反相高效液相色谱/电喷雾质谱法测定血浆中盐酸舍曲林

采用反相高效液相色谱-电喷雾质谱法(LC-ESI/MS)测定人体血浆中盐酸舍曲林。以盐酸丙咪嗪为内标,按内标法定量。血浆样品经pH 10.00碳酸钠溶液碱化,加入甲基叔丁基醚萃取,离心分离,取上清液吹干,用流动相溶解进样。色谱柱:RP-Extend-C18(150 mm×4.6 mm,5μm),柱温:40℃;流动相:pH 3.00的三氟乙酸溶液-甲醇(40∶60,V/V),流速0.6 mL/m in。质谱采用选择离子监控模式,检测离子的核质比(m/z)分别是281(丙咪嗪)和159(舍曲林)。舍曲林和丙咪嗪的保留时间分别是5.4 m in和3.8 m in;舍曲林标准曲线线性范围为1~80μg/L;检出限为1.0μg/L(S/N>10);日间、日内相对标准差均小于6.0%,相对回收率为90%~106%;提取回收率在75%~93%范围内。此法适合人体药代动力学的血浆样品的分析,结果准确、可靠。     

Phase behavior of poly(9,9-di-n-hexyl-2,7-fluorene)

Here we report the phase behavior of poly(9,9-di-n-hexyl-2,7-fluorene) (PFH), which previously received little attention as compared to its homologues poly(9,9-di-n-octyl-2,7-fluorene) (PFO) and poly(9,9-di-(2'-ethylhexyl)-2,7-fluorene) (PFEH). By means of differential scanning calorimetry, X-ray diffraction, and electron microscopy, we show that there exist four different phases in PFH. The as-cast film is mainly composed of a mesomorphic beta phase with layer spacing of ca. 1.4 nm. This beta phase is inherently metastable and, upon heating above 175 degrees C, transforms into a crystalline (alpha) form that melts into a nematic (N) liquid above 250 degrees C. Upon stepwise cooling, the nematic melt crystallizes into the alpha phase first, followed by solid-solid transformation into another crystalline (alpha') form. Unit cell structure of the alpha form is monoclinic whereas that of the alpha' form is triclinic, but departures from strict orthogonality are slight (by ca. 6 degrees). These observations not only support our previous assignment of two crystalline forms (both orthorhombic in structure) in PFO but also provide insights to the crystalline nature of the polyfluorene series.     

Direct observation of the intramolecular triplet-triplet energy transfer in poly(aryl ether) dendrimers

A series of benzophenone (BP) and naphthalene (NA) labeled poly(aryl ether) dendrimers (BP-Gn-NA), generations 1-4, were synthesized, and their photophysical properties were examined. Flash photolysis demonstrates that the triplet energy in BP-Gn-NA can be transferred from the peripheral BP chromophores to the core NA group with the efficiencies of ca. 0.97, 0.96, 0.88, and 0.54 and with the rate constants of 1.4x10(8), 1.2x10(8), 9.5x10(7), and 1.3x10(7) s-1 at room temperature for generations 1-4, respectively. The transient absorption spectra of BP-Gn-NA show clearly the formation of the triplet NA absorption along with the decay of the triplet BP one with an isosbestic point at 475 nm, which gives direct evidence of the triplet energy transfer from the periphery BP chromphores to the core NA group. The phosphorescence of the NA group attached to the focal point was observed when the periphery BP chromophores were selectively irradiated in BP-G1-NA at 77 K. The triplet energy transfer occurs at 77 K with the efficiencies of 1.0, 0.16, 0.17, and 0.21 for generations 1-4, respectively. The intramolecular triplet energy transfer is proposed to proceed mainly via a through space mechanism.     

Mass spectrometric analysis of enzymatic digestion of denatured collagen for identification of collagen type

Collagen type II and I from bovine were thermally denatured and digested with trypsin. The digest mixture was analyzed with liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS). Peptides in the digest mixture were identified by mass spectrometry/mass spectrometry (MS/MS) sequencing. The results indicated that the digest mixtures of collagen type II and I contained lots of specific peptides and common peptides. Specific peptides could be used as index for identifying collagen type. Articular cartilage from bovine was pretreated and analyzed with the same method to determine the collagen types. The result indicated that the method developed was effective for identification of collagen types. The research provided a possible approach for collagen identification in particular tissues.     

Preparation of insulin-loaded PLA/PLGA microcapsules by a novel membrane emulsification method and its release in vitro

Uniform-sized biodegradable PLA/PLGA microcapsules loading recombinant human insulin (rhI) were successfully prepared by combining a Shirasu Porous Glass (SPG) membrane emulsification technique and a double emulsion-evaporation method. An aqueous phase containing rhI was used as the inner water phase (w1), and PLA/PLGA and Arlacel 83 were dissolved in a mixture solvent of dichloromethane (DCM) and toluene, which was used as the oil phase (o). These two solutions were emulsified by a homogenizer to form a w1/o primary emulsion. The primary emulsion was permeated through the uniform pores of a SPG membrane into an outer water phase by the pressure of nitrogen gas to form the uniform w1/o/w2 droplets. The solid polymer microcapsules were obtained by simply evaporating solvent from droplets. Various factors of the preparation process influencing the drug encapsulation efficiency and the drug cumulative release were investigated systemically. The results indicated that the drug encapsulation efficiency and the cumulative release were affected by the PLA/PLGA ratio, NaCl concentration in outer water phase, the inner water phase volume, rhI-loading amount, pH-value in outer water phase and the size of microcapsules. By optimizing the preparation process, the drug encapsulation efficiency was high up to 91.82%. The unique advantage of preparing drug-loaded microcapsules by membrane emulsification technique is that the size of microcapsules can be controlled accurately, and thus the drug cumulative release profile can be adjusted just by changing the size of microcapsules. Moreover, much higher encapsulation efficiency can be obtained when compared with the conventional mechanical stirring method.     

Molecular receptors for monosaccharides: di(pyridyl)naphthyridine and di(quinolyl)naphthyridine

The recognition capabilities of two molecular receptors 2,7-di(3′-pyridyl)-1,8-naphthyridine (DPN) and 2,7-di(3′-quinolyl)-1,8-naphthyridine (DQN) toward monosaccharides in chloroform were evaluated. Both DPN and DQN possess a naphthyridine core moiety, in which two pyridinic nitrogen atoms serve as the proton acceptors. Attached to the C2 and C7 positions of naphthyridine are two identical arms, each of which consists of pyridine (DPN) or quinoline (DQN) moiety that also acts as the proton acceptor. The arrangement of hydroxyl groups in monosaccharides offers the proton donors complementary to the proton acceptors of DPN (or DQN) to form a quadruply hydrogen bonds complex. The binding processes were studied by UV-vis, fluorescence and ¹H NMR spectrophotometric titrations as well as electrospray ionization mass spectroscopy. The binding strength between DPN (or DQN) and examined monosaccharides was comparable to that for many other hydrogen-bonding host molecules previously reported.     

Synthesis and characterization of one- to three-dimensional compounds composed of paradodecatungstate-B cluster and transition metals as linkers

Three new extended frameworks built from paratungstate and transition metals have been synthesized and characterized. In the compound Na₈[{Cd (H₂O)₂}(H₂W₁₂O₄₂)]·32H₂O (1), two neighboring paratungstate-B ions [H₂W₁₂O₄₂]¹⁰⁻ are linked by [Cd(H₂O)₂]²⁺ units, leading to the formation of infinite one-dimensional (1D) anion chain [{Cd(H₂O)₂}(H₂W₁₂O₄₂)]_n⁸ⁿ⁻. The anion [{Co(H₂O)₃}{Co(H₂O)₄}(H₂W₁₂O₄₂)]_n⁶ⁿ⁻ of the compound Na₆[{Co(H₂O)₃}{Co(H₂O)₄}(H₂W₁₂O₄₂)]·29H₂O (2) shows a layer-like (2D) structure in which paratungstate-B units are linked by CoO₆ octahedra, while the anion [{Co(H₂O)₃}₃(H₂W₁₂O₄₂)]_n⁴ⁿ⁻ of the compound (H₃O⁺)₃[{Na(H₂O)₄}{Co(H₂O)₄}₃(H₂W₁₂O₄₂)]·24.5H₂O (3) is a three-dimensional (3D) anionic polymer that consists of paratungstate-B units linked by CoO₆ octahedra. Compound 3 can reversibly adsorb and desorb water molecules leading to the color reversibly change from pink to violet. The preliminary magnetic measurement and electrochemical properties of compounds are performed. The crystal structure of unexpected product Na₄[NiW₆O₂₄H₆]·13H₂O (4) is described here for the rare report of crystal structure information on the Anderson-type polyoxotungstate which has nickel as a heteroatom.     

Kinetic parameters from thermogravimetric study of used rubber granulates–polyurethane composites

From the TG data of rubber granulates, different polyurethane and composites it can be seen that the thermal decomposition for the rubber granulate and all of the composites start above 520 K. Two major mass losses for the rubber granulates and majority of the composites were observed and thermal decomposition is essentially complete by ~820 K. The changes of activation energies of lower and higher temperature decomposition, calculated according to the different equations were observed for a priori assumed first-order reaction for devolatilisation. Differences between determined and calculated results could suggest a possible reaction between polyurethane agents and rubber granulate during the composites formations.     

Direct determination of rare earth impurities in high purity erbium oxide dissolved in nitric acid by inductively coupled plasma mass spectrometry

A novel method was developed for the direct determination of trace quantities of rare earth elements (REEs) in high purity erbium oxide dissolved in nitric acid by inductively coupled plasma mass spectrometry (ICP-MS) in this work. The mass spectra overlap interferences arose from Er matrix on the neighbouring and monoisotopic analytes of ¹⁶⁵Ho(100) and ¹⁶⁹Tm(100) were eliminated by adjusting instrumental peak resolution value from 0.7 to 0.3 amu. The matrix suppression effect of Er on the ion peak signals of REEs impurities was effectively compensated with spiking In as internal standard element. The limit of quantitation (LOQ) of REEs impurities was from 0.0090 to 0.025 μg g⁻¹, the recoveries of spiked sample for REEs were found to be in the range of 90.3-107% through using the proposed method and relative standard deviation (R.S.D.) varied between 2.5% and 6.7%. The novel methodology had been found to be suitable for the direct determination of trace REEs impurities in 99.999-99.9999% high purity Er₂O₃ and the results obtained from this method keep in good agreement with that acquired from high resolution ICP-MS.