基于Karhunen-Loève变换和小波谱特征矢量量化的三维谱像数据压缩

提出了基于Karhunen Lo埁ｖｅ变换的小波谱特征矢量量化三维谱像数据压缩方法耍幔颍瑁酰睿澹?Lo埁ｖｅ变换 /小波变换 /小波谱特征矢量量化方法应用了Karhunen Lo埁ｖｅ变换的消除谱相关性优良性能 ,应用二维小波变换消除空间相关性 ,在小波变换域内应用二维集分割嵌入块编码和一维谱特征矢量量化对三维谱像数据压缩 ,获得较高的压缩性能。实验结果表明 :Karhunen Lo埁ｖｅ变换 /小波变换 /小波谱特征矢量量化编码比Karhunen Lo埁ｖｅ变换 /小波变换 /改进对块零树编码和Karhunen Lo埁ｖｅ变换 /小波变换 /快速矢量量化编码方法在同样压缩比条件下 ,峰值信噪比提高 2dB和 1dB以上 ,而速度提高了 1.5和 8倍 ,整体压缩性能有较大的提高     

Shape-dependent local internal stress of α-Cr2O3 nanocrystal fabricated by pulsed laser ablation

The α-Cr₂O₃ single-crystal nanocondensates were fabricated by pulsed laser ablation in air and characterized by analytical electron microscopy regarding shape-dependent local internal stress of the anisotropic crystal. The nanocondensates formed predominantly as rhombohedra with well-developed surfaces and occasionally hexagonal plate with thin edges and blunt corners. Such nanocondensates showed Raman shift for the CrO₆ polyhedra, indicating a local compressive stress up to ca. 4 GPa on the average. Careful analysis of the lattice fringes revealed a local compressive stress (0.5% strain) at the thin edge of the hexagonal plates and a local tensile stress (0.3–1.0% strain) near the relaxed , , and (0 0 0 1) surfaces of truncated rhombohedra. The combined effects of nanosize, capillarity force at sharp edge, and specific surface relaxation account for the retention of a local internal compressive stress built up in an anisotropic crystal during a very rapid heating–cooling process.     

Mössbauer study of Fe-B alloys containing Nd additives

The influence of a few percent neodynium additives to Fe-B alloy on the hyperfine parameters was investigated. It was found that Nd decreases the hyperfine field of amorphous Fe-B alloys. The samples annealed at temperatures between 600°C and 700°C contain α-Fe and Fe₃B phases. The average hyperfine field of Fe₃B phase increases with increasing Nd content and decreases with increasing annealing temperature. The average isomer shift of Fe₃B phase decreases with increasing Nd content. The experimental data show that the change of hyperfine parameters of the Fe₃B phase in the studied alloys is due to Nd atom.     

三价羰基硫离子(OCS3+)二体解离过程模拟研究

基于Gaussian量子化学模拟软件采用不同基组(6-31G^**和TZVP)下的B3LYP方法对基态三价羰基硫离子(OCS³⁺)的势能曲线进行分析,得到了三价羰基硫离子可能的解离通道.当固定C—O键长为OCS分子的构型键长时(2.1a.u.),通过模拟基态OCS³⁺离子沿着C—S键断裂的势能曲线,发现沿着C—S键的势能曲线是一个具有小势垒的排斥态;相反,当固定C—S键长为OCS分子的构型键长时(2.9a.u.),基态OCS³⁺离子沿着C—O键的势能曲线是一个势垒较大的排斥态,根据弗兰克-康登原理可知,基态OCS³⁺离子倾向于以断裂C—S键的方式进行解离.通过搜索基态OCS³⁺离子过渡态、IRC路径分析进一步确定了基态OCS³⁺离子具体的解离通道：OCS³⁺→CO⁺+S²⁺.最后通过对反应物和产物的Mulliken电荷分布和键长的分析,得到与前面一致的结论.     

Constrained Nonconvex Nonsmooth Optimization via Proximal Bundle Method

In this paper, we consider a constrained nonconvex nonsmooth optimization, in which both objective and constraint functions may not be convex or smooth. With the help of the penalty function, we transform the problem into an unconstrained one and design an algorithm in proximal bundle method in which local convexification of the penalty function is utilized to deal with it. We show that, if adding a special constraint qualification, the penalty function can be an exact one, and the sequence generated by our algorithm converges to the KKT points of the problem under a moderate assumption. Finally, some illustrative examples are given to show the good performance of our algorithm.     

Semiparametric regression analysis for clustered doubly-censored data

This paper considers clustered doubly-censored data that occur when there exist several correlated survival times of interest and only doubly censored data are available for each survival time. In this situation, one approach is to model the marginal distribution of failure times using semiparametric linear transformation models while leaving the dependence structure completely arbitrary. We demonstrate that the approach of Cai et al. (Biometrika 87:867–878, 2000) can be extended to clustered doubly censored data. We propose two estimators by using two different estimated censoring weights. A simulation study is conducted to investigate the proposed estimators.     

介质壁直线加速器加速单元间的电路耦合及解耦

中国工程物理研究院流体物理研究所研发的介质壁直线加速器是基于固态脉冲形成线、GaAs光导开关和高梯度绝缘介质壁三项关键技术的新型直线脉冲加速器。在加速器调试阶段,测量出获得加速的质子束流能量远低于预期值,在排除功率源负载能力因素之后,发现脉冲功率源因连接回路引起的电路耦合效应是导致束流能量低的主要原因。基于介质壁直线加速器加速单元放电回路结构的分析,确认了加速单元之间的电路耦合的必然性。并通过测量回路电流,研究了几种不同工作模式下的电路耦合效应。结合电路耦合的特点,给出了两种基于磁芯隔离的解耦方法,并测量了这两种方法的解耦效率。     

靶丸X射线数字图像的轮廓分析及功率谱评价

针对多层靶丸X射线数字图像的成像原理和轮廓边缘进行了理论分析;推导了由靶丸边缘特征点确定靶丸圆心和半径的精确最小二乘拟合算法;对于不同类型(阶跃状或屋顶状)的靶丸图像边缘,采用均化二阶微分算法或径向吸收强度最小二乘洛伦兹型拟合寻峰算法获取亚像素精度的靶丸圆周轮廓边缘数据;应用快速傅里叶变换算法对靶丸圆周轮廓数据进行分析,获得了靶丸表面外轮廓或内轮廓模数-功率谱特征曲线。     

基于四象限光位置检测器的同步光位置测量系统

为了克服现有双丝型检测器无法进行水平、垂直两个方向同时测量同步光位置的缺点,合肥光源新研制了基于四象限光位置检测器的同步光位置测量系统,并使用对数比处理技术进行后续的数据处理。通过分别对光学成像系统和四象限光位置检测器的标定,最终得到基于四象限光位置检测器的光位置测量系统的性能参数为:水平方向灵敏度0.471 2 mm-1,线性范围为±1.83 mm,垂直方向灵敏度0.635 0 mm-1,线性范围±1.32 mm。与合肥光源现有的光位置测量系统相比,具有较高的性价比。     

Tailoring interacting magnetic nanodots via dimensionality variation of mediating electrons

Nature produces ferromagnetic materials based on nearest neighbor exchange interaction between atomic spins. For artificially fabricated nanomagnets, it is those “small” magnetic energies, e.g. anisotropy, dipolar interaction and indirect exchange interaction that play crucial roles against the thermal fluctuation. We have developed strong capabilities to grow nanodot assemblies in ultrahigh vacuum with controllable size and density on/in both metallic and insulating templates. Based on our novel synthesis capability, we have studied artificial nanomagnets with tunable coupling strength via dimensionality control of the mediating electrons in one-dimensional (1-D), 2-D, and 3-D. We show that such kind of dimensional confinement provides a unique way to induce novel magnetic properties and to gain control of them. The research outlined in this work provides the science base to understand, modify, and manipulate the magnetic properties through dimensional confinement.