Preparative isolation and purification of lutein from the microalga chlorella vulgaris by high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) was applied to the isolation and purification of lutein from microalgae. Analytical HSCCC was used for the preliminary selection of a suitable solvent system composed of n-hexane-ethanol-water (4:3:1, v/v). Using the above solvent system, preparative HSCCC was successfully performed yielding lutein at 98% purity from 200 mg of the crude extract in a one-step separation.     

Prediction of soil organic carbon partition coefficients by soil column liquid chromatography

To avoid the limitation of the widely used prediction methods of soil organic carbon partition coefficients (KOC) from hydrophobic parameters, e.g., the n-octanol/water partition coefficients (KOW) and the reversed phase high performance liquid chromatographic (RP-HPLC) retention factors, the soil column liquid chromatographic (SCLC) method was developed for KOC prediction. The real soils were used as the packing materials of RP-HPLC columns, and the correlations between the retention factors of organic compounds on soil columns (ksoil) and KOC measured by batch equilibrium method were studied. Good correlations were achieved between ksoil and KOC for three types of soils with different properties. All the square of the correlation coefficients (R2) of the linear regression between log ksoil and log KOC were higher than 0.89 with standard deviations of less than 0.21. In addition, the prediction of KOC from KOW and the RP-HPLC retention factors on cyanopropyl (CN) stationary phase (kCN) was comparatively evaluated for the three types of soils. The results show that the prediction of KOC from kCN and KOW is only applicable to some specific types of soils. The results obtained in the present study proved that the SCLC method is appropriate for the KOC prediction for different types of soils, however the applicability of using hydrophobic parameters to predict KOC largely depends on the properties of soil concerned.     

Influence of moderate Joule heating on electroosmotic flow velocity, retention, and efficiency in capillary electrochromatography

The influence of Joule heating on electroosmotic flow velocity, the retention factor of neutral analytes, and separation efficiency in capillary electrochromatography was investigated theoretically and experimentally. A plot of electrical current against the applied electrical field strength was used to evaluate the Joule heating effect. When the mobile phase concentration of Tris buffer exceeded 5.0 mM in the studied capillary electrochromatography systems using particulate and monolithic columns (with an accompanying power level of heat dissipation higher than 0.35 W/m), the Joule heating effect became clearly noticeable. Theoretical models for describing the variation of electroosmotic flow velocity with increasing applied field strength and the change of retention factors for neutral analytes with electrical field strength at higher Tris buffer concentrations were analyzed to explain consequences of Joule heating in capillary electrochromatography. Qualitative agreement between experimental data and implications of the theoretical model analysis was observed. The decrease of separation efficiency in capillary electrochromatography with macroporous octadecylsilica particles at high buffer concentration can be also attributed to Joule heating mainly via the increased axial diffusion of the analyte molecules and dispersion of solute bands by a nonuniform electroosmotic flow profile over the column cross-section. However, within a moderate temperature range, the contribution of the macroscopic velocity profile in the column arising from radial temperature gradients is insignificant.     

Synthesis of poly(<Emphasis Type="Italic">N</Emphasis>-methylolacrylamide)/polymethylacrylamide hybrids via frontal free-radical polymerization

In this study, poly(N-methylolacrylamide)/polymethylacrylamide (PNMA/PMAA) hybrids were produced successfully by frontal free-radical polymerization at ambient pressure. In a typical run, the appropriate amounts of reactants (N-methylolacrylamide, NMA; methylacrylamide, MAA) and initiator (ammonium persulfate) were dissolved in dimethyl sulfoxide at ambient temperature. Frontal polymerization (FP) was initiated by heating the wall of the tube with a soldering iron, and the resultant hot fronts were allowed to self-propagate throughout the reaction vessel. Once initiated, no further energy was required for polymerization to occur. The dependences of the front velocity and front temperature on the initiator concentration, reactant dilution, and NMA/MAA components were thoroughly investigated. The front temperatures were between 69 and 116 °C, depending on the persulfate concentration. We have also investigated the FP of PNMA/PMAA hybrids with N-methyl-2-pyrrolidone as solvent. Results show that FP can be exploited as a means for the preparation of PNMA/PMAA hybrids with the potential advantage of higher throughput compared to the traditional mode.     

Conformation of DNA modified by monofunctional Ru(II) arene complexes: recognition by DNA binding proteins and repair. Relationship to cytotoxicity

We analyzed DNA duplexes modified at central guanine residues by monofunctional Ru(II) arene complexes [(eta(6)-arene)Ru(II)(en)(Cl)](+) (arene = tetrahydroanthracene or p-cymene, Ru-THA or Ru-CYM, respectively). These two complexes were chosen as representatives of two different classes of Ru(II) arene compounds for which initial studies revealed different binding modes: one that may involve DNA intercalation (tricyclic-ring Ru-THA) and the other (mono-ring Ru-CYM) that may not. Ru-THA is approximately 20 times more toxic to cancer cells than Ru-CYM. The adducts of Ru-THA and Ru-CYM have contrasting effects on the conformation, thermodynamic stability, and polymerization of DNA in vitro. In addition, the adducts of Ru-CYM are removed from DNA more efficiently than those of Ru-THA. Interestingly, the mammalian nucleotide excision repair system has low efficiency for excision of ruthenium adducts compared to cisplatin intrastrand crosslinks.     

Cationic cyanine as a near-infrared fluorescent probe for the determination of nucleic acids

A new method with a cationic near-IR cyanine as fluorescent probe was developed for the determination of nucleic acids. The near-IR cyanine shows maximum excitation and emission wavelengths at 765 and 790 nm, respectively, in aqueous solution. The method is based on the fluorescence decrease of near-IR cyanine in the presence of nucleic acids. Under optimal conditions, the ratio of fluorescence intensity in the absence and presence of nucleic acids was proportional to the concentration of nucleic acids over the range 0.10-1.2 microg/mL for CT (calf thymus) DNA or SM (salmon sperm) DNA, and 0.10-1.6 microg/mL for yeast RNA. The detection limits were 30 ng/mL for CT DNA, 25 ng/mL for SM DNA and 70 ng/mL for yeast RNA. The relative standard deviation (n = 6) was 2.1% for 500 ng/mL CT DNA, 2.4% for 500 ng/mL SM DNA and 2.7% for 500 ng/mL yeast RNA, respectively.     

Cyanex301的纯化及其特性

研究了用Ｃｙａｎｅｘ３０１［ＴＭ］铵盐在苯中重结晶以纯化Ｃｙａｎｅｘ３０１的方法，该法收率６２．４％，产品纯度＞９９％。测定了经纯化后产品的红外光谱，研究了纯化产品在－水正庚烷体系中的分配平衡及其在正庚烷中的缔合，浓度在０．２～１．０ｍｏ１／Ｌ范围，Ｃｙａｎｅｘ３０１主要以二聚形式存在。     

硫代草酸二乙二胺铬(Ⅲ)配合物的光化学

制备了铬(Ⅲ)的一个新配合物cis-[Cr(en)_2SC_2O_3·Cl·H_2O,这里en表示乙二胺.在酸性水溶液中进行光照.释放H_2S,生成cis-Cr(en)_2(C_2O_4)~+,测定了光分解反应的准一级速度常数,配合物消失的量子产率取决于照射波长和溶液的酸度,还讨论了光反应机制.     

Separation of metal ions by capillary electrophoresis

A number of experimental parameters have been optimized for the separation of 26 metal ions, including alkali, alkaline earth, transition and lanthanide metal ions. Experimental parameters that were evaluated included nature of indirect-detection reagent, pH of electrolyte, concentration of complexing agent and nature of the surface of the capillary; unbonded and C₁ and C₁₈ bonded phases were studied. In addition the effect of internal diameter on linearity and signal-to-noise ratio was examined, and separation efficiency was determined for a variety of experimental conditions. Detection limits (signal-to-noise RATIO = 3) were ca. 1 μg/ml for the lanthanides, ca. 0.6 μg/ml for transition and alkaline earth ions and ca. 0.1–0.8 μg/ml for alkali metal ions. The average relative standard deviations of were 3.7, 5.1 and 2.5% on unbonded, C₁ and C₁₈ capillaries, respectively. Whereas conventional regression analysis suggested that the calibration curves were linear over the range of 1·10⁻⁵ to 4·10⁻⁴ mol/l, sensitivity plots showed that the results were actually linear to within 6% only over the range of 2.5·10⁻⁵ to 4·10⁻⁴ mol/l.     

CSE-MECC two-dimensional capillary electrophoresis analysis of proteins in the mouse tumor cell (AtT-20) homogenate

Two-dimensional capillary electrophoresis was used for the separation of proteins and biogenic amines from the mouse AtT-20 cell line. The first-dimension capillary contained a TRIS–CHES–SDS–dextran buffer to perform capillary sieving electrophoresis, which is based on molecular weight of proteins. The second-dimension capillary contained a TRIS–CHES–SDS buffer for micellar electrokinetic capillary chromatography. After a 61-s preliminary separation, fractions from the first-dimension capillary were successively transferred to the second-dimension capillary, where they further separated by MECC. The two-dimensional separation required 60 min.