Study on scattering correction in fast neutron tomography at NECTAR facility

Fast neutron tomography has been established as an inspection and detection tool at the NECTAR facility at the FRM-II reactor.Scattered neutrons from the object become a major disturbance and bring in artifacts and deviations in reconstruction results,especially for hydrogenous material object.In this article,an iterative scattering correction method for fast neutron tomography was proposed.In each loop of iteration the scattering component of the projections will be simulated by Monte-Carlo program MCNPX based on the previous reconstruction result and then it will be subtracted from original projections.The differences between scattering components at different perspectives were quantitatively evaluated and an average scattering component image was used for all projections finally.Smooth and uniform slices with more clear edges were obtained and the new reconstructed attenuation coefficients are quite close to the real one compared to the results without scattering correction,in which case the relative error of the reconstructed attenuation coefficients is about 10%–30%.     

Hollow glass microspheres coated with CoFe2O4 and its microwave absorption property

Spinel CoFe₂O₄ coating on the surface of hollow glass microspheres of low density was synthesized by co-precipitation method. The phase structures, morphologies, particle size, shell thickness, chemical compositions of the composites have been characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and energy dispersive X-ray spectroscopy (EDS). The results show that CoFe₂O₄ coating on hollow glass microspheres can be achieved, and the coating layers are constituted by CoFe₂O₄ nanoparticles of mean size ca. 10 nm. The as-synthesized powder materials were uniformly dispersed into the phenolic cement, then the mixture was pasted on metal plate with the area of 200 mm×200 mm as the test plate. The test of microwave absorption was carried out by the radar-absorbing materials (RAM) reflectivity far field radar cross-section (RCS) method. The results indicate that the coated CoFe₂O₄/hollow glass microspheres composites can be applied in lightweight and strong absorption microwave absorbers.     

交流源作用下介观RLC电路系统量子态随时间的演化

根据量子不变量理论，同时考虑介观电容器极板间电子波函数的耦合作用和电路的耗散,研究介观RLC电路系统在交流电流源作用下动力学的演化过程，并且得到描述系统量子态随时间的演化算符.进一步的分析结果表明，介观RLC电路系统的波函数将由任意的初态演化到一般的压缩态. 关键词： 介观RLC电路 交变电源 不变量理论 时间演化算符     

Substrate effect on the melting temperature of thin polyethylene films

Strong dependence of the crystal orientation, morphology, and melting temperature (Tm) on the substrate is observed in the semicrystalline polyethylene thin films. The Tm decreases with the film thickness decrease when the film is thinner than a certain critical thickness, and the magnitude of the depression increases with increasing surface interaction. We attribute the large Tm depression to the decrease in the overall free energy on melting, which is caused by the substrate attraction force to the chains that competes against the interchain force which drives the chains to crystallization.     

Highly stable amorphous indium‐zinc‐oxide thin‐film transistors with back‐channel wet‐etch process

The stabilities of amorphous indium‐zinc‐oxide (IZO) thin film transistors (TFTs) with back‐channel‐etch (BCE) structure are investigated. A molybdenum (Mo) source/drain electrode was deposited on an IZO layer and patterned by hydrogen peroxide (H₂O₂)‐based etchants. Then, after etching the Mo layer, SF₆ plasma with direct plasma mode was employed and optimized to improve the bias stress stability. Scanning electron microscopy and X‐ray photoelectron spectroscopic analysis revealed that the etching residues were removed efficiently by the plasma treatment. The modified BCE‐ TFTs showed only threshold voltage shifts of 0.25 V and –0.20 V under positive/negative bias thermal stress (P/NBTS, V_GS = ±30 V, V_DS = 0 V and T = 60 °C) after 12 hours, respectively. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

中、远红外双波段激光器发射光谱测量与评估

在分析中远红外双波段(氟化氘与一氧化碳)激光器发射光谱的基本特征和分光型谱仪存在高级次光谱混叠等问题的基础上,选定Tensor37干涉型遥测光谱仪并利用黑体标定出仪器响应函数;对中、远红外双波段激光器光谱进行了模拟测量和实际测量,分析评估了双波段激光器的谱线成分、峰值变化、测量精度和相对强度等,为双波段激光器的介质参数计算、运转参数优化以及红外应用提供有效数据。     

Subpeaks in the Brillouin loss spectra of distributed fiber-optic sensors

Subpeaks in the Brillouin loss spectra of distributed fiber-optic sensors were observed for what is believed to be the first time and studied. We discovered that the Fourier spectrum of the pulsed signal and the off-resonance oscillation both contributed to subpeaks. The off-resonance oscillation at frequency /v - vB/ is the oscillation in the Brillouin time domain when beat frequency v of the two counterpropagating laser beams does not match local Brillouin frequency vB. This study is important in differentiating the subpeaks from actual strain-temperature peaks.     

耦合系统的朗之万动力学产生法

提出一种朗之万动力学方法获取处于热平衡态耦合系统内部振子坐标,数值模拟了单端固定简谐振子链的时间演化行为,并将其平衡性质与解析解进行了比较.结果表明了朗之万动力学方法的有效性.推广应用于非简谐四次方型耦合系统,模拟得到振子的四次方均坐标,与理论值验证;以模拟结果作为样本点计算哈密顿量,其能量分布与Boltzmann分布相符.     

Local trimer orbital ordering in LiNiO2 studied by quantitative convergent beam electron diffraction technique

A local trimer orbital ordering model of LiNiO₂ was studied by means of theoretical calculation and experimental measurement of electron structure factors. Based on the trimer model, the electron structure factors were calculated by using the scattering factor of non-spherical Ni³⁺ ion. From these results, it is found that the effect of local orbital ordering on the electron structure factors of several subtle reflections, such as (202) and (107), is very large. The electron structure factors of these subtle reflections were measured by quantitative convergent beam electron diffraction method. The experimentally measured electron structure factor values of these reflections indicate that the trimer orbital ordering model is more close to the true structure of LiNiO₂.