A new method for determination of uric acid by the lactic acid-acetone-BrO(3)(-)-Mn(2+)-H(2)SO(4) oscillating reaction using the analyte pulse perturbation technique

A new analytical method for the determination of uric acid (UA) by the perturbation of UA on the Belousov-Zhabotinsky oscillating reaction is proposed. The method is based on the linear relationship between the changes in the oscillating period and the concentration of UA. The calibration curve is linear over the range of 2.0 × 10⁻⁵ to 5.0 × 10⁻⁴ M, with a detecting limit of 3.28 × 10⁻⁶ M. The method features good precision (R.S.D.: 3.59%) and excellent throughput (10 samples h⁻¹). The possible mechanism of the perturbation of UA on the oscillating reaction is discussed.     

含氰基侧基聚芳醚砜的合成与表征

汉２，６－二卤苯甲腈、４，４′－二氯二苯砜、４，４′－二羟基二苯砜、间苯二酚、对苯二酚、酚酞及双酚Ａ为主要原料，合成了含不同结构单元和不同氰基含量的含氰基侧基的聚芳醚砜，并采用ＩＲ、＾１３ＣＮＭＲ等分析手段对其结构进行了表征，同时研究了结构单元和氰基含量对聚芳醚砜性能的影响。     

冠醚B15C5萃取分离锂同位素的阴离子效应

本文研究了B15C5冠醚萃取锂盐时,不同阴离子对体系的同位素分离效应的影响。结果表明,阴离子在冠醚萃取过程中不仅对萃取络合物的稳定性有显著影响,而且阴离子半径及软度越大时,萃取体系的锂同位素分离系数(α_(LI))也越大。     

Synthesis,characterization, and theoretical studies of group 4 amido hydrotris(pyrazolyl)borate complexes

Titanium and zirconium amido complexes containing a hydrotris(pyrazolyl)borate (Tp) or hydrotris(3,5-dimethylpyrazolyl)borate (Tp*) ligand TpM(NMe(2))(3) (M = Ti, 1; M = Zr, 2) and Tp*M(NMe(2))(3) (M = Ti, 3; M = Zr, 4) were prepared by the reactions of M(NMe(2))(3)Cl (M = Ti, Zr) with sodium hydridotris(pyrazol-1-yl)borate and potassium hydridotris(3,5-dimethylpyrazol-1-yl)borate, respectively. The structures of 1, 2, and 4.CH(2)Cl(2) were determined by X-ray diffraction and show octahedral coordination geometry around the metal centers. Density functional theory calculations at the B3PW91 level were performed to understand the orientations and the rotational behavior of amido ligands in these metal complexes.     

Synthesis of Fullerene-end Functionalized Poly（methyl methacrylate） via Reverse Atom Transfer Radical Polymerization

The use of the reverse atom transfer radical polymerization （RATRP） to end-functionalize poly（methyl methacrylate） （PMMA） with fullerenes, e.g. C60 and C70 was described in this paper. The Cl-terrninated PMMA was prepared via RATRP with designed molecular weight and narrow molecular weight distributions, and then directly used to react with fullerenes to produce C60（C70） terminated PMMA polymers in the presence of CuBr/Cu/bipy or FeCl2/bipy catalysts. The resultant polymers exhibit good solubility in some common organic solvents, e.g. THF, CHCl3 and toluene, and were well structurally characterized by a variety of physical techniques.     

Palladium-catalyzed regioselective arylation of imidazo[1,2-a]pyrimidine

Imidazo[1,2-a]pyrimidine can be arylated at the 3-position with aryl bromides in the presence of base and a catalytic amount of palladium. This provides an efficient one-step synthesis of 3-arylimidazo[1,2-a]pyrimidines from the unsubstituted heterocycle. [reaction: see text]     

Preparation of spherical spinel LiMn2O4 cathode material for lithium ion batteries

A novel process is proposed for synthesis of spinel LiMn₂O₄ with spherical particles from the inexpensive materials MnSO₄, NH₄HCO₃, and NH₃H₂O. The successful preparation started with carefully controlled crystallization of MnCO₃, leading to particles of spherical shape and high tap density. Thermal decomposition of MnCO₃ was investigated by both DTA and TG analysis and XRD analysis of products. A precursor of product, spherical Mn₂O₃, was then obtained by heating MnCO₃. A mixture of Mn₂O₃ and Li₂CO₃ was then sintered to produce LiMn₂O₄ with retention of spherical particle shape. It was found that if lithium was in stoichiometric excess of 5% in the calcination of spinel LiMn₂O₄, the product had the largest initial specific capacity. In this way spherical particles of spinel LiMn₂O₄ were of excellent fluidity and dispersivity, and had a tap density as high as 1.9 g cm^–3 and an initial discharge capacity reaching 125 mAh g^–1. When surface-doped with cobalt in a 0.01 Co/Mn mole ratio, although the initial discharge capacity decreased to 118 mAh g^–1, the 100th cycle capacity retention reached 92.4% at 25°C. Even at 55°C the initial discharge capacity reached 113 mAh g^–1 and the 50th cycle capacity retention was in excess of 83.8%.     

Determination of adefovir in human plasma by liquid chromatography/tandem mass spectrometry: application to a pharmacokinetic study

A liquid chromatography/tandem mass spectrometry (LC/MS/MS) method was developed and validated to determine the concentrations of adefovir [9-(2-phosphonylmethoxyethyl)adenine, PMEA] in human plasma. After one-step protein precipitation of plasma samples by methanol, adefovir was analyzed by LC/MS/MS using positive electrospray ionization. Chromatography was performed on a C18 column. The extraction recoveries of adefovir were found to be 85.1-89.3%. Adefovir was stable under routine laboratory conditions. A minimal matrix effect resulting in a slight ionization enhancement of adefovir (<10.9%) was observed, which did not markedly affect the behavior of the calibrations curves and accuracy and precision data. The method had a chromatographic run time of 7.8 min and a linear calibration curve over the concentration range 1.5-90 ng/mL for adefovir. The lower limit of quantification of the method was 1.5 ng/mL. The intra- and inter-day precision was less than 8.4%. These results indicated that this LC/MS/MS method has high selectivity and efficiency, and acceptable accuracy, precision and sensitivity. The validated LC/MS/MS method has been successfully used in a pharmacokinetic study in healthy volunteers treated with oral adefovir dipivoxil at 10 and 20 mg.     

Preparation of Mn3O4 nanocrystallites by low-temperature solvothermal treatment of γ-MnOOH nanowires

The preparation of trimanganese tetroxide (Mn₃O₄) nanocrystallites from γ-MnOOH nanowires under mild conditions has been achieved by two steps: first, γ-MnOOH nanowires with a mean diameter of about 12 nm and lengths of up to several micrometers were directly prepared via hydrothermal reaction between KMnO₄ and toluene in water at 180°C for 24 h; then, pure Mn₃O₄ nanocrystallites could be obtained by solvothermal treatment of the γ-MnOOH nanowires in ethylenediamine (EDA) and ethylene glycol (EG) at 150°C for 24 h. It was found that the Mn₃O₄ product obtained in EDA comprised well-defined nanocrystallites with the size in the range of 15-35 nm, while the one obtained in EG consisted of aggregated nanoparticles with the size of less than 18 nm.The possible formation mechanism of nanocrystalline Mn₃O₄ in EDA and EG and reasons for the different effects of various solvents on the products were also proposed.