Gas-phase spectroscopy of the unstable sulfur diisocyanate molecule S(NCO)2.

Sulfur diisocyanate is generated from a heterogeneous reaction of gaseous sulfur dichloride with silver cyanate and studied for the first time in the gas phase. Combined with quantum chemical calculations, the electronic structure is characterized by photoelectron spectroscopy (PES). Simultaneously, an investigation of the possible ionization and dissociation processes for the molecular cation is presented based on experimental soft ionization mass spectrometry. From the calculated bond-dissociation energies, the dissociation pathway is determined. S(NCO)2+ undergoes 1,3-sigmatropic rearrangement with a smaller barrier height (9.9 kcal mol(-1)) than the neutral counterpart. Thus, the 1,3-sigmatropic rearrangement is preferred for the molecular cation, and OCNCO+ and NS+ is produced by subsequent dissociation of the rearrangement product. The analysis agrees very well with the experimental mass spectrum.     

Assembly of well-aligned multiwalled carbon nanotubes in confined polyacrylonitrile environments: electrospun composite nanofiber sheets

Highly oriented, large area continuous composite nanofiber sheets made from surface-oxidized multiwalled carbon nanotubes (MWNTs) and polyacrylonitrile (PAN) were successfully developed using electrospinning. The preferred orientation of surface-oxidized MWNTs along the fiber axis was determined with transmission electron microscopy and electron diffraction. The surface morphology and height profile of the composite nanofibers were also investigated using an atomic force microscope in tapping mode. For the first time, it was observed that the orientation of the carbon nanotubes within the nanofibers was much higher than that of the PAN polymer crystal matrix as detected by two-dimensional wide-angle X-ray diffraction experiments. This suggests that not only surface tension and jet elongation but also the slow relaxation of the carbon nanotubes in the nanofibers are determining factors in the orientation of carbon nanotubes. The extensive fine absorption structure detected via UV/vis spectroscopy indicated that charge-transfer complexes formed between the surface-oxidized nanotubes and negatively charged (-CN[triple bond]N:) functional groups in PAN during electrospinning, leading to a strong interfacial bonding between the nanotubes and surrounding polymer chains. As a result of the highly anisotropic orientation and the formation of complexes, the composite nanofiber sheets possessed enhanced electrical conductivity, mechanical properties, thermal deformation temperature, thermal stability, and dimensional stability. The electrical conductivity of the PAN/MWNT composite nanofibers containing 20 wt % nanotubes was enhanced to approximately 1 S/cm. The tensile modulus values of the compressed composite nanofiber sheets were improved significantly to 10.9 and 14.5 GPa along the fiber winding direction at the MWNT loading of 10 and 20 wt %, respectively. The thermal deformation temperature increased with increased MWNT loading. The thermal expansion coefficient of the composite nanofiber sheets was also reduced by more than an order of magnitude to 13 x 10(-6)/ degrees C along the axis of aligned nanofibers containing 20 wt % MWNTs.     

Influence of organic bases on constructing 3D photoluminescent open metal-organic polymeric frameworks

Four three-dimensional non-interpenetrating open coordination frameworks constructed from the CTC ligand (CTC =cis,cis-1,3,5-cyclohexanetricarboxylate) coordinated to metal ions (Mn(II) and Cd(II)): Mn(3)(CTC)(2)(DMF)(2)(1); Cd(3)(CTC)(2)(H(2)O)(3).H(2)O (2); Cd(3)(CTC)(2)(4,4'-bpy)(2)(EG)(2)(3); Cd(3)(CTC)(2)(mu(2)-hmt)(DMF)(C(2)H(5)OH)(H(2)O).2H(2)O (4)(DMF = dimethylformamide and EG = ethylene glycol) have been synthesized by slow evaporation of DMF-C(2)H(5)OH-H(2)O solutions of M(II)(Mn(II) or Cd(II)) and CTC in the presence of the organic bases TEA (triethylamine), TEA, 4,4'-bpy (4,4'-bipyridine) and hmt (hexamethylenetetramine), respectively, and structurally characterized by X-ray crystallography. The polymer constructed by CTC and Mn(II) exhibits a 3-D architecture with 5 x 9 A channels; the polymer formed by CTC and Cd(II) exists a 3-D extended framework with 9 x 9 A channels; wave-like sheet subunits of the polymer are upheld by 4,4'-bpy ligands resulting in a 3-D framework with 4 x 10 A channels; two-fold alternate sheet subunits of the polymer are interlinked by mu(2)-hmt ligands to form a novel 3-D architecture with 7 x 8 A channels. Polymers exhibit their strongest excitation peaks at 391, 390 and 394 nm, respectively, and their main strong emission peaks are at 543, 460 (with a shoulder peak at about 570 nm) and 557 nm, respectively.     

Hydrothermal Synthesis and Optical Properties of ZnO Nanostructured Films Directly Grown from/on Zinc Substrates

Uniform ZnO nanorods arrays are grown directly from and on Zn foils in pure water under hydrothermal conditions at a relatively low temperature. The nanorods are 80–200 nm in diameter and ∼ 1 μm in length, which grow on the Zn foil along the [001] direction. By changing the pure water to a urea solution, a Zn compound ([Zn₅(OH)₆(CO₃)₂], a precursor of ZnO nanoflowers film, is created by self-assembly. The ZnO nanoflowers film can be easily obtained by heating the [Zn₅(OH)₆(CO₃)₂] compound in N₂ at 350∘C for 5–6 hours. Possible growth processes of the ZnO nanorods arrays and the [Zn₅(OH)₆(CO₃)₂] nanoflowers are discussed. Photoluminescence properties of the as-prepared ZnO nanostructures have been measured. The ZnO nanorods array synthesized using our method has minimal defects so that only band-gap emission is observed. However, the ZnO nanoflowers film, obtained by heating the [Zn₅(OH)₆(CO₃)₂] nanoflower precursor in N₂, is polycrystalline and displays strong defect-related emission.     

Gaseous nitryl azide N4O2: A joint theoretical and experimental study

Gaseous nitryl azide N₄O₂ is generated by the heterogeneous reaction of gaseous ClNO₂ with freshly prepared AgN₃ at −50 °C. The geometric and electronic structure of the molecule in the gas phase has been characterized by in situ photoelectron spectroscopy (PES) and quantum chemical calculations. The experimental first vertical ionization energy of N₄O₂ is 11.39 eV, corresponding to the ionization of an electron on the highest occupied molecular orbital (HOMO) {4a″(π_{nb(N4–N5–N6)})}⁻¹. An apparent vibrational spacing of 1600 ± 60 cm⁻¹ (ν_asO1N2O3) on the second band at 12.52 eV (π_{nb(O1–N2–O3)}) further confirms the preference of energetically stable chain structure in the gas phase. To complement the experimental results, the potential-energy surface of this structurally novel transient molecule is discussed. Both calculations and spectroscopic results suggest that the molecule adopts a trans-planar chain structure, and a five-membered ring decomposition pathway is more favorable.     

Using three major criteria to evaluate aromaticity of five-member C-containing rings and their Si-, N-, and P-substituted aromatic heterocyclics

In this paper, we used bond-length equalization, aromatic stabilization energies (ASE) and nucleus-independent chemical shifts (NICS), calculated with (density functional theory) B3LYP levels at the 6-311+G^** basis set, to evaluate the aromaticity of a set of 38 five-member planar π-electron aromatic systems: sila-, aza- and phospha- derivatives and their parent systems. The result revealed statistically significant correlations among the above three criteria, and the order of aromaticity of the whole set was: Aza- derivatives rings > Phospha- derivatives rings > Sila- derivatives rings > Carbon-containing rings; NICS(0.6) and NICS(0.8) had the same results in evaluating the order of aromaticity in our case.     

三唑类硫醚及二硫醚化合物的合成

以2-苯基-1，2，3-三唑-4-甲酰肼为原料，合成了6个新的含连三唑和均三唑的硫醚类化合物，并经IR、^1HNMR、MS和元素分析进行了结构表征。     

用EXAFS研究NiO在γ-Al2O3表面上的分散

本文使用EXAFS方法研究NiO在γ-Al_2O_3的表面上的分散情况。文章讨论了Ni含量为7%、13%、18%、26%、35%的NiO/γ-Al_2O_3体系的径向结构函数图以及Ni含量为13%、26%的NiO/α-Al_2O_3样品的径向结构函数图,认为NiO能在γ-Al_2O_3表面上成单层分散。分散后的Ni-O距离接近NiO晶体的Ni-O距离,表明Ni离子和γ-Al_2O_3表面上的氧有很强的相互作用。     

活性位高度暴露的钴/氮/碳电催化剂的构建及氧还原性能研究

金属/氮/碳催化剂（M/N/C，M=Fe、Co等）是最有发展前景的非贵金属电催化剂之一，其性能依赖于催化剂表面的活性物种密度.通过常规的热解含氮前驱物与金属盐的方法制得的催化剂往往存在金属活性物种被包埋而不能有效利用的缺点.考虑到石墨相氮化碳（g-C₃N₄）富含类吡啶氮和亚纳米孔腔结构，将g-C₃N₄包覆在高导电性碳纳米笼（hCNC）表面，进而利用表层g-C₃N₄的配位和限域作用锚定大量Co²⁺离子，获得的Co/g-C₃N₄/hCNC复合物经热解后形成了活性位高度暴露、导电性好、孔结构丰富的Co/N/C催化剂.800℃热解得到的最优化催化剂在碱性介质中展现出优异氧还原活性，其起始电位（0.97 V）与商业Pt/C催化剂相当，且抗甲醇干扰性能和稳定性优异.此项研究提供了一种构建具有高度暴露活性位的M/N/C催化剂的有效策略.