactant molecule aggregates and aniomc silicate polymers.The resulting materials are characterized by XRD,FT-IR,solid state 29Si MAS NMR,thermal analysis and N2 adsorption-desorption measurements.After soluble ions are removed,the interactors between surfactant micelles and silicate polymers are reorganized and then form mesostructures 1 he hexagonal framework is sonsistent with amorphous silica gel.The structures of materials depend on the synthesis conditions Hydrothermal process improves the interactions between molecules and increases the degree of framework silicon atom polymerization The.surface area and the mesopore volume of the material prepared at 100℃ increase by 87% and 71 %,respectively,compared with those obtained at room temperature.     

The photoisomerization of 11‐cis‐retinal protonated schiff base in gas phase: Insight from spin‐flip density functional theory

This extensive theoretical study employed the spin‐flip density functional theory (SFDFT) method to investigate the photoisomerization of 11‐cis‐retinal protonated Schiff base (PSB11) and its minimal model tZt‐penta‐3,5‐dieniminium cation (PSB3). Our calculated results indicate that SFDFT can perform very well in describing the ground‐ and excited‐state geometries of PSB3 and PSB11. We located the conical intersection (CI) point and constructed the photoisomerization reaction path of PSB3 and PSB11 by using the SFDFT method. To further verify the SFDFT results, we computed the energy profiles along the constructed linearly interpolated internal coordinate (LIIC) pathways by using high‐level theoretical methods, such as the EOM‐CCSD, CR‐EOM‐CCSD(T), CASPT2, NEVPT2, and XMCQDPT2 methods. The SFDFT method predicts that the photoisomerization of PSB3 is barrierless, in accordance with previous complete‐active‐space self‐consistent‐field (CASSCF) results. However, an energy barrier is predicted along the LIIC pathways of PSB11. This finding is different from previous CASSCF results and may indicate that the photoisomerization of PSB11 in gas phase is similar to that in solution. However, the higher spin contamination of the SFDFT method in the vicinity of the CI point caused the located CI geometry to deviate from that of the real CI. In addition, the LIIC pathways are only approximations to the minimum energy path (MEP). Thus, further experimental and theoretical studies are needed to verify the existence of an energy barrier along the photoisomerization reaction path of PSB11 in gas phase. © 2013 Wiley Periodicals, Inc.     

限域NiCo合金纳米颗粒高效催化生物质衍生物水相加氢脱氧

将储量丰富的生物质及其衍生物转化为具有高附加值的燃料和化学品被认为是一种有前景的绿色途径,可以极大地减少人们对传统化石资源的依赖.作为木质纤维素热解的直接产物和生物油升级的模型化合物,香草醛可以通过加氢脱氧(HDO)过程选择性地转化为2-甲氧基-4-甲基苯酚(MMP).MMP是一种有价值的化学品,常用于香料和药物等重要中间体的合成.在过去十年里,大量的金属催化剂被用来催化香草醛HDO转化为MMP.其中,贵金属(Pt,Pd,Ru和Au)虽然活性高,但是其储量低、价格昂贵,不利于工业化应用;而非贵金属(Fe,Co,Ni和Cu)的催化活性普遍较低,需要苛刻的反应条件来提高转化效率和选择性.此外,这类HDO反应大都在有机溶剂中进行,容易造成环境污染.因此,开发高效、稳定的非贵金属催化剂用于水相HDO反应是一个巨大的挑战.一般来说,合金纳米颗粒(NPs)具有强烈的协同效应,能产生良好的配位结构和电子环境,从而显著提升催化活性和选择性.基于此,本文首次采用了一种简单可控的合成方法来制备三聚氰胺海绵负载的氮掺杂碳纳米管(N-CNTs)限域的Ni-Co合金NPs(NiCo@N-CNTs/CMF)催化剂.该催化剂具有优异的HDO性能,在2 MPa H2,120oC反应6 h条件下,能在水相中将生物质衍生的香草醛高效转化为MMP,转化率和选择性均达到100％.相比于单金属的Ni@N-CNTs/CMF和Co@N-CNTs/CMF催化剂,香草醛转化率和MMP选择性都有大幅度的提高.而且,在温和的反应条件下,该催化剂对香草醛衍生物和其他芳香醛类化合物同样表现出优异的HDO性能,拥有100％的转化率以及较高的MMP选择性(91.5％～100％).XPS结果表明,Ni-Co形成合金后发生了电子结构的偏移,即Co原子可以从邻近的Ni原子处得到电子,提高Co电子云密度,从而促进对香草醛中C=O键的吸附.DFT计算结果表明,相比于单金属的Ni和Co,Ni-Co合金化后能显著提高对C=O键的选择性吸附和活化.同时,H2解离后形成的活性H*物种在Ni-Co合金NPs表面更容易脱附并参与催化反应.因此,Ni-Co@N-CNTs/CMF催化剂优异的HDO性能主要是由于Ni-Co合金NPs的协同作用大大促进了其对C=O键的选择性吸附和活化,以及活化氢物种的脱附.本文为设计和制备高效的非贵金属催化剂应用于水相的HDO反应提供了一个新策略.     

热机载荷作用下三维界面裂纹问题的权函数法分析

热机载荷共同作用下双材料和复合材料中的裂纹扩展往往发生在界面处,并且工程中实际遇到的裂纹大多数是三维裂纹.由于通用权函数仅仅与裂纹体的几何形状有关,与载荷、时间无关,因此在求解复杂冲击载荷下界面裂纹应力强度因子随时间的变化过程时,避免了反复的应力分析,计算效率得到提高.根据Betti互易原理,论文推导出三维界面裂纹问题通用权函数法的普遍表达式,并给出了热机载荷共同作用下三维界面Ⅰ型、Ⅱ型和Ⅲ型裂纹问题通用权函数法的有限元格式.通过与实例计算比较,表明此方法得到的结果可以达到满意的工程应用精度.