Preparation and magnetic properties of barium ferrites substituted with manganese, cobalt, and tin

Barium ferrites substituted by Mn-Sn, Co-Sn, and Mn-Co-Sn with general formulae BaFe_12−2xMn_xSn_xO₁₉ (x=0.2-1.0), BaFe_12−2xCo_xSn_xO₁₉ (x=0.2-0.8), and BaFe_12−2xCo_x/2Mn_x/2Sn_xO₁₉ (x=0.1-0.6), respectively, have been prepared by a previously reported co-precipitation method. The efficiency of the method was refined by lowering the reaction temperature and shortening the required reaction time, due to which crystallinity improved and the value of saturated magnetization increased as well. Low coercivity temperature coefficients, which are adjustable by doping, were achieved by Mn-Sn and Mn-Co-Sn doping. Synthesis efficiency and the effect of doping are discussed taking into account accumulated data concerning the synthesis and crystal structure of ferrites.     

e/π Separation analysis from L3 Calorimeter Beam Test

The L3 calorimeter beam test data were analyzed.An e/π separation scheme including "key cut" and "Δ cut" is suggested.We show that,using the scheme,in the energy range 4—20GeV,e/π separation is better than 93.7%.     

精确简洁解析的原子组态相互作用波函数的计算

使用广义Laguerre类型轨道,在组态相互作用框架内,发展并完善了一套精确、简洁、解析的原子(离子)波函数从头计算的Fortran程序,计算原子中电子的结构.通过对指定能态能量求其最小值实现对波函数节点位置和空间范围的优化,从而求出最优波函数.作为例子,计算了⁵G态下的Ti的能量最小值和优化波函数.     

基于云模型的自适应量子免疫克隆算法

利用云模型能够兼顾随机性和模糊性的品质,提出一种基于云模型的自适应量子免疫克隆算法.使用云算子代替通用的量子旋转门这一量子进化算法核心算子用于寻优变异操作;通过控制云算子间的协作,实现算法在进化过程中对搜索范围的动态调整,使算法具有较强的全局搜索能力;同时,补充针对性的优化方案,有效避免了算法陷入局部最优.对标准数值优化问题的仿真对比实验表明,该算法具有寻优能力强、搜索精度高、稳定度好等优点;对非线性系统的参数估计仿真实验,该算法也取得了对参数的高精度有效估计.     

1,8-二羟基-3-甲基-苯并［d,e］蒽酮的2D NMR研究

从中药芦荟(Aloe vera)中分离得到一个蒽酮类新化合物. 通过UV、IR、HREI-M S、¹H NMR和¹³C NMR及2D NMR(¹H-¹H COSY、HMBC、HMQC和J -resolved)方法， 鉴定其结构为：1,8- 二羟基-3-甲基-苯并［d,e］蒽酮. 文章的侧重点在于讨论该化合物的¹H和¹³C NMR信号的全归属.     

Green ultrasound-assisted extraction of carotenoids based on the bio-refinery concept using sunflower oil as an alternative solvent

A green, inexpensive and easy-to-use method for carotenoids extraction from fresh carrots assisted by ultrasound was designed in this work. Sunflower oil was applied as a substitute to organic solvents in this green ultrasound-assisted extraction (UAE): a process which is in line with green extraction and bio-refinery concepts. The processing procedure of this original UAE was first compared with conventional solvent extraction (CSE) using hexane as solvent. Moreover, the UAE optimal conditions for the subsequent comparison were optimized using response surface methodology (RSM) and ultra performance liquid chromatography – diode array detector – mass spectroscopy (UPLC–DAD–MS). The results showed that the UAE using sunflower as solvent has obtained its highest β-carotene yield (334.75 mg/l) in 20 min only, while CSE using hexane as solvent obtained a similar yield (321.35 mg/l) in 60 min. The green UAE performed under optimal extraction conditions (carrot to oil ratio of 2:10, ultrasonic intensity of 22.5 W cm^?2, temperature of 40 °C and sonication time of 20 min) gave the best yield of β-carotene.     

太阳能热气流系统内传热与流动的实验模拟

构建了小尺寸太阳能热气流发电的实验模型,测定了系统的温度随时间和空间的分布,测定了烟囱内的速度随时间的变化关系.实验结果表明:集热棚内温度分布和季节对系统传热与流动特性的影响符合理论分析结果,而由于烟囱较薄,散热较高,在烟囱内的温度降低显著.     

样品表面近红外光谱结合多类支持向量机快速鉴别枸杞子产地

采用便携式近红外光谱仪采集枸杞子表面不同部位的近红外漫反射光谱,结合多类支持向量机算法对枸杞子产地进行快速无损辨识。以识别率为评价指标进行光谱预处理方法的选择,为了消除样本划分偏性对结果的影响,本研究通过重复划分样本集多次建模与预测,利用识别率的统计结果考察各个光谱采集部位的建模结果。实验结果表明,原始数据经二阶导数加SG平滑处理后,所建模型具有良好的产地预测性能。除了枸杞子顶端部位外,其他部位模型的稳定性及准确性均较好,其外部验证识别率的中位数与平均值均大于97%。这表明利用枸杞子样品表面近红外光谱可实现产地的准确鉴别,便携式近红外光谱技术可作为中药材流通环节中的有效监控手段。     

飞秒激光剥蚀-多接收电感耦合等离子质谱原位微区分析青铜中铅同位素组成-以古铜钱币为例

建立了飞秒激光剥蚀-多接收电感耦合等离子质谱(fLA-MC-ICPMS)铅同位素原位微区分析方法,分别利用溶液法(SN-MC-ICPMS)和激光剥蚀法(fLA-MC-ICPMS)对15个铜(黄铜,青铜)国家标准物质进行了实验分析,测试的结果表明CuPb12(GBW02137)中Pb同位素组成非常均一,可作为以铜为基体的青铜、黄铜及铜矿中Pb同位素原位微区分析的外部参考物质。对CuPb12进行了112次fLA-MC-ICPMS Pb同位素分析测试,其加权平均值与溶液法测定的Pb同位素比值在2σ误差范围内完全一致,208 Pb/204 Pb和207Pb/206Pb比值的内部精度RSE分别小于90和40ppm,外部精度RSD分别小于60和30ppm。利用本实验室建立的fLA-MC-ICPMS分析方法对13个古铜钱币中Pb同位素进行了原位微区无损伤分析,测试结果表明,不同朝代古钱币中Pb同位素组成差异较大,即使同一朝代的古钱币其Pb同位素组成也不尽相同。     

使用改进的形状优化方法设计高均匀度的超导MRI磁体

针对设计带铁磁的超导磁共振成像磁体,提出了一种确定类的优化算法来优化极靴的形状以达到匀场的目的。这种方法集合了灵敏度分析、形状优化的理论和有限元方法计算非线性铁磁材料极靴的配置,来改善两个极靴之间大体积成像区的磁场均匀度。需要指出的是,本优化方法不受极靴初始形状的限制,均可以快速收敛。我们通过一个紧凑型的1.2T双平面磁共振磁体,展示了这种方法。