Cob(I)alamin-Catalyzed Skeletal Migrations Observed during the Reduction of 4β-(tert-Butyl)-1α-(1-methylvinyl)cyclohexanecarbaldehyde

The cob(I) alamin (1(I)) -catalyzed² transformation of the aldehyde 2 has been studied (cf. Table 1). Kinetic examinations showed a rapid isomerization of 2 to 3 (cf. Fig. 1 and 2). From the transformations in glacial AcOH, the two cyclopropanols 5 and 7 were isolated as main products (cf. Tables 1–3 and Fig. 1 and 2). Using large amounts of 1(I) , the aldehyde 4 was very slowly transformed. Accepting the intermediate formation of 6 interconnected Co-complexes, i. e. A , B , C , D , E and F (cf. Scheme), the generation of all the products observed can be explained.     

Excited-state intramolecular proton transfer in o-hydroxybiaryls: a new route to dihydroaromatic compounds

An excited-state intramolecular proton transfer (ESIPT) from the phenol OH to the 7'-carbon on the naphthyl ring in o-(1-naphthyl)phenol (3) and 1-(1'-naphthyl)-2-naphthol (4) leads to efficient (Phi = 0.1-0.2) formation of the corresponding dihydrobenzoxanthenes (5 and 7) via quinone methide intermediates. This new reaction represents a clean, efficient, and high-yielding route to benzoxanthenes and dihydrobenzoxanthenes. A related ESIPT of similar efficiency has been detected at the 2'-aromatic position in these systems, by deuterium labeling studies.     

Excited state intramolecular redox reaction of 2-(hydroxymethyl)anthraquinone in aqueous solution

The title compound undergoes a novel excited state intramolecular redox reaction in which the 'distal' side chain benzylic alcohol is oxidized to the aldehyde and the carbonyl moieties of anthraquinone reduced, with evidence suggesting that the primary photochemical process is a deprotonation of the benzylic C-H proton (by water) mediated by the solvent.     

Retroracemization using new forms of Belokon's original ligand: ­intermediate NiII complexes of N‐({2‐[N‐(S)‐alkylprolylamino]phenyl}phenylmethylene)‐(S)‐phenylalanine (alkyl is 2‐picolyl, 3‐picolyl or ethyl)

In the title compounds, [N‐(phenyl{2‐[N‐(S)‐(2‐picolyl)­prolyl­amino]­phenyl}methyl­ene)‐(S)‐phenyl­alaninato]­nickel(II), [Ni(C₃₃H₃₀N₄O₃)], (I), [N‐(phenyl{2‐[N‐(S)‐(3‐picolyl)­prolyl­amino]­phenyl}methyl­ene)‐(S)‐phenyl­alaninato]­nickel(II) hemihydrate, [Ni(C₃₃H₃₀N₄O₃)]·0.5H₂O, (II), and [N‐({2‐[N‐(S)‐ethyl­prolyl­amino]­phenyl}phenyl­methyl­ene)‐(S)‐phenyl­ala­nin­ato]­nickel(II), [Ni(C₂₉H₂₉N₃O₃)], (III), the Ni^II centres have approximate square‐planar coordination geometries from N₃O donor sets. The picolyl N atoms in (I) and (II) are too remote from the metal centres to interact significantly, but the metal coordination geometries experience tetrahedral distortion and/or displacement of the metal centre from the N₃O plane. These are linked to conformational differences between the ligands of the symmetry‐independent complexes (Z′ = 2), which in turn are related to molecular packing. In (III), where a less sterically demanding ethyl group replaces the picolyl substituents, there are none of the distortions or displacements seen in (I) and (II).     

Reaction mechanisms and structural characterization of the reactive intermediates observed after the photolysis of 3-(hydroxymethyl)benzophenone in acetonitrile, 2-propanol, and neutral and acidic aqueous solutions

Nanosecond time-resolved resonance Raman (ns-TR(3)) spectroscopy was employed to investigate the photoinduced reactions of 3-(hydroxymethyl)benzophenone (1) in acetonitrile, 2-propanol, and neutral and acidic aqueous solutions. Density functional theory calculations were utilized to help the interpretation of the experimental spectra. In acetonitrile, the neutral triplet state 1 [denoted here as (m-BPOH)(3)] was observed on the nanosecond to microsecond time scale. In 2-propanol this triplet state appeared to abstract a hydrogen atom from the solvent molecules to produce the aryphenyl ketyl radical of 1 (denoted here as ArPK of 1), and then this species underwent a cross-coupling reaction with the dimethylketyl radical (also formed from the hydrogen abstraction reaction) to form a long-lived light absorbing transient species that was tentatively identified to be mainly 2-(4-(hydroxy(3-(hydroxymethyl)phenyl)methylene)cyclohexa-2,5-dienyl)propan-2-ol. In 1:1 H(2)O:CH(3)CN aqueous solution at neutral pH, (m-BPOH)(3) reacted with water to produce the ArPK of 1 and then underwent further reaction to produce a long-lived light absorbing transient species. Three photochemical reactions appeared to take place after 266 nm photolysis of 1 in acidic aqueous solutions, a photoreduction reaction, an overall photohydration reaction, and a novel photoredox reaction. TR(3) experiments in 1:1 H(2)O:CH(3)CN aqueous solution at pH 2 detected a new triplet biradical species, which is associated with an unusual photoredox reaction. This reaction is observed to be the predominant reaction at pH 2 and seems to face competition from the overall photohydration reaction at pH 0.     

新型含氟聚芳醚酮的合成与表征

聚芳醚酮具有很高的热稳定性和优良的电性能及机械性能 ,已经被广泛应用于宇航、电子及核能等高技术领域 [1] .氟元素的引入可以降低材料介电常数、折光指数和吸水率 ,提高热稳定性、溶解性和阻燃性 ,增加材料透明度 ,使这类聚合物在光电子、光学和微电子等应用领域的研究倍受关注 [2～ 4 ] .本文在合成含三氟甲基苯侧基的聚芳醚酮 [5] 的基础上 ,设计并合成了新型的含氟量更高的单体和聚合物 ,并对其性能进行了初步研究 .1　实验部分1 .1　试剂与仪器　 [3,5 -二 (三氟甲基 ) ]苯代对苯醌 (自制 ) ;锌粉 ,A.R.级 ,天津化学试剂一厂产品 ;…     

石墨消解-电感耦合等离子体质谱(ICP-MS)法测定铜精矿中汞的含量

称取0.2g样品于50mL样品管中,以5mL硝酸-盐酸(1∶1)混合溶液为溶剂,采用石墨消解仪对样品进行前处理。以159 Tb作内标元素补偿基体效应,用电感耦合等离子体质谱(ICP-MS)法对铜精矿中的202 Hg进行测定。结果显示,在0～50μg/L的浓度范围内,校准曲线线性相关系数在0.999 9以上,方法检出限0.019μg/L。对铜精矿标准样品的检测结果与标准值相符。铜精矿中汞的浓度在0.94～15.06μg/g时,与直接测汞仪检测结果对比基本一致。     

Amorphous Metal–Organic Framework‐Dominated Nanocomposites with Both Compositional and Structural Heterogeneity for Oxygen Evolution

Amorphous metal–organic frameworks (aMOFs) are an emerging family of attractive materials with great application potential, however aMOFs are usually prepared under harsh conditions and aMOFs with complex compositions and structures are rarely reported. In this work, an aMOF‐dominated nanocomposite (aMOF‐NC) with both structural and compositional complexity has been synthesized using a facile approach. A ligand‐competition amorphization mechanism is proposed based on experimental and density functional theory calculation results. The aMOF‐NC possesses a core–shell nanorod@nanosheet architecture, including a Fe‐rich Fe‐Co‐aMOF core and a Co‐rich Fe‐Co‐aMOF shell in the core–shell structured nanorod, and amorphous Co(OH)₂ nanosheets as the outer layer. Benefiting from the structural and compositional heterogeneity, the aMOF‐NC demonstrates an excellent oxygen evolution reaction activity with a low overpotential of 249 mV at 10.0 mA cm^?2 and Tafel slope of 39.5 mV dec^?1.     

Highly efficient electrocatalytic hydrogen evolution promoted by O–Mo–C interfaces of ultrafine β-Mo2C nanostructures

Optimizing interfacial contacts and thus electron transfer phenomena in heterogeneous electrocatalysts is an effective approach for enhancing electrocatalytic performance. Herein, we successfully synthesized ultrafine β-Mo₂C nanoparticles confined within hollow capsules of nitrogen-doped porous carbon (β-Mo₂C@NPCC) and found that the surface layer of molybdenum atoms was further oxidized to a single Mo–O surface layer, thus producing intimate O–Mo–C interfaces. An arsenal of complementary technologies, including XPS, atomic-resolution HAADF-STEM, and XAS analysis clearly reveals the existence of O–Mo–C interfaces for these surface-engineered ultrafine nanostructures. The β-Mo₂C@NPCC electrocatalyst exhibited excellent electrocatalytic activity for the hydrogen evolution reaction (HER) in water. Theoretical studies indicate that the highly accessible ultrathin O–Mo–C interfaces serving as the active sites are crucial to the HER performance and underpinned the outstanding electrocatalytic performance of β-Mo₂C@NPCC. This proof-of-concept study opens a new avenue for the fabrication of highly efficient catalysts for HER and other applications, whilst further demonstrating the importance of exposed interfaces and interfacial contacts in efficient electrocatalysis.

Ultrafine β-Mo₂C nanostructures encapsulated in N-doped carbon capsules featuring O–Mo–C interfaces as the active sites for HER have been unveiled.     

One‐step electrodeposition of amorphous carbon films containing WO3 with high conductivity and good wettability

Tungsten trioxide‐incorporated hydrogenated amorphous carbon (WO₃/a‐C:H) films have been fabricated on a single‐crystal silicon wafer by liquid phase electrodeposition using methanol as carbon source and tungsten carbonyl as incorporated reagent. The morphology, composition and structure of the films have been investigated by SEM, XPS, Raman scattering spectroscopy, Fourier transform infrared spectroscopy (FTIR) and Transmission electron microscope (TEM), respectively. The effects of WO₃ incorporation on the electrical and wetting properties were studied in detail. The characterization results showed that tungsten trioxide nanocrystalline particles with diameters in the range of 10–20 nm were homogenously embedded in the amorphous carbon films. Also, the electrical conductivity and wetting ability of the films were strongly improved due to the contribution of the tungsten trioxide. Copyright © 2010 John Wiley & Sons, Ltd.