聚甲基丙烯酸甲酯/聚醋酸乙烯酯共混相分离过程的标度行为与逾渗结构

本文用激光光散射和光学显微镜方法研究了聚甲基丙烯酸甲酯/聚醋酸乙烯酯共混体系不稳相分离过程最大散射强度I_m(t,T)和相应波矢q_m(t,T)随时间变化规律及相区的逾渗结构.实验结果表明:I_m(T,t)和q_m(t,T)与时间t满足简单的标度关系I_m(t,T)～t~β,q_m(t,T)～t~(-α),且标度关系β=3α成立.揭示了相态结构的分维特征.给出了计算相态结构分维数的简便方法,其分维数D值约为1.64±0.03.与逾渗模型给出的D值接近.     

Ōtsukische Räume mit Einem Zweifach Rekurrenten Metrischen Grundtensor

In this note necessary and sufficient conditions are determined for Weyl—tsukispaces to have a birecurrent metric, i.e., _{m k} g _ij = _km g _ij . It is proved that in this space the metric tensor is an eigen-tensor. The special caseP _j ⁱ = (x) _j ⁱ is examined and we prove that in this case the recurrent metric tensor is likewise birecurrent.

     

聚甲基丙烯酸甲酯/聚醋酸乙烯酯共混分相过程结构函数的标度分析和相凝聚

高分子共混体系相分离动力学研究已取得了很大的进展。Cahn理论可很好地描述相分离初期过程,de Gennes的蛇行理论可较好地描述相分离初期大分子扩散。在相分离后期,人们已经发现动力学参量的标度行为,但实验结果不一,标度成因尚不十分清楚。本文研究了聚甲基丙烯酸甲酯(PMMA)/聚醋酸乙烯酯(PVAc)共混体系相分离后期过程。分析了结构函数的标度行为,初步讨论了相凝聚特征。     

Electronic structure and molecular orbital study of the first excited state of the high‐efficiency blue OLED material bis(2‐methyl‐8‐quinolinolato)aluminum(III) hydroxide complex from ab initio and TD‐B3LYP

Bis(2‐methyl‐8‐quinolinolato)aluminum(III) hydroxide complex (AlMq₂OH) is used in organic light‐emitting diodes (OLEDs) as an electron transport material and emitting layer. By means of ab initio Hartree–Fock (HF) and density functional theory (DFT) B3LYP methods, the structure of AlMq₂OH was optimized. The frontier molecular orbital characteristics and energy levels of AlMq₂OH have been analyzed systematically to study the electronic transition mechanism in AlMq₂OH. For comparison and calibration, bis(8‐quinolinolato)aluminum(III) hydroxide complex (Alq₂OH) has also been examined with these methods using the same basis sets. The lowest singlet excited state (S₁) of AlMq₂OH has been studied by the singles configuration interaction (CIS) method and time‐dependent DFT (TD‐DFT) using a hybrid functional, B3‐LYP, and the 6‐31G* basis set. The lowest singlet electronic transition (S₀ → S₁) of AlMq₂OH is π → π* electronic transitions and primarily localized on the different quinolate ligands. The emission of AlMq₂OH is due to the electron transitions from a phenoxide donor to a pyridyl acceptor from another quinolate ligand including C → C and O → N transference. Two possible electron transfer pathways are presented, one by carbon, oxygen, and nitrogen atoms and the other via metal cation Al³⁺. The comparison between the CIS‐optimized excited‐state structure with the HF ground‐state structure indicates that the geometric shift is mainly confined to the one quinolate and these changes can be easily understood in terms of the nodal patterns of the highest occupied and lowest unoccupied molecular orbitals. On the basis of the CIS‐optimized structure of the excited state, TD‐B3‐LYP calculations predict an emission wavelength of 499.78 nm. An absorption wavelength at 380.79 nm on the optimized structure of B3LYP/6‐31G* was predicted. They are comparable to AlMq2OH 485 and 390 nm observed experimentally for photoluminescence and UV‐vis absorption spectra of AlMq₂OH solid thin film on quartz, respectively. Lending theoretical corroboration to recent experimental observations and supposition, the reasons for the blue‐shift of AlMq2OH were revealed. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

On‐Line Determination of Arsenic Species in Sea Water by Selective Hydride Generation Coupled with Inductively Coupled Plasma — Mass Spectrometry

A method for direct de termination of total in organic arsenic (III+V), arsenic (III) and dimethylarsinate (DMA) in sea water was developed by combining continuous‐flow selective hydride generation and inductively coupled plasma mass spectrometry (ICP‐MS) is presented. The principle underlying selective hydride generation is based on proper control of the reaction conditions for achieving separation of the respective arsenic species. The effects of pH and composition of reaction media on mutual interference between the arsenic species were investigated in detail. The results indicate that the appropriate media for the selective determination of total in organic arsenic, DMA and As(III) are 6 M HNO₃, acetate buffer at pH = 4.63 and citrate buffer at pH = 6.54, respectively. The concentrations of total inorganic arsenic species, As(III+V), and As(III) were respectively deter mined and that of As(V) was obtained by the difference between them. As to the concentration of DMA, it was obtained after correction from the interference caused by As(III) and As(V). By following the established procedure, the detection lim its (as based on 3‐sigma criterion) for As(III+V), As(III) and DMA were 0.050, 0.009, and 0.002 ng/mL, respectively. There liability of the pro posed method was evaluated in terms of precision and spike addition. The results indicated that the precision of better than 3% and spike recovery of 95 to 105% for all the arsenic species tested in the natural sea water samples can be obtained.     

Microbiosensor for acetylcholine and choline based on electropolymerization/sol–gel derived composite membrane

Amperometric enzyme biosensors for the determination of acetylcholine (ACh) and choline (Ch) have been described. For the fabrication of the biosensors, N-acetylaniline (nAN) was first electropolymerized on a Pt electrode surface to be served as a permselective layer to reject interferences. Bovine serum albumin (BSA) and choline oxidase (CHOD) were co-immobilized in a zinc oxide (ZnO) sol–gel membrane on the above modified Pt electrode for a Ch sensor, or CHOD, acetylcholinesterase (AChE) and BSA immobilized together for an ACh/Ch sensor. The poly (N-acetylaniline) (pnAN) film was the first time used for an ACh/Ch sensor and found to have excellent anti-interference ability, and the BSA in the sol–gel can improve the stability and activity of the enzymes. Amperometric detection of ACh and Ch were realized at an applied potential of +0.6 V versus SCE. The resulting sensors were characterized by fast response, expanded linear range and low interference from endogenous electroactive species. Temperature and pH dependence and stability of the sensor were investigated. The optimal ACh/Ch sensor gave a linear response range of 1.0 × 10⁻⁶ to 1.5 × 10⁻³ M to ACh with a detection limit (S/N = 3) of 6.0 × 10⁻⁷ M and a linear response range up to 1.6 × 10⁻³ M to Ch with a detection limit of 5.0 × 10⁻⁷ M. The biosensor demonstrated a 95% response within less than 10 s.     

在LiCl-KCl-NaCl熔盐体系中碳的阴极还原的研究

用循环伏安法和电位阶跃法研究了LiCl-KCl-NaCl熔盐体系中碳的阴极还原机理。在钨、铂、不锈钢等微电极上得到的伏安图表明碳的还原是由CO_3~(2-)离子经一步电化学反应实现的,电极反应速度控制步骤为CO_3~(2-)离子向阴极的扩散过程,还原过程具有反应物吸附特征。碳在W、Pt、不锈钢电极上析出电位分别为-2.05V、-1.745V和-1.90V(均相对于Ag/AgCl参比电极)。     

对位叠式循环方波伏安法：Ⅱ.平行催化体系

本文提出平行催化体系的对位叠式循环方波伏安法，并对共作了系统的研究，推导了这一方法的催化电流理论方程，并用验验证这理论的正确性，得到其各脉冲电流皆为同方向，对位叠式循环催化电流相当于将电流叠加４次，而波形不受方波幅度大小的影响，因而灵敏度和分辨率有较大提高，优于其它方波伏安法。     

亚硝酸甲酯分子在440nm附近的激光光解

近年来亚硝酸甲酯分子（CHa0NO）的光解动力学研究十分活跃｛‘5］，主要集中在紫外激光的单光子解离的机理，光解过程的矢量相关性质和光解产物的态分布．CH30NO分子的解离能D。（CH30－NO）＝174kJ·mol‘，若单从能量上看，人＜689。的光就能使其解离，但人＞400urn的光解离研究还未见报导．＊H30＊0分子在人＞40onm的强激光场下是充电离还是先解离，是单光子解离还是多光子解离，以及通过哪个电子态解离都不清楚．时间飞行质谱不仅具有质量分辨率高、范围宽，而且响应快，因此适合做光解光电离过程初生态产物的探测．特别是时间飞…     

A step-economic and one-pot access to chiral Cα-tetrasubstituted α-amino acid derivatives via a bicyclic imidazole-catalyzed direct enantioselective C-acylation

C^α-Tetrasubstituted α-amino acids are ubiquitous and unique structural units in bioactive natural products and pharmaceutical compounds. The asymmetric synthesis of these molecules has attracted a lot of attention, but a more efficient method is still greatly desired. Here we describe the first sequential four-step acylation reaction for the efficient synthesis of chiral C^α-tetrasubstituted α-amino acid derivatives from simple N-acylated amino acids via an auto-tandem catalysis using a single nucleophilic catalyst. The synthetic efficiency is improved via a direct enantioselective C-acylation; the methodology affords the corresponding C^α-tetrasubstituted α-amino acid derivatives with excellent enantioselectivities (up to 99% ee). This step-economic, one-pot, and auto-tandem strategy provides facile access to important chiral building blocks, such as peptides, serines, and oxazolines, which are often used in medicinal and synthetic chemistry.

The first four-step sequential reaction for the synthesis of C^α-tetrasubstituted chiral α-amino acid derivatives via auto-tandem catalysis has been developed.